{"title":"Carbide Burrs for Aluminium \u0026 Non-Ferrous","description":"\u003cp\u003eAluminium cut carbide burrs, made for soft and gummy materials. Aluminium, brass, copper, bronze and most plastics pack the flutes of a standard single or double cut burr within seconds, and once the gullets load the tool stops cutting and starts rubbing — producing heat, smearing and a poor surface instead of swarf. Aluminium cut has fewer, deeper flutes with much wider spacing so the chip throws clear on its own.\u003c\/p\u003e\n\u003cp\u003eStocked in Type A (cylinder without end cut), Type B (cylinder with end cut), Type C (ball nose cylinder), Type D (ball nose), Type F (ball nose tree) and Type L (ball nose cone), from 6mm to 16mm head diameter on a 6mm shank.\u003c\/p\u003e\n\u003cp\u003eIf you need a shape we do not stock in aluminium cut — oval, pointed tree, flame, countersink, cone or inverted cone — single cut is the closer substitute, because its wider tooth spacing clogs less readily than double cut.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/vortex.png?v=1657700949\"\u003e\u003c\/p\u003e","products":[{"product_id":"pro1500781","title":"Vortex Carbide Burr Type A - Cylinder Without End Cut - Aluminium Cut - 6mm Diameter","description":"\u003cdiv\u003e\n\u003cp\u003eThe Vortex Carbide Burr Type A is a 6 mm diameter cylinder burr designed for rapid material removal on aluminum and other non‑ferrous metals. Its end-cut‑free cylinder geometry makes it ideal for shaping and smoothing flat surfaces, deburring edges, and finishing workpieces at high speeds. Built for engineers, machinists, and hobbyists, this burr delivers consistent, clean results in busy workshop environments.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClog-resistant cutting geometry\u003c\/b\u003e: Prevents aluminum from binding in the flutes, enabling smooth, continuous cutting at high speeds and reducing downtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable carbide construction\u003c\/b\u003e: Delivers long tool life and enduring sharpness, standing up to frequent deburring and finishing tasks without loss of performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCylinder profile for flat-surface finishing\u003c\/b\u003e: End-cut-free design lets you work flush along large flat areas and edges, producing uniform profiles with minimal passes.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eWith fast material removal, clog‑free performance, and rugged carbide durability, this burr speeds up deburring, shaping, and finishing on aluminum and other non‑ferrous metals. Expect smoother surfaces, fewer passes, and repeatable results across parts, boosting productivity and confidence in every job.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":41831455981646,"sku":"PRO1500781","price":7.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/A3_1c5fbb62-ad11-4210-9990-d4e916c06ea9.png?v=1789549127"},{"product_id":"pro1500782","title":"Vortex Carbide Burr Type A - Cylinder Without End Cut - Aluminium Cut - 10mm Diameter","description":"\u003cdiv\u003e\n\u003cp\u003e\nVortex Carbide Burr Type A, 10 mm diameter, is a precision cylinder burr designed for rapid material removal on aluminum and other non-ferrous metals. Its end-cutless cylinder shape excels at shaping and smoothing flat surfaces, making deburring and finishing faster and more consistent.\n\u003c\/p\u003e\n\u003cp\u003e\nEngineers, machinists, and hobbyists will appreciate the durable carbide construction and its ability to perform at high speeds. The specialized cutting geometry helps prevent clogging, delivering smooth, continuous cutting and reliable results across demanding aluminum tasks.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEnd-cutless cylinder geometry for flat surfaces\u003c\/b\u003e: Concentrates material removal along flat areas, delivering smooth deburring and precise finishing on large faces without creating end-cut grooves.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable carbide for long tool life\u003c\/b\u003e: Hard-wearing carbide stands up to high-speed deburring and shaping in aluminum, providing consistent performance and reducing the need for frequent tool changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClog-resistant cutting geometry for aluminum\u003c\/b\u003e: Specialized geometry prevents chips from clogging the cut, ensuring continuous, chatter-free operation at high speeds and cleaner edges.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis burr helps you finish aluminum and other non-ferrous parts faster with cleaner edges, fewer passes, and fewer interruptions due to clogging. The combination of a robust carbide tip and geometry tailored for flat-surface finishing translates to improved workflow, reliable results, and enhanced overall performance across deburring, shaping, and finishing tasks.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":41831456014414,"sku":"PRO1500782","price":16.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/A3_808f9bfd-6bd9-4317-9d3a-8e64455ffe02.png?v=1789549130"},{"product_id":"pro1500783","title":"Vortex Carbide Burr Type A - Cylinder Without End Cut - Aluminium Cut - 12mm Diameter","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Vortex Carbide Burr Type A is a cylinder‑shaped cutting tool designed for fast, efficient material removal on aluminum and other non‑ferrous metals. With its specialized cutting geometry, it stays cool and clog‑free at high speeds, helping you finish jobs quicker with consistent results.\n\u003c\/p\u003e \u003cp\u003e\nThis burr features a 12 mm diameter and a cylinder profile without an end cut, making it ideal for shaping and smoothing flat surfaces as well as deburring edges. Crafted from durable carbide, it delivers long tool life and reliable performance in demanding workshop conditions.