{"title":"DNMG Turning Tool Holders","description":null,"products":[{"product_id":"pro1600007","title":"Vortex Turning Tool Holder Clamp Lock 93 DEG - For DNMG1104 Inserts - MDJNR1616H11","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Vortex Turning Tool Holder Clamp Lock 93 DEG is a precision turning solution designed for DNMG1104 inserts, delivering secure seating and repeatable accuracy in turning operations. Part of the MDJNR1616H11 family, it supports dependable performance and a consistent surface finish in demanding machining tasks. For setup, consider compatible accessories: \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/WS061025\"\u003e\u003cbutton class=\"button\"\u003eClamping Screw\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/MD1103\"\u003e\u003cbutton class=\"button\"\u003eShim\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/S2\"\u003e\u003cbutton class=\"button\"\u003eWrench\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/MCL1814\"\u003e\u003cbutton class=\"button\"\u003eClamp\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/MSP513\"\u003e\u003cbutton class=\"button\"\u003eAnvil Screw\u003c\/button\u003e\u003c\/a\u003e.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e93-degree orientation\u003c\/b\u003e: Optimized geometry for DNMG1104 inserts, enabling efficient, precise turning paths and improved chip control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamp Lock mechanism\u003c\/b\u003e: Robust locking action secures the insert position, minimizing movement and tool chatter during cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDNMG1104 insert compatibility\u003c\/b\u003e: Specifically engineered to fit standard DNMG1104 inserts for quick setup and consistent seating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMDJNR1616H11 integration\u003c\/b\u003e: Part of the MDJNR1616H11 family, offering a reliable interface and predictable performance across turning operations.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis tool holder is designed to enhance turning accuracy and surface quality by keeping the insert square, stable, and properly clamped throughout the cut. The 93-degree orientation supports clean, repeatable finishes on small-diameter workpieces, while the Clamp Lock mechanism helps reduce rework and scrap. Whether you’re performing finishing passes or roughing operations, this holder provides dependable support for DNMG1104 inserts, contributing to longer tool life and more consistent results in automotive, aerospace, and general engineering turning tasks.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":40288580567118,"sku":"PRO1600007","price":15.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/mdjnr-2_87b9c2c1-eb91-4a00-bc46-505dd9d9cf80.png?v=1695999588"},{"product_id":"pro1600008","title":"Vortex Turning Tool Holder Clamp Lock 93 DEG - For DNMG1104 Inserts - MDJNR2020K11","description":"\u003cdiv\u003e\n\u003cp\u003eMeet the Vortex Turning Tool Holder Clamp Lock 93° for DNMG1104 inserts—the MDJNR2020K11 model designed for machinists who demand precise, repeatable turning results. The 93-degree orientation and Clamp Lock mechanism secure the DNMG1104 insert for reliable performance across cutting passes.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAngle\u003c\/b\u003e: 93-degree orientation optimized for DNMG1104 inserts, providing favorable geometry for turning operations and chip flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamp Lock\u003c\/b\u003e: Robust locking system that ensures secure insert seating and minimizes insert movement during cutting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInsert compatibility\u003c\/b\u003e: Specifically designed to hold DNMG1104 inserts, enabling consistent seating and cutting efficiency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMDJNR series\u003c\/b\u003e: Part of the MDJNR family, engineered to maximize reliability and accuracy in turning tasks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAccessories\u003c\/b\u003e: Pair with setup components to complete your tooling solution: \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/WS061025\"\u003e\u003cbutton class=\"button\"\u003eClamping Screw\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/MD1103\"\u003e\u003cbutton class=\"button\"\u003eShim\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/S2\"\u003e\u003cbutton class=\"button\"\u003eWrench\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/MCL1814\"\u003e\u003cbutton class=\"button\"\u003eClamp\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/MSP513\"\u003e\u003cbutton class=\"button\"\u003eAnvil Screw\u003c\/button\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eThe Vortex tool holder delivers secure insert positioning and reliable clamping, empowering you to achieve high-quality finishes with fewer rework cycles. Its design supports steady cutting conditions, helping you maintain tight tolerances on turning operations and extend insert life by reducing play during engagement. Whether you're working on small-diameter shafts or precision shoulders, this holder provides the stability and repeatability you need for consistent results.