{"title":"6 Flute End Mills","description":"\u003cp\u003eSix-flute end mills in solid carbide, powder metal and HSS-E for finishing and for high-efficiency side milling in steels and harder materials. With light radial engagement, the extra edges carry a high feed per revolution and leave a fine wall finish. Not intended for full-width slotting, where chip room runs out.\u003c\/p\u003e\u003cp\u003eAll held in UK stock. Order before 4.30pm for same-day dispatch, or call our technical team on 01732 887334 for help choosing.\u003c\/p\u003e","products":[{"product_id":"1071022500","title":"Europa Tools HSS-E End Mill - Uncoated Multi Flute - Short Length - 25mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nEngineered for precision milling, the Europa Tools HSS-E End Mill delivers dependable performance in demanding machining tasks. Designed for professionals who value stability and control, this tool combines cobalt-enhanced steel with an optimized flute geometry to sustain sharp cutting edges under tough conditions.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial\u003c\/b\u003e: HSS-E (high-speed steel with cobalt) for improved heat resistance and wear life in challenging cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish\u003c\/b\u003e: Uncoated surface to promote efficient chip evacuation and reduced friction during operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlute design\u003c\/b\u003e: Multi-flute geometry that enhances chip removal and provides cutting stability, helping prevent clogging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength\u003c\/b\u003e: Short-length design increases rigidity and precision in confined pockets and tight tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting geometry\u003c\/b\u003e: Optimized flute and edge geometry for efficient material removal and smoother surface finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurability\u003c\/b\u003e: Built to perform consistently in demanding machining conditions, promoting longer tool life.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis end mill is ideal for users seeking precise, controlled cuts in challenging materials, with a focus on stability, surface quality, and tool longevity. The combination of HSS-E composition and a short, rigid form helps reduce deflection and cutting forces, while the uncoated finish supports efficient chip flow and cooler operation. Whether pocketing, profiling, or finishing passes, this tool delivers reliable performance and repeatable results.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257879867470,"sku":"1071022500","price":37.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/0001-3218275430901463529.png?v=1737115762"},{"product_id":"1071212500","title":"Europa Tools HSS-E End Mill - TiAlN Coated Multi Flute - Short Length - 25mm","description":"\u003cdiv\u003e\n\u003cp\u003eThe Europa Tools HSS-E End Mill with TiAlN coating is a compact, high-performance milling cutter designed for metalworking in tight spaces. Built for professionals, it delivers reliable wear resistance and precise cuts across steel, stainless steel, and high-temperature alloys.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eMulti-flute design\u003c\/b\u003e: Increased chip evacuation and smoother cutting, with reduced cutting forces for stable milling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTiAlN coating\u003c\/b\u003e: Enhances hardness and wear resistance, extending tool life in tough materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial\u003c\/b\u003e: HSS‑E (high-speed steel with cobalt) for superior heat resistance and durability in demanding applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength\u003c\/b\u003e: Short-length geometry provides increased rigidity in confined spaces, minimizing deflection during heavy cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApplications\u003c\/b\u003e: Optimized for steel, stainless steel, and high-temperature alloys, delivering reliable results across a range of metals.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eWith its TiAlN coating and rigid short-length design, this end mill delivers longer tool life, more consistent finishes, and greater stability in demanding milling jobs. The efficient chip evacuation from the multi-flute geometry supports higher feed rates and cleaner pockets, while the coating protects the cutting edge against wear and heat buildup. This makes it a dependable choice for pocketing, contouring, and slotting tasks in CNC machines and manual milling setups.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257880490062,"sku":"1071212500","price":61.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/0001-1084696080199441594.png?v=1737929215"},{"product_id":"1081022200","title":"Europa Tools HSS-E End Mill - Uncoated Multi Flute - Long Length - 22mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nEngineered for machinists who demand precision in deep cavities and complex profiles, the Europa Tools HSS-E End Mill delivers long-reach performance with enduring durability. This uncoated, cobalt-enhanced tool pairs robust cutting power with extended reach for challenging milling tasks.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDiameter\u003c\/b\u003e: 22 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial\u003c\/b\u003e: HSS-E cobalt (high-speed steel with cobalt) for superior heat and wear resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish\u003c\/b\u003e: Uncoated surface to enhance chip evacuation and reduce friction\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlute Design\u003c\/b\u003e: Multi-flute geometry for efficient chip removal and stable cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength\u003c\/b\u003e: Long length provides extended reach for hard-to-reach areas\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRigidity \u0026amp; Stability\u003c\/b\u003e: Optimized flute geometry and cutting edges promote precise, controlled cutting in demanding geometries\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApplications\u003c\/b\u003e: Ideal for deep cavities, profiling, pockets, and intricate milling where standard tools struggle\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis end mill is designed to deliver reliable performance across tough machining conditions. The HSS-E cobalt composition offers improved heat resistance and wear life, helping maintain sharpness and cutting efficiency even under challenging feeds and speeds. The uncoated finish supports smoother chip evacuation, reducing heat buildup and improving surface quality. The multi-flute configuration accelerates material removal while keeping the cut steady, and the long length ensures you can reach deep features without sacrificing control. Whether you’re shaping pockets, refining profiles, or pocket milling in hard metals, this tool helps you achieve consistent results with fewer tool changes and less downtime.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257881112654,"sku":"1081022200","price":60.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/0001-8803866096724067923.png?v=1738142727"},{"product_id":"1081022400","title":"Europa Tools HSS-E End Mill - Uncoated Multi Flute - Long Length - 24mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nEuropa Tools HSS-E End Mill is a long-length, 24 mm diameter milling tool designed for deep cavities and intricate profiling. Its cobalt-enhanced HSS-E composition delivers durable wear resistance and reliable performance under high cutting temperatures.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDiameter\u003c\/b\u003e: 24 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength\u003c\/b\u003e: Long flute length for extended reach into deep cavities and profiles\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial\u003c\/b\u003e: HSS-E (high-speed steel with cobalt) for enhanced heat resistance and durability\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoating\u003c\/b\u003e: Uncoated surface finish to improve chip evacuation and minimize friction\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlute Configuration\u003c\/b\u003e: Multi-flute design that facilitates efficient chip removal and stable cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting Geometry\u003c\/b\u003e: Optimized flute geometry and sharp cutting edge for smooth material removal\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRigidity \u0026amp; Stability\u003c\/b\u003e: Long length provides increased rigidity and precise control in hard-to-reach areas\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis end mill supports precise, controlled cutting in challenging pockets and channels, while the uncoated finish aids in clear chip flow and cooler operation. Ideal for operations that demand extended reach, reliable performance across materials, and a clean surface finish on complex geometries.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257881145422,"sku":"1081022400","price":67.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/0001-8803866096724067923.png?v=1738142727"},{"product_id":"1081022500","title":"Europa Tools HSS-E End Mill - Uncoated Multi Flute - Long Length - 25mm","description":"\u003cdiv\u003e\n\u003cp\u003eThe Europa Tools HSS-E End Mill is a long-reach, multi-flute milling cutter designed for metalworking pros tackling deep cavities and complex profiles. Crafted from high-speed steel with cobalt (HSS-E) and offered in an uncoated finish, it delivers durability, heat resistance, and reliable chip evacuation for demanding machining tasks.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial\u003c\/b\u003e: HSS-E (high-speed steel with cobalt) for superior wear resistance and heat tolerance during tough cutting conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoating\u003c\/b\u003e: Uncoated surface to enhance chip evacuation and reduce friction for smoother cuts\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlute design\u003c\/b\u003e: Multi-flute geometry that promotes efficient chip removal and stable cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength\u003c\/b\u003e: Long length provides extended reach into deep cavities and hard-to-reach profiles while maintaining rigidity\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting edge geometry\u003c\/b\u003e: Optimized flute geometry and edge design for effective material removal and clean finishes\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurability\u003c\/b\u003e: Built to endure high-temperature machining with consistent performance and longer tool life\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApplications\u003c\/b\u003e: Ideal for deep pocketing, contouring, slotting, and detailed profiling in metalwork\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatibility\u003c\/b\u003e: Designed to work with standard milling setups and common tool holders\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eEngineered to deliver steady performance in demanding conditions, this end mill reduces the risk of chip clogging and chatter, helping you achieve precise tolerances and smooth surface finishes in hard-to-reach areas. The uncoated finish improves chip evacuation and lowers friction, contributing to cooler operation and extended tool life. Whether you're machining deep slots, stepping contours, or intricate profiles, this HSS-E end mill offers reliable rigidity, efficient material removal, and consistent results.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257881178190,"sku":"1081022500","price":60.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/0001-8803866096724067923.png?v=1738142727"},{"product_id":"1081212200","title":"Europa Tools HSS-E End Mill - TiAlN Coated Multi Flute - Long Length - 22mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nEngineered for precision milling in demanding materials, the Europa Tools HSS-E End Mill with TiAlN coating delivers deep reach and dependable performance. It's ideal for machinists and workshops tackling steel, stainless steel, and high-temperature alloys, where deep pockets and complex profiles are common.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDiameter\u003c\/b\u003e: 22 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength\u003c\/b\u003e: Long length design for increased reach and deep milling\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial\u003c\/b\u003e: HSS-E (High-Speed Steel - enhanced for heat resistance)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoating\u003c\/b\u003e: TiAlN (Titanium Aluminum Nitride) coating for hardness and wear resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlute design\u003c\/b\u003e: Multi-flute geometry for efficient chip evacuation and stable cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApplications\u003c\/b\u003e: Suitable for steel, stainless steel, and high-temperature alloys\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis combination of geometry, coating, and core material translates into longer tool life and more consistent results across passes. The TiAlN coating reduces wear at higher cutting temperatures, while the multi-flute design helps evacuate chips quickly, minimizing chip welding and heat buildup. The long length enables reach into deep cavities, slots, and profiling operations without sacrificing rigidity, making it ideal for automotive components, mold profiles, and general metalworking tasks where precision matters.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257881669710,"sku":"1081212200","price":78.