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClog‑resistant geometry for fast aluminum removal\u003c\/b\u003e: Keeps cutting smoothly at high speeds, reducing downtime from resin\/chip buildup and enabling continuous, efficient material removal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable carbide for long tool life\u003c\/b\u003e: Hardwearing construction maintains sharpness and consistent results across many jobs, lowering replacement costs and downtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCylinder shape without end cut for flat‑surface finishing\u003c\/b\u003e: Focuses material removal on flat faces, delivering even deburring, edging, and finishing without creating gouges or dips.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nDesigned for engineers, machinists, and hobbyists alike, this burr helps you speed up workflows, improve surface quality, and achieve repeatable finishes on aluminum and other non‑ferrous parts. Its combination of rapid material removal, longevity, and precise flat‑surface shaping makes it a dependable choice for deburring, shaping, and final finishing tasks in both production and shop environments.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":41831456145486,"sku":"PRO1500783","price":29.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/A3_99a5c9c6-2adc-4c31-8e4d-d82614cf7f67.png?v=1789549133"},{"product_id":"pro1500784","title":"Vortex Carbide Burr Type A - Cylinder Without End Cut - Aluminium Cut - 16mm Diameter","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Vortex Carbide Burr Type A (16 mm diameter) is a cylinder-shaped cutting tool designed for rapid, efficient material removal on softer metals like aluminum. With a cylinder profile and no end-cut, it’s ideal for shaping and smoothing flat surfaces, deburring edges, and finishing non-ferrous parts. This makes it a trusted choice for engineers, machinists, and hobbyists working on aluminum and other non-ferrous metals.\n\u003c\/p\u003e \u003cp\u003eCrafted from solid carbide for long-lasting performance, it maintains sharpness through high-speed work and heavy workloads, delivering consistent results project after project.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClog-resistant aluminum cutting\u003c\/b\u003e: Its specialized cutting geometry prevents clogging and enables smooth, continuous material removal at high speeds, reducing downtime and boosting productivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable carbide construction\u003c\/b\u003e: Built to last, this burr retains sharpness through repeated use, offering reliable performance in demanding deburring, shaping, and finishing tasks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCylinder profile without end cut for flat-surface shaping\u003c\/b\u003e: The end-cut-free cylinder allows precise shaping and smoothing of flat surfaces, providing consistent finishes on aluminum parts.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nUsing this burr helps you finish aluminum and other non-ferrous components faster, with cleaner edges and smoother surfaces. Its combination of clog-resistant cutting, durable carbide life, and a practical cylinder shape translates to fewer tool changes, less rework, and a more efficient workflow from rough stock to finished part.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":41831456178254,"sku":"PRO1500784","price":48.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/A3_1c5ea70c-ca9b-4f0d-a7f7-f0e19e56d0ab.png?v=1789549135"},{"product_id":"pro1500798","title":"Vortex Carbide Burr Type B - Cylinder With End Cut - Aluminium Cut - 6mm Diameter","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Vortex Carbide Burr Type B—Cylinder With End Cut—Aluminium Cut (6 mm diameter) is a carbide burr engineered for high-efficiency material removal in aluminium and other non-ferrous metals. Its Type B cylinder with an end cut provides versatile access to flat surfaces and edges, even in tight or hard-to-reach areas, while its specialized flute geometry prevents clogging and supports rapid, smooth cutting.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClog-resistant cutting for aluminium\u003c\/b\u003e: Specialized flute geometry prevents clogging, enabling rapid material removal while keeping operation smooth.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVersatile geometry for flat surfaces and edges\u003c\/b\u003e: Cylinder-with-end-cut design lets you reach edges and tight spots without swapping tools, reducing downtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable carbide for long tool life\u003c\/b\u003e: Built to withstand repeated use on aluminium and other non-ferrous metals, delivering reliable performance and lasting longevity.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nWhether you’re an engineer, fabricator, hobbyist, or maintenance professional, this burr helps you finish jobs faster with cleaner edges and smoother surfaces. The 6 mm diameter, combined with clog-resistant cutting and versatile reach, reduces downtime and tool changes while delivering consistent results across aluminium and other non-ferrous metals.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":41831457685582,"sku":"PRO1500798","price":8.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/B3_61ff571b-66e8-4289-98ca-d934c7f28f0c.png?v=1789549178"},{"product_id":"pro1500799","title":"Vortex Carbide Burr Type B - Cylinder With End Cut - Aluminium Cut - 10mm Diameter","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Vortex Carbide Burr Type B is a high‑efficiency cutting tool designed specifically for softer metals like aluminum. Its cylinder with end‑cut geometry lets you tackle both flat surfaces and edges, making it a versatile choice for engineers, machinists, and DIY enthusiasts working in tight or hard‑to‑reach areas. With a 10 mm diameter, it delivers precise control while removing material quickly and smoothly.