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":40288580599886,"sku":"PRO1600008","price":16.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/mdjnr-2_eb41cd93-b0d7-4d3f-b0a1-fabd2aac9610.png?v=1695999591"},{"product_id":"pro1600009","title":"Vortex Turning Tool Holder Clamp Lock 93 DEG - For DNMG1104 Inserts - MDJNR2525M11","description":"\u003cdiv\u003e\n\u003cp\u003eThe Vortex Turning Tool Holder Clamp Lock 93° for DNMG1104 inserts (MDJNR2525M11) delivers precision, secure insert seating, and reliable performance for turning operations. Designed for machinists who demand consistency and efficiency, this tool holder keeps DNMG1104 inserts locked in place for repeatable results.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e93° orientation\u003c\/b\u003e: Optimized angle for DNMG1104 inserts to enhance engagement and chip control during turning tasks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamp Lock mechanism\u003c\/b\u003e: Robust clamping that resists movement under cutting forces for stable seating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDNMG1104 insert compatibility\u003c\/b\u003e: Specifically engineered to fit standard DNMG1104 insert geometry for reliable alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMDJNR2525M11 designation\u003c\/b\u003e: Clear identification within the MDJNR family for easy cross-reference and interchangeability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTurn-ready performance\u003c\/b\u003e: Tailored for turning applications, delivering consistent finishes across multiple passes.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eBy providing secure, repeatable insert seating and a stable turning interface, this holder minimizes tool deflection and enhances surface quality. The Clamp Lock system helps you achieve cleaner finishes, higher-quality parts, and reduced downtime from readjustments. Ideal for DNMG1104 turning tasks, the MDJNR2525M11 holder supports efficient workflows from roughing to finishing. For best results, pair with matching clamping components to fine-tune clamping pressure and alignment:\n\u003c\/p\u003e\n\u003cp\u003e\n\u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/WS061030\"\u003e\u003cbutton class=\"button\"\u003eClamping Screw\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/MD1103\"\u003e\u003cbutton class=\"button\"\u003eShim\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/S2\"\u003e\u003cbutton class=\"button\"\u003eWrench\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/MCL1814\"\u003e\u003cbutton class=\"button\"\u003eClamp\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/MSP513\"\u003e\u003cbutton class=\"button\"\u003eAnvil Screw\u003c\/button\u003e\u003c\/a\u003e\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":40288580632654,"sku":"PRO1600009","price":17.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/mdjnr-2_edd7bc0d-d52d-4205-8a9b-fb7c51a61013.png?v=1695999595"},{"product_id":"pro1600010","title":"Vortex Turning Tool Holder Clamp Lock 93 DEG - For DNMG1504 Inserts - MDJNR2020K1504","description":"\u003cdiv\u003e\n\u003cp\u003e\nMeet the Vortex Turning Tool Holder Clamp Lock 93 DEG for DNMG1104 inserts—designed for precision-focused machinists and CNC operators who demand consistency in turning applications. With a dedicated 93° orientation and a reliable Clamp Lock mechanism, this holder ensures secure insert positioning and dependable performance on every cut.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e93° orientation\u003c\/b\u003e: Optimized geometry for turning DNMG1104 inserts, promoting efficient chip flow and stable engagement during tool passes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamp Lock mechanism\u003c\/b\u003e: Robust locking action that holds the insert firmly in place, reducing movement under load and helping maintain precision through long runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMDJNR series compatibility\u003c\/b\u003e: Specifically engineered to align with DNMG1104 insert geometry for consistent seating and repeatable results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePrecision seating and alignment\u003c\/b\u003e: Defined seating surfaces ensure accurate corner radii and reliable cutting edge contact across multiple passes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable construction\u003c\/b\u003e: Built to withstand the rigors of turning operations, delivering stable performance and long-term reliability.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis tool holder delivers tangible benefits: tighter tolerances, smoother finishes, and extended insert life thanks to secure clamp pressure and consistent insert alignment. It’s an excellent choice for production environments where repeatability and efficiency matter, whether you're roughing, finishing, or performing heavy-duty turning tasks with DNMG1104 inserts. For setup and accessory options, consider the following components to optimize performance: Clamping Screw (https:\/\/www.protool-ltd.co.uk\/products\/WS061025), Shim (https:\/\/www.protool-ltd.co.uk\/products\/MD1504), Wrench (https:\/\/www.protool-ltd.co.uk\/products\/S3), Clamp (https:\/\/www.protool-ltd.co.uk\/products\/MCL2114), Anvil Screw (https:\/\/www.protool-ltd.co.uk\/products\/MSP617).