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/1081212200.png?v=1741859049"},{"product_id":"1081212400","title":"Europa Tools HSS-E End Mill - TiAlN Coated Multi Flute - Long Length - 24mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Europa Tools HSS-E End Mill is a TiAlN-coated, multi-flute cutting tool designed for machinists who need depth, reach, and reliable precision. With a long-length design and a 24 mm diameter, it excels at deep milling and profiling tasks while maintaining stable, efficient performance.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDiameter\u003c\/b\u003e: 24 mm end mill for substantial material removal and stable engagement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLong-length design\u003c\/b\u003e: extended reach that enables deep milling and profiling without repositioning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMulti-flute geometry\u003c\/b\u003e: optimized chip evacuation and reduced cutting forces for smoother operation and a cleaner finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTiAlN coating\u003c\/b\u003e: hardened, wear-resistant surface that extends tool life in steel, stainless steel, and high-temperature alloys.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHSS-E substrate\u003c\/b\u003e: high-speed steel with cobalt content delivers improved heat resistance and durability under demanding conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial versatility\u003c\/b\u003e: dependable performance across common machining materials, making it a practical choice for diverse projects.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis end mill supports precise, efficient deep milling and profiling, helping you maintain tight tolerances and smooth finishes even in challenging materials. The TiAlN coating protects the cutting edge from wear, while the robust HSS-E core handles heat and stress for longer tool life. Whether you’re tackling reinforced steel, stainless components, or high-temperature alloys, this 24 mm end mill delivers consistent results in rigorous workshop environments.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257881702478,"sku":"1081212400","price":85.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/1081212200_81503e7d-9641-485b-9299-eb28dd66d14a.png?v=1741863685"},{"product_id":"1081212500","title":"Europa Tools HSS-E End Mill - TiAlN Coated Multi Flute - Long Length - 25mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nMeet the Europa Tools HSS-E End Mill with TiAlN coating—a long-length, multi-flute cutter built for reliable deep milling and precise profiling in demanding metals. Designed for professionals who need reach, stability, and extended tool life, it delivers consistent performance across challenging materials.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSize\u003c\/b\u003e: 25 mm diameter end mill\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial\u003c\/b\u003e: HSS‑E (High‑Speed Steel‑Enhanced) substrate for excellent heat resistance and durability\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoating\u003c\/b\u003e: TiAlN coating boosts hardness and wear resistance for longer tool life\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlute Design\u003c\/b\u003e: Multi‑flute geometry enhances chip evacuation and reduces cutting forces for smoother operation\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength\u003c\/b\u003e: Long‑length geometry provides increased reach for deep milling and profiling\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial Compatibility\u003c\/b\u003e: Effective on steel, stainless steel, and high‑temperature alloys\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis end mill pairings TiAlN’s protective hard coating with a robust HSS‑E core to maintain sharpness under demanding cutting speeds and feeds. The multi‑flute design promotes rapid chip clearance, helping to minimize heat buildup and stabilize cutting grades. The extended reach of the long‑length geometry enables deep pockets, ramps, and complex contours without tool changes, improving productivity and finish quality. Ideal for shops and manufacturers that require dependable performance in tough metals with precise, repeatable results.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257881768014,"sku":"1081212500","price":84.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/1081212200_92780975-3d67-4088-b271-72e07749b286.png?v=1741863704"},{"product_id":"1181022600","title":"Europa Tools HSS-E Roughing End Mill - Uncoated Multi Flute - Short Length - 26mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nEngineered for efficient material removal in tight spaces, the Europa Tools HSS-E Roughing End Mill is designed for demanding metalworking tasks. Its uncoated, cobalt-enhanced construction and multi-flute geometry deliver durable cutting performance and reliable chip evacuation.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDiameter\u003c\/b\u003e: 26 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial\u003c\/b\u003e: HSS‑E (high-speed steel with cobalt) for improved heat resistance and wear resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoating\u003c\/b\u003e: Uncoated surface for enhanced chip flow and reduced friction\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlute design\u003c\/b\u003e: Multi-flute configuration to maximize material removal and smooth chip evacuation\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength\u003c\/b\u003e: Short length to excel in confined spaces and when tool reach is limited\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eType\u003c\/b\u003e: Roughing end mill for aggressive stock removal with steady performance\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis tool is built to deliver consistent results under demanding machining conditions, offering durability and stability without the complexity of coatings. The combination of cobalt-enhanced HSS and a robust multi-flute geometry helps maintain sharpness longer, while the uncoated finish promotes efficient chip clearance and cooler cutting. Ideal for shops needing reliable roughing performance in compact setups, it pairs well with rigorous milling tasks where space and performance matter most.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257885175886,"sku":"1181022600","price":75.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/0001-5543259984344095102.png?v=1738161649"},{"product_id":"1181022800","title":"Europa Tools HSS-E Roughing End Mill - Uncoated Multi Flute - Short Length - 28mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nEngineered for professional shops, the Europa Tools HSS-E Roughing End Mill is a compact, high-performance cutting tool designed for efficient material removal in tight spaces. With a 28 mm size and cobalt-infused HSS construction, it delivers durable cutting performance under demanding machining conditions.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial\u003c\/b\u003e: HSS-E (high-speed steel with cobalt) for superior heat resistance and wear resistance in tough cutting environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlute design\u003c\/b\u003e: Multi-flute geometry that enables efficient material removal and improved chip evacuation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength\u003c\/b\u003e: Short length profile optimized for confined work areas and limited clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish\u003c\/b\u003e: Uncoated surface to promote smoother chip flow and reduced friction during cutting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSize\u003c\/b\u003e: 28 mm diameter for robust roughing tasks and larger-scale stock removal.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis end mill is built to help you push through roughing passes with control and consistency. The multi-flute design minimizes cutting forces and enhances chip clearance, reducing the risk of chip buildup and heat during extended cuts. The cobalt-infused core stands up to heat and wear, extending tool life in demanding conditions. The uncoated finish further improves chip flow and surface finish, supporting reliable performance across multiple passes in metalworking applications.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257885208654,"sku":"1181022800","price":72.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/0001-5543259984344095102.png?v=1738161649"},{"product_id":"1181023000","title":"Europa Tools HSS-E Roughing End Mill - Uncoated Multi Flute - Short Length - 30mm","description":"\u003cdiv\u003e\n\u003cp\u003eThe Europa Tools HSS-E Roughing End Mill is a durable, high‑performance cutting tool designed for demanding metalworking roughing tasks. Its short length and 30 mm diameter make it ideal for space‑constrained setups where rigidity and chip evacuation matter most.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDiameter\u003c\/b\u003e: 30 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial\u003c\/b\u003e: HSS‑E cobalt alloy for enhanced heat resistance and wear life\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlute design\u003c\/b\u003e: Multi‑flute geometry for fast material removal and efficient chip evacuation\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength\u003c\/b\u003e: Short length to fit in limited spaces while maintaining rigidity\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoating\u003c\/b\u003e: Uncoated surface for improved chip flow and reduced friction\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApplication\u003c\/b\u003e: Roughing in metal milling applications, suitable for steel and other alloys\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eThis end mill is engineered to deliver consistent performance under tough cutting conditions. The cobalt-enhanced HSS core supports higher cutting speeds and better wear resistance, helping you achieve reliable material removal over extended tool life. The uncoated finish promotes easier chip flow, reducing heat build‑up and minimizing built‑up edge on tough materials. Ideal for machining in tight pockets, fixtures, or setups where tool reach is limited, it provides predictable results across multiple passes and job types.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257885306958,"sku":"1181023000","price":85.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/0001-5543259984344095102.png?v=1738161649"},{"product_id":"1181212600","title":"Europa Tools HSS-E Roughing End Mill -TiAlN Coated Multi Flute - Short Length -26mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nEngineered for demanding roughing work, the Europa Tools HSS-E Roughing End Mill with TiAlN coating delivers robust performance on mills and CNC centers. Designed for machinists who value rigidity and speed, this 26 mm diameter end mill combines tough construction with a smart coating to maximize material removal and tool life.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDiameter\u003c\/b\u003e: 26 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoating\u003c\/b\u003e: TiAlN for exceptional hardness, heat resistance, and lubricity\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSubstrate\u003c\/b\u003e: HSS-E (high-speed steel - extra) for enhanced toughness and durability\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlute design\u003c\/b\u003e: Multi-flute geometry promotes efficient chip evacuation and steady cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRigidity\u003c\/b\u003e: Short length construction increases rigidity and stability during heavy-duty roughing\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApplications\u003c\/b\u003e: Suitable for milling machines and CNC centers; ideal for steel, stainless steel, cast iron, and other alloys\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis end mill excels in high-velocity roughing passes, where maintaining tool life and preventing chip buildup are critical. The TiAlN coating reduces wear and heat generation, enabling higher cutting speeds without sacrificing surface finish. The compact, rigid form minimizes vibrations, delivering precise cuts even under challenging feeds and depths. Whether you’re removing large amounts of material from steel components or preparing cast iron workpieces for finishing, this end mill maintains consistent performance from start to finish.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257885765710,"sku":"1181212600","price":109.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/1181212500_e7db174e-3fbd-42ae-87b8-f7fc49eb39f9.png?v=1741863969"},{"product_id":"1181213000","title":"Europa Tools HSS-E Roughing End Mill -TiAlN Coated Multi Flute - Short Length -30mm","description":"\u003cdiv\u003e\n\u003cp\u003eThe Europa Tools HSS-E roughing end mill with TiAlN coating is built for high-demand metal milling on CNC machines and milling centers. Designed to tackle steel, stainless steel, cast iron, and other alloys, it delivers dependable performance with extended tool life.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cspan\u003eCoating\u003c\/span\u003e TiAlN\u003c\/b\u003e: The TiAlN coating provides exceptional hardness, heat resistance, and lubricity, enabling higher cutting speeds and reduced wear in tough metals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cspan\u003eMaterial\u003c\/span\u003e HSS‑E\u003c\/b\u003e: High‑speed steel with enhanced toughness offers reliable performance under heavy cutting conditions and demanding surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cspan\u003eFlute geometry\u003c\/span\u003e Multi‑flute design\u003c\/b\u003e: Multiple flutes promote efficient chip evacuation and smoother cutting, helping prevent chip build‑up during roughing passes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cspan\u003eLength\u003c\/span\u003e Short length\u003c\/b\u003e: A compact form increases rigidity and stability for precise, consistent cuts in challenging workpieces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cspan\u003eOverall length\u003c\/span\u003e 30 mm\u003c\/b\u003e: The short overall length supports aggressive feeds and reduced deflection, improving surface finish and dimensional accuracy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cspan\u003eCompatibility\u003c\/span\u003e Applications\u003c\/b\u003e: Suitable for use on milling machines and CNC machining centers, enabling reliable performance across a range of metalworking setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cspan\u003eMaterials it can cut\u003c\/span\u003e Materials\u003c\/b\u003e: Effective on steel, stainless steel, cast iron, and other alloys, making it a versatile choice for mixed‑material jobs.