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClog-resistant flute geometry\u003c\/b\u003e: Optimized to prevent aluminum from clogging the flutes, enabling faster material removal and a consistently smooth cut with less downtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eType B cylinder with end-cut versatility\u003c\/b\u003e: Works effectively on flat surfaces and edges alike, giving you dependable performance in hard‑to‑reach corners without changing tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable carbide construction\u003c\/b\u003e: Built to last with excellent wear resistance, providing reliable deburring, shaping, and finishing on aluminum and other non‑ferrous metals.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis burr supports streamlined workflows by delivering repeatable results, reducing manual finishing time, and standing up to demanding use in both professional and hobbyist settings. Its combination of thoughtful geometry and robust materials helps you achieve clean edges, smooth finishes, and professional‑quality results with greater confidence and efficiency.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":41831457751118,"sku":"PRO1500799","price":19.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/B3_36dab814-e404-4577-977d-34a3c7ae0f5b.png?v=1789549181"},{"product_id":"pro1500800","title":"Vortex Carbide Burr Type B - Cylinder With End Cut - Aluminium Cut - 12mm Diameter","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Vortex Carbide Burr Type B – Cylinder With End Cut for Aluminium, 12mm diameter, is a high-precision cutting tool designed for quick, clean work on soft metals like aluminum. Its cylinder body with an end-cut profile delivers fast material removal and smooth operation, making it ideal for engineers, tradespeople, hobbyists, and shop floors working on flat surfaces or edges, even in tight spaces.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClog-resistant flute geometry\u003c\/b\u003e: Special flute design prevents aluminum from clogging the cutting edges, enabling faster material removal and a consistently smooth cut.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEnd-cut cylinder for edges and tight spaces\u003c\/b\u003e: Type B tool geometry handles both flat surfaces and edge work, providing access to narrow gaps and tricky corners with ease.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable carbide construction\u003c\/b\u003e: Hardened carbide delivers long tool life and dependable performance when deburring, shaping, and finishing aluminum and other non-ferrous metals.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis burr helps you finish projects faster with fewer tool changes and less downtime, while delivering reliable, repeatable results. Its combination of clog-resistant cutting, versatile geometry, and robust carbide makes it a dependable choice for consistent deburring, shaping, and finishing of aluminum parts across professional and hobbyist workflows.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":41831457914958,"sku":"PRO1500800","price":30.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/B3_bb870715-ff41-4312-8cb3-dedab329559d.png?v=1789549183"},{"product_id":"pro1500801","title":"Vortex Carbide Burr Type B - Cylinder With End Cut - Aluminium Cut - 16mm Diameter","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Vortex Carbide Burr Type B - Cylinder With End Cut - Aluminium Cut is a 16 mm diameter carbide burr optimized for high-efficiency cutting on softer metals like aluminum. Its flute geometry is engineered to reduce clogging, enabling rapid material removal while keeping the cut smooth and controlled.\n\u003c\/p\u003e\n\u003cp\u003e\nThe Type B cylinder with an end cut adds versatility, letting you work on flat surfaces and along edges, even in tight or hard-to-reach areas. Built from durable carbide, this burr delivers reliable deburring, shaping, and finishing for aluminum and other non-ferrous metals, supporting consistent performance and long tool life.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClog-resistant flute geometry\u003c\/b\u003e: Enables fast material removal on aluminum while maintaining a smooth, steady cut, reducing downtime from built-up chips.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVersatile cylinder with end-cut\u003c\/b\u003e: Perfect for both flat surfaces and edges, including confined spaces and tricky contours, with clean, precise results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable carbide construction\u003c\/b\u003e: Delivers long tool life and consistent performance across multiple passes, ensuring reliable deburring and finishing.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis burr helps you complete aluminum and non-ferrous metal work efficiently, with fewer passes and a cleaner finish. Its combination of clog-resistant cutting, adaptable geometry, and tough materials supports faster setup-to-finish workflows, better edge refinement, and dependable, repeatable results across a range of applications.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":41831457947726,"sku":"PRO1500801","price":50.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/B3_c39ad901-48c6-49e8-b26c-93c97b720630.png?v=1789549186"},{"product_id":"pro1500812","title":"Vortex Carbide Burr Type C - Ball Nose Cylinder - Aluminium Cut - 6mm Diameter","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Vortex Carbide Burr Type C – Ball Nose Cylinder – Aluminium Cut is a high-performance rotary burr designed for rapid material removal in aluminum and other non-ferrous metals. With a ball nose tip and a 6 mm cutting diameter, it delivers precise shaping on curved surfaces and contours, making it ideal for engineers, machinists, and DIY builders who need clean, accurate results.