\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":40288580665422,"sku":"PRO1600010","price":16.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/mdjnr-2_4839af3d-2c58-4ad5-9e90-6064ecd904f7.png?v=1695999598"},{"product_id":"pro1600011","title":"Vortex Turning Tool Holder Clamp Lock 93 DEG - For DNMG1504 Inserts - MDJNR2525M1504","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe MDJNR2525M1504 Vortex Turning Tool Holder with a 93-degree orientation is designed for DNMG1104 inserts, delivering precise insert seating and reliable clamping for repeatable turning accuracy.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e93° orientation\u003c\/b\u003e: Optimizes cutting geometry and clearance for typical turning passes, promoting smooth chip flow and consistent edge exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamp Lock mechanism\u003c\/b\u003e: Secure, robust clamping that minimizes insert movement for stable performance during heavy cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDNMG1104 insert compatibility\u003c\/b\u003e: Specifically engineered to hold DNMG1104 inserts with reliable indexing and seating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRigid construction\u003c\/b\u003e: Hardened, durable tool holder body that resists deflection to preserve accuracy over many cycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFast insert changes\u003c\/b\u003e: Efficient clamping system enables quicker tool setup and reduced machine downtime between operations.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis Vortex turning tool holder excels in turning operations on lathes and CNC turning centers where precision and consistency matter. By ensuring secure insert positioning and stable clamping, it helps you achieve uniform depth of cut, predictable tool life, and superior surface finish across roughing and finishing passes. For accessories that support quick setup and reliable performance, the following options are commonly used with this family of holders:\n\u003c\/p\u003e \u003cdiv class=\"button-container\"\u003e\n\u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/WS061030\"\u003e\u003cbutton class=\"button\"\u003eClamping Screw\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/MD1504\"\u003e\u003cbutton class=\"button\"\u003eShim\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/S3\"\u003e\u003cbutton class=\"button\"\u003eWrench\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/MCL2114\"\u003e\u003cbutton class=\"button\"\u003eClamp\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/MSP617\"\u003e\u003cbutton class=\"button\"\u003eAnvil Screw\u003c\/button\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":40288580698190,"sku":"PRO1600011","price":17.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/mdjnr-2_4edb7a48-1fcb-4f36-9113-c3649887a287.png?v=1695999602"},{"product_id":"pro1600012","title":"Vortex Turning Tool Holder Clamp Lock 93 DEG - For DNMG1506 Inserts - MDJNR2020K1506","description":"\u003cdiv\u003e\n\u003cp\u003eThe MDJNR2020K1506 Vortex Turning Tool Holder with Clamp Lock delivers precise 93° orientation for DNMG1104 inserts, engineered for turning operations where stability, repeatability, and finish quality matter.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e93° orientation\u003c\/b\u003e: Optimized geometry for DNMG1104 inserts to achieve efficient engagement, better clearance, and predictable cutting performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamp Lock mechanism\u003c\/b\u003e: Secure, repeatable clamping that minimizes insert movement under cutting forces for consistent tolerances and surface finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDNMG1104 insert compatibility\u003c\/b\u003e: Specifically designed to accommodate DNMG1104 inserts, simplifying setup and ensuring reliable seating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRugged construction\u003c\/b\u003e: Robust body and precision seating surface built to withstand demanding turning applications with minimal deflection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEasy integration\u003c\/b\u003e: Designed for straightforward mounting in common CNC lathes and turning centers, helping reduce setup time and downtime.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eWith the Vortex MDJNR tool holder, you can expect stable cutting conditions, improved insert life, and tighter tolerances across roughing and finishing passes. The clamp lock keeps the insert securely positioned through varying loads, delivering clean chips, consistent depth of cut, and a reliable path to high-quality machined parts such as shafts, bushings, and small-diameter components.