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eWith its TiAlN coating and rigid short‑length design, this end mill is engineered to boost productivity: you can run higher speeds without compromising tool life, maintain tighter tolerances through stable cuts, and reduce downtime from chip buildup. The multi‑flute geometry supports efficient material removal and cleaner finishes, while the robust HSS‑E core stands up to the demands of roughing operations on a variety of metals.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257885798478,"sku":"1181213000","price":128.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/1181212500_518b66bc-3b98-4fcb-b200-91a8f623dfc8.png?v=1741863942"},{"product_id":"1181212800","title":"Europa Tools HSS-E Roughing End Mill -TiAlN Coated Multi Flute - Short Length -28mm","description":"\u003cdiv\u003e\n\u003cp\u003eMeet the Europa Tools TiAlN-coated HSS-E roughing end mill — a purpose-built tool for CNC milling and heavy material removal. Designed for machinists and engineers tackling steel, stainless steel, cast iron, and other alloys, this compact end mill combines rigidity with efficient chip handling to boost productive cutting sessions.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCoating\u003c\/b\u003e: TiAlN-coated surface delivers exceptional hardness, high heat resistance, and excellent lubricity for faster cutting and longer tool life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSubstrate\u003c\/b\u003e: HSS-E (high-speed steel with cobalt) core provides toughness and stability under demanding cutting conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGeometry\u003c\/b\u003e: Multi-flute design offers efficient chip evacuation and steady cutting performance, reducing stalling and built-up edge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength\u003c\/b\u003e: Short 28 mm length enhances rigidity and rigidity-driven accuracy in tight setups and limited-clearance applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSize and suitability\u003c\/b\u003e: Specifically engineered for use in milling machines and CNC centers, adaptable to a range of common alloys including steel, stainless steel, and cast iron.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eThe combination of TiAlN coating, a robust HSS-E core, and a compact, rigid form factor translates into meaningful gains in material removal rates, edge life, and dimensional stability. The end mill is well-suited for roughing passes where aggressive chip loads are needed, followed by finishing steps to achieve a superior surface finish. Its design helps minimize heat buildup in the cut zone, keeps chips flowing away from the flutes, and supports consistent performance across multiple passes and setups.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257885831246,"sku":"1181212800","price":106.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/1181212500_37aef8d7-fbe5-4b41-ad74-ed9edcb36199.png?v=1741863956"},{"product_id":"1191022600","title":"Europa Tools HSS-E Roughing End Mill - Uncoated Multi Flute - Long Length - 26mm","description":"\u003cdiv\u003e\n\u003cp\u003eDesigned for precision roughing in CNC milling, the Europa Tools HSS-E Roughing End Mill (26 mm diameter) is built for professionals who need fast material removal in deep pockets and hard-to-reach areas. Its cobalt-enhanced HSS-E composition and uncoated flute deliver durable performance and smooth chip flow under demanding cutting conditions.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDiameter\u003c\/b\u003e: 26 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlute design\u003c\/b\u003e: Multi-flute geometry for aggressive material removal and improved chip evacuation\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength\u003c\/b\u003e: Long length provides extended reach for deep cuts and difficult-to-access workpieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial\u003c\/b\u003e: HSS-E (high-speed steel with cobalt) for enhanced heat resistance and wear life\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoating\/Finish\u003c\/b\u003e: Uncoated surface to maximize chip flow and reduce friction\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApplication\u003c\/b\u003e: Roughing end mill optimized for roughing passes and deeper cavity work\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eIn use, the end mill maintains sharpness longer under high-temperature cutting, enabling higher material removal rates without sacrificing tool life. The uncoated surface lowers cutting resistance, reducing built-up edge and helping achieve more consistent chip control. The extended reach opens possibilities for deep pockets and interior channels without additional tool changes, while the multi-flute geometry balances aggressive stock removal with steady, reliable performance on roughing passes.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257886486606,"sku":"1191022600","price":77.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/0001-8192502471308689819.png?v=1738163192"},{"product_id":"1191023000","title":"Europa Tools HSS-E Roughing End Mill - Uncoated Multi Flute - Long Length - 30mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Europa Tools HSS-E Roughing End Mill is designed for professionals who need robust, high‑performance metal removal with extended reach. Built from cobalt-enhanced high-speed steel and offered in a long-length form, it tackles demanding milling tasks with steady reliability.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSize\u003c\/b\u003e: 30 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial\u003c\/b\u003e: HSS‑E (high‑speed steel with cobalt) for exceptional durability, heat resistance, and wear resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoating\u003c\/b\u003e: Uncoated surface to promote efficient chip flow and reduce friction\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlute design\u003c\/b\u003e: Multi‑flute geometry for aggressive material removal and effective chip evacuation\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength\u003c\/b\u003e: Long length provides extended reach for deeper cuts and access to hard‑to‑reach features\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApplication\u003c\/b\u003e: Ideal for roughing operations that require high stock removal in tough materials\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis end mill is engineered to maintain performance under demanding cutting conditions. The cobalt content in HSS‑E enhances heat tolerance and wear resistance, helping to preserve edge life during heavy milling. The uncoated finish reduces friction and improves chip flow, contributing to smoother cuts and better surface outcomes on roughing passes. The combination of a long reach and multi‑flute geometry makes it well suited for deep slots, pockets, and intricate cavities where standard tools struggle to reach.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257886519374,"sku":"1191023000","price":104.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/0001-8192502471308689819.png?v=1738163192"},{"product_id":"1191022800","title":"Europa Tools HSS-E Roughing End Mill - Uncoated Multi Flute - Long Length - 28mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nEngineered for heavy-duty metal removal, the Europa Tools HSS-E Roughing End Mill (28 mm diameter) delivers fast material removal and extended reach for deep pockets and hard-to-reach features. Designed for professionals who demand reliable performance in demanding machining environments.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDiameter\u003c\/b\u003e: 28 mm cutting diameter for robust roughing and high material removal rates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial\u003c\/b\u003e: HSS-E (high-speed steel with cobalt) for improved heat resistance and wear life in tough metals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish\u003c\/b\u003e: Uncoated surface to promote smoother chip flow and reduce friction during cutting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlute Geometry\u003c\/b\u003e: Multi-flute design that enhances chip evacuation and provides steady cutting in challenging workpieces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength\u003c\/b\u003e: Long length offering extended reach for deeper cuts and access to recessed features without repositioning tooling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApplication\u003c\/b\u003e: Ideal for roughing operations on steels and alloys, delivering dependable performance in demanding machining tasks.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nWith a cobalt-infused HSS core, this end mill maintains sharpness under higher cutting temperatures, supporting aggressive feeds and deeper cuts. The uncoated finish further improves chip clearance and reduces built-up edge, contributing to consistent material removal and smoother initial passes. Built for machinists and shop floors that prioritize durability, predictable results, and fewer tool changes during complex milling jobs.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257886552142,"sku":"1191022800","price":92.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/0001-8192502471308689819.png?v=1738163192"},{"product_id":"1191212800","title":"Europa Tools HSS-E Roughing End Mill -TiAlN Coated Multi Flute - Long Length -28mm","description":"\u003cdiv\u003e\n\u003cp\u003eThe Europa Tools HSS-E Roughing End Mill with TiAlN coating is built for reliable, heavy-duty roughing in metalworking. Its long length and multi-flute design make it a smart choice for machinists tackling deep cavities and extended cutting depths.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDiameter\u003c\/b\u003e: 28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoating\u003c\/b\u003e: TiAlN coating enhances hardness, heat resistance, and lubricity for longer tool life and improved cutting performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBase material\u003c\/b\u003e: HSS‑E substrate for toughness and wear resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlute design\u003c\/b\u003e: Multi-flute geometry for efficient chip evacuation and smoother cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength\u003c\/b\u003e: Long length provides added reach for deep cavity machining\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eWith the TiAlN coating reducing wear and helping maintain edge integrity at higher temperatures, this end mill delivers consistent performance across long cutting sequences. The multi-flute design reduces the risk of chip clogging and heat buildup, while the extended reach of the long length allows access to deep pockets without sacrificing rigidity. This combination supports faster material removal, better surface finishes, and fewer tool changes in demanding roughing applications.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257886945358,"sku":"1191212800","price":97.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/0001-3669762261756636819.png?v=1737928709"},{"product_id":"1191213200","title":"Europa Tools HSS-E Roughing End Mill -TiAlN Coated Multi Flute - Long Length -32mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nEngineered for metalworking professionals who demand durability and efficiency in roughing, the Europa Tools HSS‑E Roughing End Mill with TiAlN coating delivers extended tool life and consistent performance on deep cavities and heavy material removal. Its long length and multi‑flute geometry keep chips moving and extend reach for challenging cuts.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDiameter\u003c\/b\u003e: 32 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial\u003c\/b\u003e: HSS‑E (high‑speed steel for robust cutting in metals)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoating\u003c\/b\u003e: TiAlN coating that enhances hardness, heat resistance, and lubricity\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlute Design\u003c\/b\u003e: Multi‑flute configuration for efficient chip evacuation and smoother cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength\u003c\/b\u003e: Long length enables access to deep pockets and extended cutting depths\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApplication\u003c\/b\u003e: Roughing end mill designed for aggressive material removal and reliable performance\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis tool’s TiAlN coating helps it stay sharp under high temperatures, reducing downtime from premature wear. The combination of a 32 mm diameter, long reach, and multiple flutes makes it well suited for deep cavity milling and demanding roughing passes, where efficient chip clearance and steady cutting matter most. For shops seeking a dependable solution for heavy metal removal, this end mill offers consistent performance and extended life across a range of milling tasks.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257886978126,"sku":"1191213200","price":176.