\n\u003c\/p\u003e \u003cp\u003e\nEquipped with a specialized flute geometry, this burr minimizes clogging and maintains smooth, continuous cutting even at high spindle speeds. The durable carbide construction stands up to demanding deburring, shaping, and finishing tasks, providing reliable performance across multiple jobs in workshop and production environments.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBall nose tip for precise contouring\u003c\/b\u003e: Enables accurate work on curved surfaces and complex geometries, delivering consistent detail without gouging or flat spots.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClog-resistant flute design\u003c\/b\u003e: Reduces chip buildup in aluminum, allowing faster cuts with less downtime and smoother, uninterrupted material removal at high speeds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable carbide construction\u003c\/b\u003e: Delivers long tool life, sharp edges, and repeatable results for deburring, shaping, and finishing non-ferrous metals.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nUsed across a range of applications—from rapid shaping of aluminum enclosures to precise deburring on curved automotive or aerospace components—this burr helps you finish the job faster with cleaner edges and a professional finish. Its robust build and specialized geometry give you confidence in consistent performance, whether you’re engineering prototypes or running high-volume production work.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":41831459487822,"sku":"PRO1500812","price":7.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/C3_88e47234-303d-4d24-a78b-433ba93381cb.png?v=1789549219"},{"product_id":"pro1500813","title":"Vortex Carbide Burr Type C - Ball Nose Cylinder - Aluminium Cut - 10mm Diameter","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Vortex Carbide Burr Type C - Ball Nose Cylinder - Aluminium Cut is designed for rapid material removal on softer metals like aluminum. Its specialized flute geometry prevents clogging, ensuring smooth, continuous cutting at high speeds.\n\u003c\/p\u003e \u003cp\u003e\nThe ball nose tip enables precise work on curved surfaces and contours, making it ideal for intricate shaping. Built from durable carbide, this burr delivers reliable deburring, shaping, and finishing for aluminum and other non-ferrous metals.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBall Nose Precision for Curved Surfaces\u003c\/b\u003e: The ball nose tip provides precise control on curved surfaces and contours, delivering smooth, accurate finishes on aluminum parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClog-Resistant Flute Design for Fast Cutting\u003c\/b\u003e: Specialized flute geometry reduces clogging, maintaining steady cutting momentum at high speeds and extending tool life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable Carbide Construction\u003c\/b\u003e: Hard-wearing carbide offers long tool life and consistent performance for deburring, shaping, and finishing in non-ferrous metals.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis burr helps streamline workflows by delivering consistent results on complex geometries, reducing deburring time, and enabling higher material removal rates without sacrificing surface quality. Its toughness and reliable performance give you confidence in busy shop environments, making it a practical choice for engineers, machinists, and hobbyists working with aluminum and other non-ferrous metals.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":41831459651662,"sku":"PRO1500813","price":12.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/C3_aed5a8e8-f566-4e5f-a285-3907b08d5f32.png?v=1789549222"},{"product_id":"pro1500814","title":"Vortex Carbide Burr Type C - Ball Nose Cylinder - Aluminium Cut - 12mm Diameter","description":"\u003cdiv\u003e\n\u003cp\u003eThe Vortex Carbide Burr Type C - Ball Nose Cylinder - Aluminium Cut is a 12 mm diameter carbide burr designed for rapid material removal on aluminum and other soft non-ferrous metals. It’s built to handle frequent use in busy workshops where consistency matters and fast results count.\u003c\/p\u003e \u003cp\u003eIts Type C flute geometry reduces clogging and maintains smooth, continuous cutting at high speeds, while the ball nose tip delivers precise work on curved surfaces and contours. This makes it a versatile choice for deburring, shaping, and finishing tasks across engineering, fabrication, and hobby projects.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eRapid aluminum removal\u003c\/b\u003e: Specialized flute geometry minimizes clogging and keeps cutting smooth and consistent at high speeds, enabling faster material removal on aluminum and other soft non-ferrous metals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBall nose precision for curves\u003c\/b\u003e: The ball nose tip provides accurate detail on contours and rounded features, delivering smooth, refined finishes on complex geometries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable carbide construction\u003c\/b\u003e: Built from robust carbide for long wear resistance and reliable performance across multiple deburring, shaping, and finishing passes.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eWith the Vortex Type C burr, you’ll streamline workflows, reduce downtime from tool clogging or dulling, and achieve dependable, high-quality finishes on curved and contoured workpieces. Its durable edge supports repeated use on aluminum and other non-ferrous metals, making it suitable for both rapid prototyping and ongoing production tasks.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":41831459684430,"sku":"PRO1500814","price":27.