\u003c\/p\u003e \u003cp\u003eRelated components you might consider:\nClamping Screw (https:\/\/www.protool-ltd.co.uk\/products\/WS061030), Shim (https:\/\/www.protool-ltd.co.uk\/products\/MD1504), Wrench (https:\/\/www.protool-ltd.co.uk\/products\/S3), Clamp (https:\/\/www.protool-ltd.co.uk\/products\/MCL2114), Anvil Screw (https:\/\/www.protool-ltd.co.uk\/products\/MSP619).\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":40288580763726,"sku":"PRO1600012","price":16.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/mdjnr-2_f9f99d76-0f67-42c3-8e38-531fcadac256.png?v=1695999605"},{"product_id":"pro1600013","title":"Vortex Turning Tool Holder Clamp Lock 93 DEG - For DNMG1506 Inserts - MDJNR2525M1506","description":"\u003cdiv\u003e\n\u003cp\u003eThe MDJNR2525M1506 Vortex Turning Tool Holder with Clamp Lock is a precision turning solution designed for DNMG1104 inserts. It provides secure insert seating and a 93-degree orientation to deliver consistent, high-quality finishes in turning operations.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e93° orientation\u003c\/b\u003e: Optimized for DNMG1104 inserts to maximize cutting efficiency and chip control during turning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamp Lock mechanism\u003c\/b\u003e: Ensures repeatable insert positioning and robust clamping for dependable performance over long runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMDJNR series design\u003c\/b\u003e: Part of the MDJNR family, engineered to pair perfectly with DNMG1104 insert geometry for stable cutting action.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable construction\u003c\/b\u003e: Built to withstand the rigors of turning, maintaining rigidity and reliability across jobs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eQuick setup and reliable seating\u003c\/b\u003e: Simplified insert installation reduces downtime and helps maintain accurate tool paths.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eWith secure insert seating and a precise 93-degree orientation, this tool holder minimizes insert movement and chatter, delivering uniform surface finishes and longer insert life. The Clamp Lock design supports repeatable results across multiple passes, making it ideal for profiling, finishing, and light roughing tasks in a variety of turning applications. By reducing setup time and preserving tight tolerances, it helps machinists achieve tighter diameter control and smoother tool advancement.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/WS061030\"\u003eClamping Screw\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/MD1504\"\u003eShim\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/S3\"\u003eWrench\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/MCL2114\"\u003eClamp\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/MSP619\"\u003eAnvil Screw\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":40288580796494,"sku":"PRO1600013","price":17.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/mdjnr-2_727f3f8a-d735-4ac1-90fa-aad1fc1eb9df.png?v=1695999609"},{"product_id":"pro1600028","title":"Vortex Turning Tool Holder Pin Lock 93 DEG - For DNMG1104 Inserts - PDJNR1616H11","description":"\u003cdiv\u003e\n\u003cp\u003e\nPrecision-focused turning tool holder designed for machinists and job shops that demand consistent accuracy. The Vortex Turning Tool Holder with 93° geometry and Pin Lock is optimized for DNMG1104 inserts, delivering secure clamping and repeatable results in turning operations.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e93° geometry\u003c\/b\u003e: Optimized 93-degree orientation aligns with DNMG1104 inserts to improve approach angle and chip flow, aiding finish quality and consistency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePin Lock clamping\u003c\/b\u003e: Pin-driven locking provides positive seating and repeatable insert positioning for reliable tool life and predictable cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDNMG1104 insert compatibility\u003c\/b\u003e: Specifically engineered to hold DNMG1104 inserts securely, maximizing engagement and minimizing insert movement during heavy cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePDJNR1616H11 design\u003c\/b\u003e: Part of the PDJNR series, featuring a robust shank and tight tolerances for stable performance across multiple passes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable construction\u003c\/b\u003e: Built from high-quality tool steel with precision ground interfaces to resist wear and maintain accuracy over time.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis combination delivers tangible manufacturing advantages: precise insert seating reduces runout, steady clamping minimizes vibration, and consistent insert indexing supports predictable cycle times and superior surface finishes on a range of materials. For a complete setup, consider compatible hardware and accessories to optimize performance:\n\u003c\/p\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/VHX0613\"\u003e\u003cbutton class=\"button\"\u003eClamping Screw\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/PD11270\"\u003e\u003cbutton class=\"button\"\u003eShim\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/S2-5\"\u003e\u003cbutton class=\"button\"\u003eWrench\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/LV3\"\u003e\u003cbutton class=\"button\"\u003eLever\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/SP3\"\u003e\u003cbutton class=\"button\"\u003eShim Pin\u003c\/button\u003e\u003c\/a\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":40288581288014,"sku":"PRO1600028","price":23.