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/0001-3669762261756636819.png?v=1737928709"},{"product_id":"1191214000","title":"Europa Tools HSS-E Roughing End Mill -TiAlN Coated Multi Flute - Long Length -40mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Europa Tools HSS-E Roughing End Mill with TiAlN coating is built for professionals who demand reliability in heavy-duty milling. Designed for long reach and consistent roughing performance, it delivers extended tool life and steadier cuts in deep cavities.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCoating\u003c\/b\u003e: TiAlN coating enhances hardness, heat resistance, and lubricity for longer tool life and smoother cutting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSubstrate\u003c\/b\u003e: HSS-E base (high-speed steel with enhanced properties) for toughness and wear resistance in demanding applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlute design\u003c\/b\u003e: Multi-flute geometry facilitates efficient chip evacuation and reduces the risk of chip clogging during heavy material removal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength\u003c\/b\u003e: Long reach with a 40mm length, ideal for deep cavity machining and applications requiring extended cutting depths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApplication\u003c\/b\u003e: Specifically suited for roughing operations where aggressive material removal and consistent performance are essential.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis combination of TiAlN coating, robust HSS-E core, and multi-flute engineering translates into longer tool life, reduced downtime, and more predictable results in challenging milling tasks. The added reach enables machining into deep pockets and slots without switching tools, while efficient chip evacuation helps maintain steady temperatures and smoother cuts in roughing passes. Ideal for shops that prioritize durability, precision, and efficient metal removal.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257887010894,"sku":"1191214000","price":195.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/0001-3669762261756636819.png?v=1737928709"},{"product_id":"1211023000","title":"Europa Tools HSS-E Roughing End Mill - Uncoated Multi Flute Fine Pitch - Short Length - 30mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Europa Tools HSS-E Roughing End Mill is a compact, cobalt-enhanced cutter designed for reliable, high-performance roughing in metalworking tasks. Its short 30mm length and robust construction make it ideal for tight spaces and demanding machining conditions.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial\u003c\/b\u003e: HSS-E (high-speed steel with cobalt) for enhanced heat resistance and wear durability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFinish\u003c\/b\u003e: Uncoated design to promote improved chip flow and reduced friction during cutting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlute design\u003c\/b\u003e: Multi-flute with a fine pitch for steady material removal and a smoother initial surface finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 30mm short length optimized for tight-clearance applications and compact setups.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurability\u003c\/b\u003e: Built to withstand demanding machining conditions, delivering consistent performance over extended tool life.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis end mill excels in roughing passes where you need efficient material removal without sacrificing control. The combination of HSS-E composition and an uncoated finish helps manage heat and chip flow, supporting stable cuts and predictable wear. Its compact length makes it a practical choice for pocketing, slotting, and other high-precision roughing tasks in metalworking environments.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257887371342,"sku":"1211023000","price":96.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/0001-5399145313361433619.png?v=1738592203"},{"product_id":"1211213000","title":"Europa Tools HSS-E Roughing End Mill -TiAlN Coated Multi Flute Fine Pitch -Short Length - 30mm","description":"\u003cdiv\u003e\n\u003cp\u003eEuropa Tools HSS-E Roughing End Mill with TiAlN coating is built for demanding metalworking tasks, delivering robust material removal with long tool life. Designed for precision and reliability, it’s ideal for machinists and workshop pros who need consistent performance in tough metals, even in tight spaces thanks to its compact 30 mm length.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCoating\u003c\/b\u003e: TiAlN coating provides heightened hardness, excellent heat resistance, and improved lubricity to sustain higher cutting speeds and extend tool life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSubstrate\u003c\/b\u003e: HSS-E base (high-speed steel with enhanced alloying) for durable wear resistance under heavy cutting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlute configuration\u003c\/b\u003e: Multi-flute design enables efficient chip evacuation and smoother cutting action during roughing passes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePitch\u003c\/b\u003e: Fine-pitch geometry supports stable chip load and helps achieve a cleaner surface finish in challenging materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength\u003c\/b\u003e: Short length promotes rigidity and cutting stability, reducing deflection in confined slots and pockets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 30 mm, optimizing rigidity while maintaining accessibility in tight workspaces.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eBy combining the TiAlN coating with a tough HSS-E core, this end mill delivers reliable, predictable performance across demanding roughing tasks. The enhanced heat resistance helps maintain sharpness during extended passes, while the coating minimizes built-up edge and friction. The result is higher productivity through faster material removal, better surface finish, and fewer tool changes, making it a practical choice for die\/mold work, general metalworking, and precision pocketing where stability and finish matter.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257887699022,"sku":"1211213000","price":122.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/1211211800_7d0d631a-0f03-41db-bb78-65e16f9c2841.png?v=1741863922"},{"product_id":"1212401800","title":"Europa Tools Powder Metal Roughing End Mill - Multi Flute Sabre Rougher - Extended Neck 45° Helix Fine Pitch - 18mm","description":"\u003cdiv\u003e\n\u003cp\u003eThe Europa Tools Powder Metal Roughing End Mill is a high-performance cutting tool designed for machinists who need fast, robust roughing in deep pockets and hard-to-reach areas. With an extended neck, multi-flute sabre rougher geometry, and a 45° helix, it delivers aggressive material removal and smoother cuts in demanding milling applications.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDiameter\u003c\/b\u003e: 18 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial\u003c\/b\u003e: Powder metal construction for exceptional durability, wear resistance, and heat tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRoughing geometry\u003c\/b\u003e: Multi-flute sabre rougher profile for efficient chip clearance and aggressive cutting action\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNeck design\u003c\/b\u003e: Extended neck for increased reach into deep cavities and tight areas\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHelix angle\u003c\/b\u003e: 45° for improved chip evacuation and smoother cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePitch\u003c\/b\u003e: Fine pitch supporting stable cuts and better surface finish\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eThe combination of extended reach and sabre rougher geometry allows you to remove material quickly while maintaining control in challenging geometries. Powder metal offers a balance of hardness and toughness, helping the tool stand up to demanding roughing work and heat generation without deformed cutting edges. The 45° helix further aids chip flow, reducing built-up edge and promoting a steadier cut, which translates to more consistent tolerances and a cleaner finish in subsequent finishing passes.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257887993934,"sku":"1212401800","price":57.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/0002-659105967030874036.png?v=1737975479"},{"product_id":"1212402000","title":"Europa Tools Powder Metal Roughing End Mill - Multi Flute Sabre Rougher - Extended Neck 45° Helix Fine Pitch - 20mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nEuropa Tools' Powder Metal Roughing End Mill is engineered for aggressive material removal in demanding CNC roughing applications. Its extended neck and sabre rougher geometry provide deep reach and efficient cutting, making it ideal for job shops and high-demand machining.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDiameter\u003c\/b\u003e: 20 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial\u003c\/b\u003e: Powder metal construction for outstanding durability, wear resistance, and heat tolerance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRoughing design\u003c\/b\u003e: Multi-flute sabre rougher profile for aggressive, efficient material removal\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNeck design\u003c\/b\u003e: Extended neck enables deeper cuts and access to hard-to-reach pockets\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHelix angle\u003c\/b\u003e: 45° helix for smoother cutting action and improved chip evacuation\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePitch\u003c\/b\u003e: Fine pitch that balances cutting forces with steady, controlled removal\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eChip evacuation\u003c\/b\u003e: Optimized flute geometry helps clear chips and reduce clogging during heavy cuts\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApplications\u003c\/b\u003e: Suited to roughing operations in challenging machining environments requiring depth and reach\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis end mill delivers practical advantages: faster material removal with controlled chip flow, stable performance in extended reach scenarios, and extended tool life thanks to its durable powder metal composition. The combination of a 45° helix and fine pitch minimizes cutting pressure and heat buildup, helping you maintain consistent results across tough jobs and reduce downtime between tool changes.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257888059470,"sku":"1212402000","price":73.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/0002-659105967030874036.png?v=1737975479"},{"product_id":"1212402500","title":"Europa Tools Powder Metal Roughing End Mill - Multi Flute Sabre Rougher - Extended Neck 45° Helix Fine Pitch - 25mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Europa Tools Powder Metal Roughing End Mill is a precision-engineered tool designed for professionals who demand fast, reliable material removal without sacrificing surface quality. With a 25 mm diameter and an extended neck, it excels at deep cuts and hard-to-reach pockets, delivering consistent performance in demanding machining environments.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction\u003c\/b\u003e: Powder metal body for exceptional durability, wear resistance, and heat tolerance across tough cutting conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGeometry\u003c\/b\u003e: Multi-flute sabre rougher profile that delivers aggressive removal with controlled chatter and smooth finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eNeck Design\u003c\/b\u003e: Extended neck provides additional reach for deeper cavities and undercuts without repositioning the workpiece.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHelix Angle\u003c\/b\u003e: 45° helix for efficient chip evacuation, reduced cutting forces, and cleaner cuts in a variety of materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePitch\u003c\/b\u003e: Fine pitch promotes stable engagement, better surface finish, and predictable tool life under heavy roughing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSize\u003c\/b\u003e: 25 mm diameter built for robust roughing performance in practical shop settings.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis end mill is tailored for high-removal-rate roughing while maintaining rigidity and control. The combination of powder metal durability, sabre rougher geometry, and a 45° helix translates to fewer passes, smoother chip flow, and flatter surfaces on the parts you depend on. Whether you’re deepening slots, pocketing complex features, or machining demanding materials, this tool delivers dependable, repeatable results with extended service life.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257888125006,"sku":"1212402500","price":108.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/0002-659105967030874036.png?v=1737975479"},{"product_id":"1221022800","title":"Europa Tools HSS-E Roughing End Mill - Uncoated Multi Flute Fine Pitch - LongLength - 28mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Europa Tools HSS-E Roughing End Mill is built for professionals who need robust performance in demanding machining tasks. With a long reach and a high-durability cobalt-enhanced core, it tackles deep cuts and hard-to-reach pockets with confidence.