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/C3_55b0236a-6970-4c37-b51b-50e359212732.png?v=1789549225"},{"product_id":"pro1500815","title":"Vortex Carbide Burr Type C - Ball Nose Cylinder - Aluminium Cut - 16mm Diameter","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Vortex Carbide Burr Type C - Ball Nose Cylinder - Aluminium Cut is a high-performance rotary burr designed for rapid material removal on aluminum and other soft metals. With a 16 mm diameter and a ball-nose tip, it excels at shaping curved surfaces and intricate contours with steady, controlled cuts.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEfficient Aluminum Deburring and Shaping\u003c\/b\u003e: The specialized flute geometry minimizes clogging and maintains smooth, continuous cutting even at higher speeds, helping you remove material quickly without frequent stops for clearing chips.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBall Nose Precision for Curved Surfaces\u003c\/b\u003e: The ball-shaped tip delivers accurate radii and refined finishes on complex contours, making intricate work simpler and more repeatable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable Carbide for Long Life\u003c\/b\u003e: Crafted from robust carbide, this burr delivers reliable performance and extended edge life when working with aluminum and other non-ferrous metals, reducing tool changes and downtime.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis burr is designed to enhance your workflow across deburring, shaping, and finishing tasks. Its combination of fast material removal, precise curved-surface work, and durable construction helps you achieve clean edges and smooth finishes with fewer passes, improving both productivity and final results.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":41831459749966,"sku":"PRO1500815","price":41.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/C3_35ef649c-1244-4d07-a974-a41857d2724e.png?v=1789549227"},{"product_id":"pro1500829","title":"Vortex Carbide Burr Type D - Ball Nose - Aluminium Cut - 10mm Diameter","description":"\u003cdiv\u003e\n\u003cp\u003eThe Vortex Carbide Burr Type D — Ball Nose — Aluminium Cut (10 mm diameter) is a high-speed rotary tool designed for precise deburring, shaping, and finishing of aluminum and other non-ferrous metals. Its ball nose profile makes it ideal for working on curved surfaces, radii, and tight spaces, delivering smooth transitions and accurate contours. Engineered for engineers, technicians, and serious hobbyists, it combines reliable performance with a durable carbide build for long-lasting results in demanding workflows.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClog-resistant flute geometry\u003c\/b\u003e: Reduces built-up material and chatter, ensuring consistent material removal and cleaner finishes even during long runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBall Nose for curved-surface precision\u003c\/b\u003e: Allows precise detailing on contours and radii, improving control and reducing need for rework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable carbide construction\u003c\/b\u003e: Delivers long tool life at high speeds, minimizing tool changes and downtime in busy shop environments.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eWith this burr, you’ll experience faster setup and predictable results from rough shaping through final finishing. The combination of aluminum-specific design, clog-free performance, and rugged carbide means smoother workflows, fewer interruptions, and a consistently high-quality surface on non-ferrous parts. It’s a reliable choice for production and prototyping alike, where precision and repeatability matter.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":41831461912654,"sku":"PRO1500829","price":9.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/D3_d985478e-d69d-46fd-ac7b-c775087a2d41.png?v=1789549269"},{"product_id":"pro1500830","title":"Vortex Carbide Burr Type D - Ball Nose - Aluminium Cut - 12mm Diameter","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Vortex Carbide Burr Type D - Ball Nose - Aluminium Cut is a precision cutting accessory built for high-speed work on aluminium and other soft non-ferrous metals. With a 12 mm diameter and a ball nose profile, it delivers controlled material removal and smooth finishes on curved surfaces, making it ideal for deburring, shaping, and detailing.\n\u003c\/p\u003e \u003cp\u003e\nEngineers, machinists, tradespeople, and hobbyists will appreciate its reliable performance: the burr’s flute geometry is engineered to resist clogging, so you can work longer between cleanouts without sacrificing cut quality or finish.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClog-resistant flute geometry\u003c\/b\u003e: Maintains smooth material removal and reduces downtime by resisting aluminium buildup during long runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBall nose for curved-surface precision\u003c\/b\u003e: Enables precise shaping and finishing on radii, contours, and tight pockets where flat burrs struggle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable carbide construction\u003c\/b\u003e: Delivers long tool life under high-speed cutting, maintaining sharpness and consistent results over many jobs.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThe Vortex burr helps you complete deburring, shaping, and finishing tasks with confidence by delivering fast, controlled material removal, smooth surface finishes, and long-lasting performance. Its combination of clog-resistant geometry, ball-nose precision, and robust carbide construction supports efficient workflows, reduces rework, and improves overall results on aluminium and other non-ferrous metals.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":41831461978190,"sku":"PRO1500830","price":13.46,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/D3_91827d4b-fcc7-4dab-9090-2d73f46cada9.png?v=1789549272"},{"product_id":"pro1500831","title":"Vortex Carbide Burr Type D - Ball Nose - Aluminium Cut - 16mm Diameter","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Vortex Carbide Burr Type D – Ball Nose – Aluminium Cut is a high-speed burr engineered for fast, clean deburring, shaping, and finishing of aluminum and other non-ferrous metals. This 16 mm diameter carbide burr features a ball nose profile that excels on curved surfaces and tight pockets, while its flute geometry minimizes clogging to maintain smooth material removal across long cuts.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBall Nose Precision for Curved Surfaces\u003c\/b\u003e: The rounded tip enables precise work on radii and contours, delivering smooth finishes on curved aluminum features and inside recesses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAnti-Clog Flute Geometry for Smooth Cutting\u003c\/b\u003e: Special flute design reduces chip buildup in soft metals, helping you maintain speed and produce consistent edges without stalling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable Carbide for Long Tool Life\u003c\/b\u003e: Made from high-quality carbide, this burr resists wear at high speeds, delivering reliable performance through repeated deburring and finishing tasks.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nWhether you’re upgrading shop tooling or tackling a challenging aluminum project, this burr helps you finish faster with fewer passes and less rework. The ball nose gives control in curves, pockets, and complex geometries, while the anti-clog design keeps your workflow steady at higher speeds. Built for reliability, the Type D burr delivers consistent results from first cut to final finish, helping you meet tight tolerances and boost overall productivity.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":41831462174798,"sku":"PRO1500831","price":24.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/D3_b8c3edf9-de1a-4b52-b000-b66efa5e690f.png?v=1789549275"},{"product_id":"pro1500854","title":"Vortex Carbide Burr Type F - Ball Nose Tree - Aluminium Cut - 6mm Diameter","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Vortex Carbide Burr Type F - Ball Nose Tree - Aluminium Cut is a precision rotary burr designed for fast, clean aluminum work. With a 6 mm diameter, its tree-shaped flutes and ball nose tip are optimized for smooth material removal on non-ferrous metals, delivering consistent results without clogging even at higher speeds.\n\u003c\/p\u003e \u003cp\u003e\nDesigned for engineers, machinists, hobbyists, and manufacturing teams, this burr makes contouring, shaping, and deburring aluminum and similar alloys easier—minimizing chatter and leaving a refined finish on complex geometries.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eEfficient aluminum removal\u003c\/b\u003e: Specially tuned for softer metals like aluminum, enabling fast material removal with a smooth, ready-to-finish surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClog-resistant flute geometry\u003c\/b\u003e: Unique flute design minimizes chip buildup, reducing downtime and maintaining steady cuts at high speeds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBall nose tree tip for tight contours\u003c\/b\u003e: Tree-shaped profile and rounded tip provide precise shaping in intricate and hard-to-reach areas.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nWhether you’re refining internal pockets, smoothing radii, or deburring sharp edges, this carbide burr delivers reliable, repeatable results. The durable carbide construction resists wear for longer tool life, while the aluminum-optimized geometry helps you finish jobs faster with fewer passes and a superior surface quality.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":41831464730702,"sku":"PRO1500854","price":7.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/F3_b4c173d6-4529-496c-bd10-1cf1f7d28583.png?v=1789549344"},{"product_id":"pro1500855","title":"Vortex Carbide Burr Type F - Ball Nose Tree - Aluminium Cut - 10mm Diameter","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Vortex Carbide Burr Type F – Ball Nose Tree – Aluminium Cut is a precision cutting tool designed for aluminum and other soft metals. Its compact 10 mm diameter fits into tight spaces, making deburring, shaping, and finishing tasks quicker and more controlled.\n\u003c\/p\u003e\n\u003cp\u003e\nWith a distinctive tree-like flute arrangement and a ball nose tip, this burr delivers smooth, accurate cuts at high speeds, helping you reach complex contours and radii with confidence. Crafted from durable carbide, it stands up to demanding non-ferrous-metal work, providing reliable performance and long tool life.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClog-resistant flute geometry\u003c\/b\u003e: Optimized for aluminum and other non-ferrous metals to maintain chip clearance, reducing clogging and interruptions so you can cut smoothly at higher speeds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTree-flute pattern with ball nose for tight contours\u003c\/b\u003e: Reaches into complex radii and pockets with precise control, delivering clean radii and refined finishes in hard-to-reach areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable carbide construction for longevity\u003c\/b\u003e: Wear-resistant, temperature-tolerant material provides consistent performance across multiple passes, reducing tool changes and boosting productivity.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nUse the Vortex Type F burr for deburring, shaping, and finishing aluminum and other soft metals. Its combination of clog-resistant cutting, reach into intricate features, and durable carbide construction helps you complete complex work faster, achieve smoother surfaces, and maintain consistent results across non-ferrous parts.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":41831464829006,"sku":"PRO1500855","price":11.