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDiameter\u003c\/b\u003e: 28 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial\u003c\/b\u003e: HSS-E (high-speed steel with cobalt) for superior heat resistance and wear life\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoating\u003c\/b\u003e: Uncoated finish to promote efficient chip flow and reduced friction\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlute design\u003c\/b\u003e: Multi-flute with fine pitch for efficient material removal and smoother finishes\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength\u003c\/b\u003e: Long length for extended reach into deep cavities and hard-to-access areas\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApplications\u003c\/b\u003e: Ideal for roughing operations in tougher metals where depth of cut and chip evacuation matter\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis end mill delivers reliable performance under demanding conditions: the fine-pitch, multi-flute geometry boosts material removal rates while maintaining a quality surface finish. The uncoated surface aids chip flow, helping to reduce heat buildup and extend tool life, even in tougher metals. The extended length minimizes setup changes, enabling deeper pockets and complex geometries to be machined in fewer passes.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257888747598,"sku":"1221022800","price":114.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/Europa_Tools_HSS-E_Roughing_End_Mill_-_Uncoated_Multi_Flute_Fine_Pitch_7084bfd6-b5ed-4198-b785-d6142396c555.png?v=1741863109"},{"product_id":"1221023000","title":"Europa Tools HSS-E Roughing End Mill - Uncoated Multi Flute Fine Pitch - LongLength - 30mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Europa Tools HSS-E Roughing End Mill is built for serious metalworking tasks, delivering fast material removal with a clean, consistent finish. Designed for professionals who need reach and reliability, this tool excels in deep cavities and challenging cuts.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDiameter\u003c\/b\u003e: 30 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLength\u003c\/b\u003e: LongLength for extended reach into deep pockets and hard-to-access areas\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial\u003c\/b\u003e: HSS‑E (high‑speed steel with cobalt) for superior durability, heat resistance, and wear resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoating\u003c\/b\u003e: Uncoated to promote improved chip flow and reduced friction during cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlute Design\u003c\/b\u003e: Multi‑flute with a fine pitch for efficient material removal and smoother surface finish\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApplication\u003c\/b\u003e: Optimized for roughing operations in metals where depth and reach are required\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nWith its uncoated, cobalt-enhanced composition and precise fine-pitch geometry, this end mill maintains cutting efficiency under higher temperatures while delivering a more predictable tool life. The long, robust flute design supports deep roughing passes, helping you remove material quickly without sacrificing control or surface quality.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Europa","offers":[{"title":"Default Title","offer_id":40257888813134,"sku":"1221023000","price":129.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/Europa_Tools_HSS-E_Roughing_End_Mill_-_Uncoated_Multi_Flute_Fine_Pitch_48e9df76-827c-4c5d-9247-113309bb943a.png?v=1741863178"},{"product_id":"we506060","title":"Widin Carbide Square End Mill For Mold \u0026 Die - 6 Flute High Helix (45°) - 6mm x15mm x 60mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Widin Carbide Square End Mill for Mold \u0026amp; Die is a precision cutting tool designed for demanding mold-making and die-work. This 6-flute, 45° high-helix end mill features a 6 mm cutting diameter with a 15 mm cutting length and a 60 mm overall length, built to tackle tight pockets and complex profiles with consistent results. The cutting diameter ranges from 6.0 mm to 20.0 mm, with additional length options available to fit your specific application. Crafted from premium carbide and finished with a W coating, it resists wear and stays stable through tough cuts, while a tight tolerance of +0\/−0.03 mm ensures repeatable accuracy pass after pass for reliable mold and die machining. It’s well-suited for work on pre-hardened steel, alloy steel, and carbon steel up to 55 HRc.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e6-Flute High-Helix Design (45°)\u003c\/b\u003e: Reduces cutting load and delivers smooth cutting with improved chip evacuation, enabling faster feeds and cleaner pocket shapes in hard steels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTight Cutting Diameter Tolerance +0\/−0.03 mm\u003c\/b\u003e: Ensures consistent feature sizes and repeatable results, reducing rework and scrap in intricate mold and die components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eW Coated Carbide\u003c\/b\u003e: Extends tool life and maintains machining stability under heat and wear, delivering durable performance across multiple passes in demanding materials.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nIn practice, this end mill helps you speed up production without compromising accuracy. The combination of 6 flutes, a 45° high-helix, and the W coating provides efficient material removal, stable cutting conditions, and long tool life, which translates to fewer tool changes and less downtime. Whether you’re roughing cavities or finishing detailed features in pre-hardened, alloy, or carbon steel, you’ll achieve consistent results, better surface quality, and more predictable cycles across mold and die projects.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Widin","offers":[{"title":"Default Title","offer_id":40257976762446,"sku":"UE506060","price":25.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/we506_e50fa6f9-5070-43b4-9e54-8b5cea69f59d.jpg?v=1690276652"},{"product_id":"we50606030","title":"Widin Carbide Square End Mill For Mold \u0026 Die - 6 Flute High Helix (45°) - 6mm x30mm x 80mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nWidin Carbide Square End Mill for Mold \u0026amp; Die is a versatile cutting tool engineered for precision mold and die work. Designed for engineers, machinists, and production teams, this 6-flute square-end mill uses a 45° high-helix geometry to deliver smooth cuts, clean cavities, and consistent results across a range of materials. Diameter options span from 6.0 mm to 20.0 mm with various lengths available to match your machining setup, while a tight tolerance of +0 \/ -0.03 mm ensures repeatable accuracy in every pass.\n\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSix-Flute Design for Reduced Cutting Load and Efficient Chip Evacuation\u003c\/b\u003e: More flutes share cutting forces, enabling smoother operation, lowered cutting resistance, and better chip flow for cleaner holes and pockets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHigh-Helix Geometry (45°) for Smooth Cutting and Fine Mold Finish\u003c\/b\u003e: The pronounced helix improves chip control and heat removal, helping you achieve finer surface finishes in mold and die work and reducing the need for additional finishing passes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eW Coated Carbide for Longer Tool Life and Stable Performance\u003c\/b\u003e: The W coating enhances wear resistance and machining stability, extending tool life and delivering reliable, repeatable results even on demanding mold- and die-making tasks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\nThis end mill is well-suited for mold and die applications that involve pre-hardened steel, alloy steel, and carbon steel, delivering consistent performance with tight diameter control. The combination of robust carbide, coating protection, and a geometry optimized for aggressive chip evacuation helps reduce downtime, improve throughput, and produce dependable results across repeated production runs.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Widin","offers":[{"title":"Default Title","offer_id":40257976795214,"sku":"UE50606030","price":28.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/we506_a1f438f8-4bb6-47ec-88dc-63edc456f2f6.jpg?v=1690276653"},{"product_id":"we50606020","title":"Widin Carbide Square End Mill For Mold \u0026 Die - 6 Flute High Helix (45°) - 6mm x20mm x 70mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nWidin Carbide Square End Mill For Mold \u0026amp; Die is a precision carbide milling tool designed for mold and die work. The 6-flute design with a 45° high-helix geometry delivers smooth cutting and efficient chip evacuation, even in demanding tooling applications.\n\u003c\/p\u003e \u003cp\u003e\nThis model features a cutting diameter of 6 mm with options across a range to 20 mm, a 20 mm cutting length, and a 70 mm overall length. It utilizes a tight diameter tolerance of +0\/-0.03 mm to ensure repeatable results, and includes a family of lengths to match your cavity or pocketing needs.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e6-Flute High-Helix Design for Efficient Cutting\u003c\/b\u003e: Reduces cutting load and enables smooth, fast material removal with improved chip evacuation in mold and die steels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePrecise Diameter Tolerance for Consistent Results\u003c\/b\u003e: Tight tolerance of +0\/-0.03 mm ensures repeatable cuts across passes and predictable outcomes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eW-Coated, Durable Carbide for Long Tool Life\u003c\/b\u003e: Premium carbide with W coating delivers wear resistance and machining stability, ideal for mold\/die work below 55 HRc and with pre-hardened steel, alloy steel, and carbon steel.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nBy combining the 6-flute high-helix geometry, precise tolerance, and tough W-coated carbide, this end mill helps you achieve reliable, repeatable results with fewer tool changes and less rework. It supports efficient workflows in mold and die production by enabling cleaner finishes, tighter tolerances, and longer intervals between sharpening, especially when working with steels below 55 HRc and pre-hardened materials.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Widin","offers":[{"title":"Default Title","offer_id":40257976827982,"sku":"UE50606020","price":27.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/we506_632705c1-1a82-44a8-a3b6-97dacbc95b87.jpg?v=1690276654"},{"product_id":"we50606030110","title":"Widin Carbide Square End Mill For Mold \u0026 Die - 6 Flute High Helix (45°) - 6mm x30mm x 110mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nWidin Carbide Square End Mill for Mold \u0026amp; Die is a precision cutting tool built for mold makers, die shops, and anyone needing accurate pocketing and finishing in steel and alloy work.\n\u003c\/p\u003e \u003cp\u003e\nDesigned with a 6-flute high-helix (45°) geometry, it delivers smooth cuts and reliable chip evacuation. This model features a 6.0 mm cutting diameter, 30 mm cutting length, and 110 mm overall length, and is part of a family that covers diameters from 6.0–20.0 mm with various cutting and overall lengths to fit different machines and jobs. It also includes a tight tolerance of +0\/-0.03 mm and a W coating to extend tool life and stabilize performance during high-speed cuts.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e6- flute, 45° high-helix geometry\u003c\/b\u003e: Delivers smoother cuts, lowers cutting loads, and enhances chip evacuation for reliable, precision-heavy pocketing and finishing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTight tolerance and W coating\u003c\/b\u003e: +0\/-0.03 mm ensures repeatable, accurate results; the W coating improves wear resistance and machining stability for longer tool life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eWide range and versatile sizing\u003c\/b\u003e: Available in 6.0–20.0 mm diameters with multiple cutting and overall lengths to fit a broad set of molds, dies, and pocketing tasks.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis end mill delivers dependable performance in mold and die work, including pre-hardened steels and common alloy and carbon steels, helping you achieve precise features, reduce rework, and maintain steady productivity across demanding applications.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Widin","offers":[{"title":"Default Title","offer_id":40257976860750,"sku":"UE50606030110","price":32.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/we506_698a255b-d0a1-4e09-9998-4f26f0c45a7e.jpg?v=1690276653"},{"product_id":"we506080","title":"Widin Carbide Square End Mill For Mold \u0026 Die - 6 Flute High Helix (45°) - 8mm x20mm x 70mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Widin Carbide Square End Mill is engineered for mold and die machining, delivering precise, repeatable results in every cut. This 8 mm diameter tool—with a 20 mm cutting length and 70 mm overall length—is built to perform reliably in demanding milling tasks and produce clean, accurate finishes.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eTight diameter tolerance for consistent precision\u003c\/b\u003e: +0\/-0.03 mm ensures repeatable cuts and reduces rework, even on close-tolerance features.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e6-flute high-helix design (45°)\u003c\/b\u003e: The 6-flute geometry lowers cutting load and enhances chip evacuation, delivering smoother finishes and faster cycle times.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eW-coated carbide for long tool life\u003c\/b\u003e: The carbide core with W coating boosts wear resistance and machining stability, making it ideal for mold\/die work below 55 HRc and for pre-hardened, alloy, and carbon steels.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nDesigned to improve workflow and outcomes, this end mill helps you achieve reliable results with fewer passes and less downtime. Its robust carbide construction, 45° high-helix geometry, and W coating support consistent performance across mold and die projects—from pre-hardened steel to carbon and alloy steels up to 55 HRc—delivering repeatable quality you're confident in.