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/F3_35f8354b-0bde-4699-82b1-3579a6495594.png?v=1789549347"},{"product_id":"pro1500856","title":"Vortex Carbide Burr Type F - Ball Nose Tree - Aluminium Cut - 12mm Diameter","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Vortex Carbide Burr Type F – Ball Nose Tree – Aluminium Cut is a precision cutting tool designed for efficient material removal in softer metals, especially aluminum. Its flute geometry is engineered to resist loading, allowing smooth, continuous cutting even at high speeds. The tree-like profile with a ball nose tip makes it ideal for working in tight spaces and along complex contours, delivering consistent results in contouring and shaping tasks.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eClog-resistant flute geometry\u003c\/b\u003e: Maintains smooth, uninterrupted cutting at high speeds by reducing chip buildup, helping you finish larger areas faster without interruptions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTree-shaped flute with ball nose tip\u003c\/b\u003e: Reaches intricate, hard-to-access features with precision, enabling cleaner radii and accurate shaping in complex geometries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable carbide construction\u003c\/b\u003e: Built for long tool life and reliable performance in non-ferrous metals, supporting deburring, shaping, and finishing tasks with consistent results.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nDesigned for engineers, makers, and technicians working with aluminum and other non-ferrous metals, this burr helps streamline workflows by reducing downtime from clogging and rework. Its robust carbide construction and specialized geometry translate to faster material removal, smoother finishes, and dependable performance across a range of finishing and contouring applications.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":41831464894542,"sku":"PRO1500856","price":19.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/F3_c957e637-6d56-45f9-a639-2efb72591874.png?v=1789549350"},{"product_id":"pro1500857","title":"Vortex Carbide Burr Type F - Ball Nose Tree - Aluminium Cut - 16mm Diameter","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Vortex Carbide Burr Type F – Ball Nose Tree – Aluminium Cut is a precision cutting tool designed for efficient material removal in softer metals, especially aluminum. With a 16 mm diameter and a specialized flute geometry, it delivers smooth, clog-free cutting even at high speeds, making deburring, shaping, and finishing faster and more predictable.\n\u003c\/p\u003e \u003cp\u003e\nIts distinctive tree-like profile and ball nose tip reach into tight pockets and complex contours, enabling precise contouring and shaping where other burrs struggle. Crafted from durable carbide, this burr is built for repeated use in non-ferrous metals, offering reliable performance in engineering, manufacturing, and workshop environments.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAnti-Clog Flute Design\u003c\/b\u003e: Maintains smooth cutting and continuous material removal on aluminum, reducing downtime caused by chip buildup, even at high speeds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBall Nose Tree Geometry\u003c\/b\u003e: Reaches tight radii and intricate contours for precise contouring, shaping, and finishing in complex features.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable Carbide Construction\u003c\/b\u003e: Delivers long tool life and consistent performance for deburring and finishing tasks in non-ferrous metals.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nWhether you're an engineer, a machinist, or a hobbyist working with aluminum, this burr accelerates your workflow. The anti-clog design minimizes stoppages, the ball nose tree lets you sculpt complex forms with confidence, and the carbide construction stands up to repeated use, delivering reliable results across deburring, shaping, and finishing tasks.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":41831465156686,"sku":"PRO1500857","price":27.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/F3_9fc4e646-65f9-429a-a3b4-9413e662c091.png?v=1789549353"},{"product_id":"pro1500898","title":"Vortex Carbide Burr Type L - Ball Nose Cone - Aluminium Cut - 6mm Diameter","description":"\u003cdiv\u003e\n\u003cp\u003eThe Vortex Carbide Burr Type L - Ball Nose Cone - Aluminium Cut is a precision rotary burr designed for efficient cutting and shaping of softer metals, especially aluminum. The ball nose cone enables precise contouring in tight spaces, ideal for deburring, shaping, and finishing on aluminum and other non-ferrous metals.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBall Nose Contouring for Precise Surfaces\u003c\/b\u003e: The rounded tip follows complex curves with control, delivering smooth, accurate finishes on intricate aluminum shapes and in hard‑to‑reach areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClog-Resistant Flute Design for Faster Material Removal\u003c\/b\u003e: Special flute geometry minimizes built‑up edge and clogging, enabling steady cuts at higher speeds and reducing downtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable Carbide for Long Tool Life\u003c\/b\u003e: Hard carbide construction resists wear when cutting aluminum and other non‑ferrous metals, providing reliable performance across jobs and fewer tool changes.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eBy combining precise contouring, clog‑resistant cutting, and durable construction, this burr helps you complete deburring, shaping, and finishing tasks faster with consistent results. It supports smoother surfaces, reduced rework, and improved overall workflow for engineers, machinists, and hobbyists working with aluminum and other non‑ferrous materials.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":41831470104654,"sku":"PRO1500898","price":7.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/L3_b3bb295f-7a4c-485c-a26e-e71aec37170c.png?v=1789549477"},{"product_id":"pro1500899","title":"Vortex Carbide Burr Type L - Ball Nose Cone - Aluminium Cut - 10mm Diameter","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Vortex Carbide Burr Type L Ball Nose Cone for Aluminium Cut is a 10 mm diameter precision rotary tool designed for shaping, deburring, and finishing aluminum and other non-ferrous metals. Its ball nose profile and carbide construction deliver smooth contours and repeatable results, even in tight spaces and intricate features.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBall nose contouring for tight radii\u003c\/b\u003e: The ball-shaped tip enables precise contouring and smooth transitions, so you can accurately shape complex features without gouging delicate edges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAnti-clog flute geometry for high-speed cuts\u003c\/b\u003e: Special flute design minimizes chip buildup at speed, delivering faster material removal and cleaner finishes on aluminum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable carbide construction for long tool life\u003c\/b\u003e: Built to resist wear when cutting non-ferrous metals, providing reliable performance and consistent results across tasks.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis combination helps you streamline workflows, reduce setup time, and achieve dependable finishes across contoured surfaces. Use it for precise deburring, shaping, and finishing on aluminum and other non-ferrous metals with confidence in steady, repeatable performance.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":41831470301262,"sku":"PRO1500899","price":14.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/L3_078e0e18-a60c-4ed5-a64f-f9139cf5b351.png?v=1789549480"},{"product_id":"pro1500900","title":"Vortex Carbide Burr Type L - Ball Nose Cone - Aluminium Cut - 12mm Diameter","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Vortex Carbide Burr Type L - Ball Nose Cone - Aluminium Cut is a precision rotary tool designed for efficient cutting, shaping, and deburring of softer metals—primarily aluminum. Its ball nose geometry delivers smooth contours and accurate finish in tight spaces, making it ideal for detailed work on non-ferrous metals and small production runs.\n\u003c\/p\u003e \u003cp\u003e\nDesigned for engineers, machinists, hobbyists, and shop crews, this 12 mm diameter burr pairs durable carbide with a flute layout that minimizes clogging, even at higher speeds, so you can work faster with less downtime.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBall nose contouring for precision\u003c\/b\u003e: The rounded tip enables smooth, accurate curves and tight-area work for precise shaping and finishing on aluminum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eType L anti-clog flute design\u003c\/b\u003e: Flute geometry reduces chip packing and heat buildup, ensuring steady material removal at high spindle speeds.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable carbide construction for long life\u003c\/b\u003e: Hardened carbide resists wear, delivering consistent results across deburring, shaping, and finishing tasks on aluminum and other non-ferrous metals.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis burr helps you streamline workflows by delivering reliable, repeatable contouring with minimal clogging and fewer reworks. Its robust build supports fast material removal without sacrificing finish quality, enabling cleaner edges, tighter tolerances, and faster turnaround on projects—from prototype adjustments to production finishing.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":41831470399566,"sku":"PRO1500900","price":21.15,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/L3_75a88f24-c062-4b8b-8688-e1f3ceba1e97.png?v=1789549483"},{"product_id":"pro1500901","title":"Vortex Carbide Burr Type L - Ball Nose Cone - Aluminium Cut - 16mm Diameter","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Vortex Carbide Burr Type L with Ball Nose Cone is a precision cutting tool designed for aluminum and other non-ferrous metals. With a 16 mm diameter and a ball nose profile, it excels at contouring complex shapes and reaching tight spaces for detailed finishing, deburring, and shaping tasks.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eBall nose cone for precise contouring\u003c\/b\u003e: enables accurate radii and smooth transitions in tight or intricate workpieces, reducing rework and improving part fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClog-resistant flute design\u003c\/b\u003e: maintains consistent cutting performance at high speeds by minimizing aluminum buildup, delivering faster material removal with fewer interruptions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable carbide construction\u003c\/b\u003e: delivers long tool life and reliable performance in repeated use on aluminum and other non-ferrous metals, even under demanding workloads.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis burr supports faster, more predictable results across deburring, shaping, and finishing tasks. Its combination of a robust carbide body, clog-resistant geometry, and a ball nose profile helps you achieve smooth surfaces, accurate contours, and repeatable outcomes—making it a dependable choice for engineers, machine shops, and dedicated hobbyists working with aluminum.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":41831470432334,"sku":"PRO1500901","price":35.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/L3_99b9d290-6331-426f-b034-ac22bb26aec0.png?v=1789549486"}],"url":"https:\/\/www.protool-ltd.co.uk\/collections\/carbide-burrs-aluminium-cut.oembed","provider":"Protool Precision Tools","version":"1.0","type":"link"}