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Widin","offers":[{"title":"Default Title","offer_id":40257976893518,"sku":"UE506080","price":47.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/we506_1a1a5eb4-f410-4514-b897-3b67ab30f09e.jpg?v=1690276653"},{"product_id":"we50608030","title":"Widin Carbide Square End Mill For Mold \u0026 Die - 6 Flute High Helix (45°) - 8mm x30mm x 80mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nWidin’s Carbide Square End Mill is a precision tool built for mold and die work, delivering reliable material removal with consistent results. Designed for engineers, machinists, and hobbyists alike, this 6‑flute carbide end mill combines strong wear resistance with a smooth cutting action to handle pre-hardened steel, alloy steel, and carbon steel—especially in molds and dies under 55 HRc. The model in this listing features an 8 mm diameter with a cutting length of 30 mm and an overall length of 80 mm, offering a balanced footprint for both detailed contouring and larger pocketing tasks.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eTight diameter tolerance\u003c\/b\u003e: ±0.03 mm range ensures highly consistent, repeatable cuts and tight feature accuracy across multiple passes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e6-flute high‑helix design\u003c\/b\u003e: Reduces cutting load, enables smoother penetration, and improves chip evacuation for cleaner finishes and less chatter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePremium carbide with W coating\u003c\/b\u003e: Delivers enhanced wear resistance and longer tool life, maintaining stable performance when machining mold and die steels, including pre-hardened and alloy grades, as well as carbon steel.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis end mill is tailored to streamline mold and die workflows: it delivers precise pocketing and finishing with fewer passes, minimizes downtime from tool wear, and provides dependable results across a range of compatible materials. With its robust construction and coating-enhanced durability, you can rely on consistent performance, even in demanding applications, helping you complete projects faster with high-quality surface finishes and tight tolerances.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Widin","offers":[{"title":"Default Title","offer_id":40257976926286,"sku":"UE50608030","price":49.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/we506_dbcd6428-b675-4b4b-8e1a-79a730789d23.jpg?v=1690276656"},{"product_id":"we50608035","title":"Widin Carbide Square End Mill For Mold \u0026 Die - 6 Flute High Helix (45°) - 8mm x35mm x 90mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nWidin Carbide Square End Mill for Mold \u0026amp; Die is a high-precision cutting tool designed for demanding mold and die work. This model measures 8 mm in cutting diameter with a 35 mm length of cut and a 90 mm overall length, offering the reach and rigidity needed for clean cavities and tight tolerances. It supports a cutting diameter range of 6.0 mm to 20.0 mm and is built to deliver repeatable, accurate results across different applications.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eTight diameter tolerance for repeatable precision\u003c\/b\u003e: +0\/-0.03 mm ensures consistent hole sizes and contours with every pass, reducing rework and improving part quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e6-flute, high-helix design for smooth cutting\u003c\/b\u003e: 45° helix lowers cutting load and enhances chip evacuation, delivering smoother cuts and better surface finish in mold and die materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eW-coated carbide for durability and stability\u003c\/b\u003e: The coating, combined with wear-resistant carbide, extends tool life and maintains machining stability when working with mold steels below 55 HRc, as well as pre-hardened steel, alloy steel, and carbon steel.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nDesigned to boost reliability and productivity, this end mill helps you achieve consistent results with fewer interruptions. Its rigid carbide construction, precise tolerance, and coating-driven longevity translate to longer tool life, reduced downtime, and more predictable performance across a range of mold and die projects.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Widin","offers":[{"title":"Default Title","offer_id":40257976959054,"sku":"UE50608035","price":51.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/we506_66310cfa-0b6d-40be-9659-e0a05cfef1ef.jpg?v=1690276655"},{"product_id":"we50608040","title":"Widin Carbide Square End Mill For Mold \u0026 Die - 6 Flute High Helix (45°) - 8mm x40mm x 130mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Widin Carbide Square End Mill is a precision cutting tool built for mold and die work. This 8 mm diameter end mill (cutting length 40 mm, overall length 130 mm) is designed to deliver reliable, accurate material removal across demanding milling tasks, making it a versatile choice for engineers, machinists, and hobbyists alike.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e6‑Flute high‑helix design\u003c\/b\u003e: reduces cutting load for smoother cuts and faster chip evacuation, helping you maintain steady feeds and maximize material removal in a single pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTight diameter tolerance +0\/−0.03 mm\u003c\/b\u003e: ensures consistent, repeatable results pass after pass, improving reliability for fits, pockets, and slots in mold and die work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eW‑coated carbide for long life\u003c\/b\u003e: the durable coating enhances wear resistance and machining stability, delivering longer tool life and steady performance when cutting mold\/die steels below 55 HRc, including pre‑hardened, alloy, and carbon steels.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nDesigned to handle the rigorous demands of mold and die machining, this end mill combines precise geometry, robust coatings, and a practical size for deep cavities and complex features. The result is reliable performance, reduced downtime, and consistent finishes that help you hit tight tolerances and deliver high‑quality parts more efficiently.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Widin","offers":[{"title":"Default Title","offer_id":40257976991822,"sku":"UE50608040","price":51.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/we506_a84dabf5-adba-4b30-a6d6-b83611209ff8.jpg?v=1690276656"},{"product_id":"we50608040130","title":"Widin Carbide Square End Mill For Mold \u0026 Die - 6 Flute High Helix (45°) - 8mm x40mm x 130mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Widin Carbide Square End Mill for Mold \u0026amp; Die is a precision cutting tool designed for reliable, high-accuracy pocketing, slots, and finishing in mold and die applications. This model features an 8 mm diameter with a cutting length of 40 mm and an overall length of 130 mm, crafted from carbide for outstanding rigidity and wear resistance. Its 6-flute design and 45° high-helix geometry enable efficient material removal and smoother cutting action, ideal for demanding mold and die work.\n\u003c\/p\u003e \u003cp\u003e\nWith a tight diameter tolerance of +0\/-0.03 mm, this end mill delivers consistent results pass after pass. It is suitable for mold and die machining on materials below 55 HRc, including pre-hardened steel, alloy steel, and carbon steel. The W coating further enhances wear resistance and machining stability, helping the tool stand up to tough, repetitive workloads in production environments.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e6-Flute Design for Lower Cutting Load\u003c\/b\u003e: Reduces cutting forces and improves chip evacuation for cleaner pockets and smoother cuts, boosting productivity and tool life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eW Coating for Extended Tool Life\u003c\/b\u003e: Advanced coating delivers better wear resistance and stable performance in demanding steels, reducing downtime from tool changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePrecise, Repeatable Results with Tight Tolerance\u003c\/b\u003e: Diameter tolerance of +0\/-0.03 mm ensures consistent dimensions across passes, ideal for mold \u0026amp; die work on steels below 55 HRc.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis end mill provides reliable performance across mold and die tasks, from precise pocketing to finishing passes, helping you finish projects on time with predictable results. Its carbide construction, optimized geometry, and durable coating come together to support sustained accuracy, reduced rework, and steady workflow in both professional shops and on-site manufacturing environments.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Widin","offers":[{"title":"Default Title","offer_id":40257977024590,"sku":"UE50608040130","price":60.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/we506_06bf6921-cc9b-458f-bbfa-7b73f109a283.jpg?v=1690276656"},{"product_id":"we506100","title":"Widin Carbide Square End Mill For Mold \u0026 Die - 6 Flute High Helix (45°) - 10mm x25mm x 75mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nWidin Carbide Square End Mill for Mold \u0026amp; Die — 6 Flute High Helix (45°) is a precision cutting tool built for mold and die work. It’s designed to deliver stable, repeatable results across a range of alloys and steels, making it a reliable choice for engineers, shop floor technicians, and hobbyists alike.\n\u003c\/p\u003e \u003cp\u003e\nThe versatile diameter range from 6.0 mm to 20.0 mm, with multiple cutting and overall lengths, lets you adapt to different pocket sizes and fixture constraints without swapping tools, streamlining your workflow.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eWide cutting diameter range\u003c\/b\u003e: Cutting diameters from 6.0 mm to 20.0 mm with varied cutting and overall lengths to cover diverse mold features, reducing tool inventory and setup time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePrecision tolerance and high-helix design\u003c\/b\u003e: Tight diameter tolerance of +0\/−0.03 mm ensures consistent, repeatable pockets; 6-flute, 45° high-helix design improves chip evacuation and delivers smoother finishes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable carbide with W coating\u003c\/b\u003e: Premium carbide core with a W coating for longer tool life and improved machining stability, especially on pre-hardened steels and common mold alloys.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis end mill combines accuracy, durability, and versatility to enhance your mold and die workflows. Expect cleaner pockets, tighter tolerances, and fewer reworks, even when tackling pre-hardened steel and carbon steel below 55 HRc. A reliable, long-lasting choice for consistent results across production runs and prototyping alike.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Widin","offers":[{"title":"Default Title","offer_id":40257977057358,"sku":"UE506100","price":67.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/we506_58e97ea1-ed5c-4f81-8f14-443b07dd4120.jpg?v=1690276656"},{"product_id":"we50610040","title":"Widin Carbide Square End Mill For Mold \u0026 Die - 6 Flute High Helix (45°) - 10mm x40mm x 90mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nWidin Carbide Square End Mill for Mold \u0026amp; Die is a precision cutting tool built for demanding mold and die milling. This 6-flute, high-helix (45°) square end mill is designed to deliver clean, accurate pockets and slots with smooth cutting action.\n\u003c\/p\u003e \u003cp\u003e\nConfigured in a 10 mm cutting diameter with a 40 mm length of cut and a 90 mm overall length (as shown), it belongs to a family that covers 6.0–20.0 mm diameters and multiple lengths to match different jobs. The tool features a tight diameter tolerance of +0\/-0.03 mm, a W coating for extended life, and is optimized for mold and die work on pre-hardened steel, alloy steel, and carbon steel below 55 HRc.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e6-Flute High-Helix Design for Smooth, Efficient Cutting\u003c\/b\u003e: Reduces cutting load, minimizes chatter, and provides fast, reliable chip evacuation for clean cavities and shorter cycle times.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eW-Coated Carbide for Longer Tool Life and Stable Performance\u003c\/b\u003e: The W coating enhances wear resistance and heat tolerance, helping the tool withstand repetitive mold\/die cuts and maintain consistent results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTight Tolerance and Flexible Size Range\u003c\/b\u003e: Diameter tolerance of +0\/-0.03 mm ensures repeatable, precise cuts; available across a range of diameters (6.0–20.0 mm) with multiple lengths to fit your specific mold and die layouts.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nIn practice, this end mill delivers reliable, repeatable performance across demanding mold and die applications. The combination of six flutes, a 45° high-helix geometry, and a durable W-coated carbide core translates to smoother finishes, reduced downtime from tool wear, and dependable results when working with pre-hardened steels, alloy steels, and carbon steels under 55 HRc. This tool is designed to help you hit tight tolerances faster, complete more jobs per shift, and maintain consistent quality across complex mold and die projects.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Widin","offers":[{"title":"Default Title","offer_id":40257977090126,"sku":"UE50610040","price":73.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/we506_d91e293b-fba8-4d43-9085-5266faaf0e02.jpg?v=1690276657"},{"product_id":"we50610030","title":"Widin Carbide Square End Mill For Mold \u0026 Die - 6 Flute High Helix (45°) - 10mm x30mm x 80mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Widin Carbide Square End Mill is a precision cutting tool designed for mold and die machining. Its six-flute, high-helix geometry (45°) provides efficient material removal, smooth cutting, and clean pocket finishes. This model supports a cutting diameter range from 6.0 mm to 20.0 mm and is available in multiple cutting and overall lengths to fit different depths and pockets.\n\u003c\/p\u003e \u003cp\u003e\nIn the specific size shown, the tool features a 10 mm cutting diameter with a 30 mm flute length and an 80 mm overall length. The tight diameter tolerance of +0\/-0.03 mm ensures repeatable, accurate cuts, while the W coating enhances wear resistance and machining stability for demanding mold and die work, especially with materials below 55 HRc, including pre-hardened steel, alloy steel, and carbon steel.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eSix-Flute High-Helix for Smoother Cutting\u003c\/b\u003e: The 6-flute geometry reduces cutting load and improves chip evacuation, delivering smoother cuts and longer tool life in mold and die applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTight Diameter Tolerance (+0\/-0.03 mm)\u003c\/b\u003e: Ensures repeatable, accurate pocketing and finishing across passes for consistent results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eW-Coated Carbide for Durability\u003c\/b\u003e: Advanced coating and carbide construction extend tool life and stabilize machining when working with mold steel and pre-hardened materials (below 55 HRc).\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nDesigned to help you finish mold cavities and die features with confidence, this end mill supports faster cycle times, fewer reworks, and reliable results across a range of steels. Its combination of durable carbide, coating, and precise geometry makes it suitable for demanding applications while remaining straightforward to set up in your existing tooling. Whether you're roughing pockets or finishing tight cavities, this tool helps you achieve consistent performance from job to job.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Widin","offers":[{"title":"Default Title","offer_id":40257977122894,"sku":"UE50610030","price":70.23,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/we506_db43d161-7352-498a-86c4-46abdeb90a0f.jpg?v=1690276657"},{"product_id":"we50610050","title":"Widin Carbide Square End Mill For Mold \u0026 Die - 6 Flute High Helix (45°) - 10mm x50mm x 100mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Widin Carbide Square End Mill for Mold \u0026amp; Die is a precision cutting tool built for demanding mold and die work. Designed with a 6-flute, high-helix geometry, it delivers clean pockets, sharp corners, and consistent finishes across a range of mold and die applications. This model features a cutting diameter range from 6.0 mm to 20.0 mm, with various cutting and overall lengths available, making it a versatile choice for different milling needs.\n\u003c\/p\u003e\n\u003cp\u003e\nThe 10 mm diameter version shown in this line-up combines rigidity and reach with practical sizing: cutting length of 50 mm and an overall length of 100 mm, paired with a tight diameter tolerance of +0\/−0.03 mm. The W coating further boosts performance, delivering longer tool life and steadier machining in tough materials commonly encountered in mold and die work.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e6-Flute High-Helix Design for Efficient Cutting\u003c\/b\u003e: The six flutes and 45° high-helix geometry reduce cutting forces, improve chip evacuation, and enable smoother, faster material removal in mold and die profiles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePrecise Tolerance for Repeatable Accuracy\u003c\/b\u003e: A tight diameter tolerance of +0\/−0.03 mm ensures consistent pocket and feature dimensions across passes, minimizing rework and delivering reliable parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eW-Coated Carbide for Durability and Stability\u003c\/b\u003e: The W coating extends tool life and enhances machining stability, making it well-suited for mold and die work below 55 HRc and for pre-hardened steel, alloy steel, and carbon steel.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nUsing this end mill helps you maintain tight tolerances, reduce downtime from tool wear, and achieve repeatable, high-quality finishes. Its robust carbide construction, combined with a long cutting length and sensible overall length, provides dependable performance for deep pockets and precise features in harsh machining environments, making it a reliable choice for engineers, machinists, and shop floors focused on mold and die productivity.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Widin","offers":[{"title":"Default Title","offer_id":40257977155662,"sku":"UE50610050","price":70.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/we506_3f08ead9-4336-472a-96d6-c71c89de049e.jpg?v=1690276658"},{"product_id":"we50610050150","title":"Widin Carbide Square End Mill For Mold \u0026 Die - 6 Flute High Helix (45°) - 10mm x50mm x 150mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nWidin Carbide Square End Mill for Mold \u0026amp; Die is built for precision and durability in demanding mold and die machining. Designed with a 6-flute, high-helix geometry (45°), it delivers efficient material removal and smooth cuts across tough tooling steels. This versatile end mill is engineered to handle a range of cutting needs and is ideal for shop floors and engineering teams seeking reliable, repeatable performance in mold work.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e6‑Flute High‑Helix Geometry (45°)\u003c\/b\u003e: Reduces cutting load and enhances chip evacuation for smoother cutting and cleaner finishes on mold and die materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTight Diameter Tolerance +0\/‑0.03 mm\u003c\/b\u003e: Delivers consistent, high-precision cuts and repeatable results, reducing rework and improving cavity accuracy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eW Coating for Extended Tool Life\u003c\/b\u003e: Improves wear resistance and machining stability, helping the tool last longer in demanding mold, die, and steel applications.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis end mill is crafted from premium carbide for outstanding wear resistance and dependable performance in pre-hardened steel, alloy steel, and carbon steel. It supports a cutting diameter range of 6.0 mm to 20.0 mm and is available in multiple cutting and overall lengths to fit diverse setups. The listing includes a 10 mm diameter with a 50 mm flute length and a 150 mm overall length, making it a versatile choice for mold and die projects that require both precision and robust machining capability.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Widin","offers":[{"title":"Default Title","offer_id":40257977188430,"sku":"UE50610050150","price":84.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/we506_14c280ed-9151-4ccc-a84c-51c07ee12e4d.jpg?v=1690276658"},{"product_id":"we506120","title":"Widin Carbide Square End Mill For Mold \u0026 Die - 6 Flute High Helix (45°) - 12mm x30mm x 80mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nWidin Carbide Square End Mill for Mold \u0026amp; Die is a precision cutting tool tailored for mold and die work. Designed for reliability and accuracy, it features a 12 mm shank, 30 mm flute length, and 80 mm overall length, with a 6-flute high-helix geometry (45°) to balance aggressive material removal with smooth finishing.\n\u003c\/p\u003e\n\u003cp\u003e\nCutting diameters range from 6.0 mm to 20.0 mm, and it maintains a tight diameter tolerance of +0\/-0.03 mm to ensure consistent results across passes and setups. The W coating enhances wear resistance and machining stability, helping to extend tool life in demanding production environments. This end mill is well-suited for mold and die machining below 55 HRc, and it performs effectively on pre-hardened steel, alloy steel, and carbon steel.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClose cutting-diameter tolerance and versatile range\u003c\/b\u003e: Delivers precise, repeatable cuts across diameters from 6.0 to 20.0 mm with a tight tolerance of +0\/-0.03 mm for consistent results in multiple passes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSix-flute high-helix geometry\u003c\/b\u003e: Reduces cutting load and improves chip evacuation, enabling smoother cuts and better surface finishes on mold and die work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eW-coated carbide for wear resistance\u003c\/b\u003e: Extends tool life and stabilizes machining when working with mold\/die materials, including pre-hardened steel, alloy steel, and carbon steel up to 55 HRc.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis tool combines robust carbide (with a durable W coating) and a practical 12 mm shank, 30 mm flute length, and 80 mm overall length to deliver reliable, efficient performance on deep pockets, slots, and complex mold features. Users can expect consistent dimensions, reduced downtime from fewer tool changes, and steady performance across a range of standard mold and die materials, helping optimize throughput and finish quality in everyday manufacturing workflows.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Widin","offers":[{"title":"Default Title","offer_id":40257977221198,"sku":"UE506120","price":98.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/we506_069a2711-fd17-46d7-858d-2f465b8aad23.jpg?v=1690276659"},{"product_id":"we50612040","title":"Widin Carbide Square End Mill For Mold \u0026 Die - 6 Flute High Helix (45°) - 12mm x40mm x 90mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nWidin Carbide Square End Mill for Mold \u0026amp; Die is a precision carbide cutter designed to deliver reliable performance in mold and die work. Its 6-flute high-helix geometry (45°) promotes smooth cutting and efficient chip evacuation, helping you achieve clean pockets, slots, and contours with fewer passes.\n\u003c\/p\u003e \u003cp\u003e\nThis specific model features a 12 mm cutting diameter with a 40 mm flute length and a 90 mm overall length, part of a family that includes diameters from 6.0 mm to 20.0 mm and a variety of cutting and overall lengths to fit different machines and setups. It offers a tight diameter tolerance of +0\/-0.03 mm, ensuring consistent results across production runs. The tool is coated with W for enhanced wear resistance and stability in demanding mold- and die-machining applications, including materials below 55 HRc such as pre-hardened steel, alloy steel, and carbon steel.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e6-Flute High-Helix (45°) for Smooth Cutting\u003c\/b\u003e: Reduces cutting load for easier feeding, delivers smoother cuts, and improves chip evacuation to keep the cut clear and consistent.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePrecise Diameter Tolerance +0\/-0.03mm\u003c\/b\u003e: Ensures accurate, repeatable results on tight-feature pockets and precise contours—improving part quality and reducing rework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eW Coating for Extended Life and Stability\u003c\/b\u003e: enhances wear resistance and machining stability, delivering longer tool life on mold- and die-grade steels below 55 HRc, including pre-hardened, alloy, and carbon steels.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis end mill is built to boost reliability and efficiency in mold and die machining, helping you complete intricate features with consistent quality while minimizing tool changes and downtime.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Widin","offers":[{"title":"Default Title","offer_id":40257977253966,"sku":"UE50612040","price":102.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/we506_8f21e530-9ca4-4e85-badc-da372630b365.jpg?v=1690276659"},{"product_id":"we50612050","title":"Widin Carbide Square End Mill For Mold \u0026 Die - 6 Flute High Helix (45°) - 12mm x50mm x 100mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nWidin Carbide Square End Mill for Mold \u0026amp; Die is a precision cutting tool designed for engineers, machinists, and hobbyists who demand consistent, high-quality results in mold and die work. Built around a 12 mm diameter, 50 mm cutting length, and 100 mm overall length, this 6-flute end mill features a 45-degree high-helix geometry to deliver smooth material removal and clean finishes. With a tight diameter tolerance of +0\/-0.03 mm and a durable W-coated carbide body, it’s engineered to resist wear and maintain accuracy across demanding machining cycles, especially in mold and die applications below 55 HRc and in pre-hardened steel, alloy steel, and carbon steel.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eTight diameter tolerance\u003c\/b\u003e: Cutting diameter held to +0\/-0.03 mm ensures precise, repeatable cuts and accurate cavity replication for consistent part quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e6-flute high-helix design\u003c\/b\u003e: Reduces cutting load while improving chip evacuation, delivering smoother cuts and better surface finish on complex mold features.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eW-coated carbide construction\u003c\/b\u003e: Maximizes tool life and machining stability, delivering reliable performance in demanding mold\/die materials and reducing downtime.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis end mill is built to streamline mold and die workflows: deliver accurate dimensions, maintain predictable results across multiple passes, and extend tool life in common die steels and alloys. Whether you’re detailing intricate cavities, finishing side walls, or deburring molds, the Widin 12×50×100 mm end mill offers dependable performance that supports faster setups, fewer reworks, and improved overall productivity.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Widin","offers":[{"title":"Default Title","offer_id":40257977286734,"sku":"UE50612050","price":106.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/we506_86a9f16d-c217-481b-bb29-738bdbc04a5b.jpg?v=1690276660"},{"product_id":"we50612060","title":"Widin Carbide Square End Mill For Mold \u0026 Die - 6 Flute High Helix (45°) - 12mm x60mm x 110mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Widin Carbide Square End Mill for Mold \u0026amp; Die is built to handle demanding mold and die work with precision and reliability. This model features a 12 mm cutting diameter, 60 mm flute length, and 110 mm overall length, delivering rigid performance on CNC machines and manual setups. Designed for applications that require accurate pockets, slots, and contours, it maintains tight tolerances and smooth finishes across a range of materials.\n\u003c\/p\u003e\n\u003cp\u003e\nWith a 6-flute, high-helix geometry (45°), it cuts efficiently, reduces cutting load, and promotes fast, clean chip evacuation. The tool’s carbide composition, plus the W coating, delivers extended life and stable cuts in mold and die work, including alloys and carbon steels, as well as pre-hardened steels up to 55 HRc.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDiameter tolerance +0\/ -0.03 mm\u003c\/b\u003e: ensures repeatable, precise cutting results across multiple passes, reducing rework and scrap.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e6-flute high-helix design (45°)\u003c\/b\u003e: lowers cutting forces, improves chip evacuation, and delivers smoother surfaces for mold cavities and die pockets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eW-coated carbide construction\u003c\/b\u003e: enhances heat resistance and stability, delivering longer tool life and reliable performance in mold and die materials below 55 HRc, including pre-hardened steel, alloy steel, and carbon steel.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis combination of precision, durability, and efficient cutting translates into faster machining cycles, fewer tool changes, and consistently accurate features. The Widin End Mill helps you maintain tight tolerances on critical mold features, improves surface finish, and reduces downtime—making it a dependable choice for professional shops and serious hobbyists alike.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Widin","offers":[{"title":"Default Title","offer_id":40257977319502,"sku":"UE50612060","price":110.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/we506_fd456cad-a13f-408c-aec4-7687d1c5628a.jpg?v=1690276661"},{"product_id":"we50612060150","title":"Widin Carbide Square End Mill For Mold \u0026 Die - 6 Flute High Helix (45°) - 12mm x60mm x 150mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nWidin Carbide Square End Mill for Mold \u0026amp; Die is a precision cutting tool built for demanding mold and die work. Its 6-flute, high-helix geometry delivers smooth cutting and reliable chip evacuation, helping you achieve clean pockets and accurate contours in challenging steels.\n\u003c\/p\u003e \u003cp\u003e\nThis model features a 12 mm cutting diameter with a 60 mm flute length and a 150 mm overall length, and is available in a range of cutting diameters (6–20 mm) to fit different pocket geometries and applications. It includes a tight diameter tolerance of +0\/−0.03 mm to ensure consistent, repeatable results across passes.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eTight diameter tolerance\u003c\/b\u003e: Ensures precise, repeatable cuts with a +0\/−0.03 mm tolerance, reducing rework and enabling close-pocket machining in molds and dies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e6-flute, high-helix geometry\u003c\/b\u003e: Reduces cutting load for smoother cutting, faster material removal, and improved chip evacuation, supporting clean finishes in demanding materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eW-coated carbide for long life\u003c\/b\u003e: The wear-resistant coating boosts tool life and machining stability, making it well-suited for mold and die work in materials under 55 HRc, including pre-hardened steel, alloy steel, and carbon steel.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nWith the combination of precise dimensions, robust six-flute design, and durable W-coated carbide, this end mill helps you complete mold and die projects more efficiently. It supports reliable performance across passes, reduces downtime from tool changes, and delivers consistent results on pockets, contours, and profiles in common mold steels.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Widin","offers":[{"title":"Default Title","offer_id":40257977352270,"sku":"UE50612060150","price":128.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/we506_ce343bbc-ab3c-492d-8d16-01141ba283d6.jpg?v=1690276661"},{"product_id":"we506160","title":"Widin Carbide Square End Mill For Mold \u0026 Die - 6 Flute High Helix (45°) - 16mm x40mm x 100mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nWidin Carbide Square End Mill for Mold \u0026amp; Die with 6-flute high-helix geometry (45°) is engineered for precise, efficient mold and die machining. This model features a 16 mm cutting diameter, 40 mm cutting length, and 100 mm overall length, making it ideal for cavities, pockets, and features that demand clean, repeatable results. With a cutting diameter range from 6.0 mm to 20.0 mm and a tight diameter tolerance of +0\/-0.03 mm, you can expect consistent performance across jobs and setups.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e6‑Flute, High‑Helix Geometry\u003c\/b\u003e: Delivers smoother cutting and faster material removal with excellent chip evacuation, helping maintain a stable process and a cleaner finish on mold and die work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eW Coating for Longevity and Stability\u003c\/b\u003e: Reduces friction and wear, extending tool life and maintaining cutting stability during demanding steel machining.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTight Tolerance +0\/−0.03 mm with Robust Carbide Core\u003c\/b\u003e: Ensures precise, repeatable pockets and features, minimizing rework and delivering reliable, consistent results part after part.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nDesigned for versatility in mold and die applications, this end mill handles pre-hardened steel, alloy steel, and carbon steel up to 55 HRc. The combination of carbide hardness, coating protection, and precise geometry gives you dependable performance, longer tool life, and confidence to push your machining envelopes while keeping workflow steady and parts within spec.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Widin","offers":[{"title":"Default Title","offer_id":40257977385038,"sku":"UE506160","price":331.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/we506_3124d3ba-0e2e-4a05-8863-8a4c7edb1325.jpg?v=1690276662"},{"product_id":"we506160110","title":"Widin Carbide Square End Mill For Mold \u0026 Die - 6 Flute High Helix (45°) - 16mm x110mm x 200mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Widin Carbide Square End Mill is a precision cutting tool designed specifically for mold and die work. With a robust 16mm cutting diameter, a cutting length of 110mm, and a 200mm overall length, this end mill delivers reliable performance in demanding machining environments. Built for engineers, machinists, and hobbyists alike, it pairs precision with durability to handle tight pockets, slots, and cavities with confidence.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e6‑Flute High‑Helix Geometry (45°)\u003c\/b\u003e: This design reduces cutting load and vibrations, enabling smoother cuts, faster chip evacuation, and cleaner finishes on mold and die components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTight Diameter Tolerance +0\/‑0.03mm\u003c\/b\u003e: Ensures consistent cutting results and repeatable accuracy across runs, which is critical for tight fits and precise cavity work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eW Coated Carbide for Durability\u003c\/b\u003e: The coating enhances heat resistance and wear life, delivering longer tool life and stable performance in pre‑hardened steel, alloy steel, and carbon steel.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nIn real-world use, this end mill helps you complete molds and dies with repeatable precision while minimizing downtime from tool wear. The combination of carbide hardness, coating protection, and optimized geometry supports reliable performance across a range of common mold steels, delivering consistent results, fewer passes, and smoother surface finishes—so you can trust it to meet demanding production schedules.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Widin","offers":[{"title":"Default Title","offer_id":40257977417806,"sku":"UE506160110","price":473.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/we506_f9a1a92a-94b1-4157-8fc2-4047b9c762f9.jpg?v=1690276663"},{"product_id":"we50616050","title":"Widin Carbide Square End Mill For Mold \u0026 Die - 6 Flute High Helix (45°) - 16mm x50mm x 110mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Widin Carbide Square End Mill is a precision cutting tool designed for demanding mold and die machining. With a 16 mm cutting diameter, 50 mm length of cut, and 110 mm overall length, it’s sized to handle pockets, slots, and profiles with consistent accuracy. The 6‑flute, high‑helix geometry (45°) reduces cutting forces, promotes smooth cutting, and improves chip evacuation for reliable, efficient performance.\n\u003c\/p\u003e\n\u003cp\u003e\nCoated with W, this carbide end mill delivers extended tool life and stable machining in tough materials. Its tight diameter tolerance of +0\/−0.03 mm ensures repeatable results across production runs, making it well suited for mold and die work in materials up to 55 HRc, including pre‑hardened steel, alloy steel, and carbon steel.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e6-Flute High-Helix Geometry for Reduced Cutting Load\u003c\/b\u003e: Lowers cutting forces, enables smoother cuts, and enhances chip evacuation for faster, cleaner machining.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eW Coating for Longer Tool Life and Stability\u003c\/b\u003e: Improves wear resistance and machining stability in demanding mold and die applications, extending usable tool life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTight Tolerance and Material Compatibility\u003c\/b\u003e: +0\/−0.03 mm diameter tolerance delivers repeatable pocketing and accuracy across common mold steels, including pre‑hardened, alloy, and carbon steel up to 55 HRc.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis end mill helps you streamline workflows by delivering reliable, repeatable results from roughing through finishing. The combination of robust carbide, wear‑resistant coating, and precise sizing supports fewer passes, consistent surface finishes, and reduced rework—giving you confidence in every cut and a smoother path from setup to production.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Widin","offers":[{"title":"Default Title","offer_id":40257977450574,"sku":"UE50616050","price":345.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/we506_d0890fdb-010f-431d-af23-dd8c1a386ded.jpg?v=1690276663"},{"product_id":"we50616060","title":"Widin Carbide Square End Mill For Mold \u0026 Die - 6 Flute High Helix (45°) - 16mm x60mm x 120mm","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Widin Carbide Square End Mill for Mold \u0026amp; Die is a high-performance cutting tool designed for precision work in mold and die applications. Featuring a 6-flute, high-helix geometry (45°) and a robust carbide construction, it delivers smooth cutting, efficient chip evacuation, and consistent results across a range of common mold steels and alloys. It is available in a cutting diameter range of 6.0 mm to 20.0 mm with multiple cutting and overall lengths to suit different setups.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e6-Flute High-Helix (45°) Geometry\u003c\/b\u003e: Reduces cutting forces and heat buildup while delivering smooth, efficient cuts and improved chip evacuation for faster, cleaner milling in mold cavities.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePrecise Diameter Tolerance\u003c\/b\u003e: Maintains tight control with a tolerance of +0\/-0.03 mm, ensuring accurate features and repeatable performance across jobs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eW-Coated Carbide for Durability\u003c\/b\u003e: Extends tool life and stabilizes machining, especially effective for mold and die steels below 55 HRc and for pre-hardened, alloy, and carbon steels.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nDesigned to be reliable and practical, this end mill supports demanding mold and die work while remaining intuitive to use. Its wear-resistant carbide core and protective W coating help you maintain consistent results, reduce tool changes, and keep your machining workflow efficient. Whether you're setting up a new process or upgrading existing tooling, this end mill is a dependable choice for durable performance and precise, repeatable cuts.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Widin","offers":[{"title":"Default Title","offer_id":40257977483342,"sku":"UE50616060","price":358.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/we506_20344ae4-76ad-41e7-83ab-7e81b0c1c752.jpg?v=1690276664"}],"url":"https:\/\/www.protool-ltd.co.uk\/collections\/6-flute-end-mills.oembed","provider":"Protool Precision Tools","version":"1.0","type":"link"}