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/pdjnr-2_0f0279f8-02e7-4243-befb-8be035d8227c.png?v=1695999664"},{"product_id":"pro1600029","title":"Vortex Turning Tool Holder Pin Lock 93 DEG - For DNMG1104 Inserts - PDJNR2020K11","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Vortex Turning Tool Holder PDJNR2020K11 is designed for DNMG1104 inserts, delivering precision and reliability in turning operations for professional machinists.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e93-Degree orientation\u003c\/b\u003e: Optimized cutting angle for DNMG1104 inserts to improve approach geometry and chip control during turning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePin Lock mechanism\u003c\/b\u003e: Secure insert positioning with reliable clamping to minimize movement under load and extend insert life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDNMG1104 insert compatibility\u003c\/b\u003e: Specifically engineered to match the geometry of DNMG1104 inserts for consistent seating and repeatable results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePDJNR2020K11 series\u003c\/b\u003e: Sized and engineered to deliver stable engagement on turning centers, enhancing accuracy on every pass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRugged tool holder design\u003c\/b\u003e: Built to withstand daily turning applications with durable construction that maintains precision over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRelated accessories\u003c\/b\u003e: \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/VHX0613\"\u003e\u003cbutton class=\"button\"\u003eClamping Screw\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/PD11270\"\u003e\u003cbutton class=\"button\"\u003eShim\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/S2-5\"\u003e\u003cbutton class=\"button\"\u003eWrench\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/LV3\"\u003e\u003cbutton class=\"button\"\u003eLever\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/SP3\"\u003e\u003cbutton class=\"button\"\u003eShim Pin\u003c\/button\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nWith secure insert positioning and a robust clamping system, this tool holder helps you achieve high-quality finishes and repeatable tolerances in turning tasks. The 93-degree orientation supports efficient chip evacuation and stable cutting edges, while the Pin Lock mechanism minimizes insert movement across multiple passes. Ideal for turning operations across a range of materials, the PDJNR2020K11 delivers dependable performance you can count on in production environments.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":40288581320782,"sku":"PRO1600029","price":24.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/pdjnr-2_88416836-a3ff-42a9-af6b-f0a0c8b1ae21.png?v=1695999667"},{"product_id":"pro1600030","title":"Vortex Turning Tool Holder Pin Lock 93 DEG - For DNMG1104 Inserts - PDJNR2525M11","description":"\u003cdiv\u003e\n\u003cp\u003eIntroducing the Vortex Turning Tool Holder Pin Lock 93°—a precision turning solution designed for professionals who require dependable insert seating and consistent results with DNMG1104 inserts. Built around the PDJNR2525M11 geometry, this holder delivers secure clamping and stable performance across demanding turning applications.\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/vortex.png?v=1657700949\"\u003e\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e93° orientation\u003c\/b\u003e: Optimizes insert geometry for DNMG1104 inserts to enhance cutting efficiency and surface finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePin Lock clamping\u003c\/b\u003e: A dedicated pin-driven locking mechanism that secures the insert with repeatable, rigid engagement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDNMG1104 compatibility\u003c\/b\u003e: Specifically designed for DNMG1104 inserts, ensuring correct seat height and alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSolid, precise body\u003c\/b\u003e: Robust construction minimizes vibration and deflection during heavy cuts for greater accuracy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClear part identity\u003c\/b\u003e: PDJNR2525M11 designation helps with inventory and fast replacement when needed.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eWith this Vortex tool holder, turning operations benefit from tighter tolerances, improved chip control, and shorter setup times. The pin-lock system reduces insert movement, which translates to more consistent tool life and better surface finish across runs. It is an ideal choice for job shops and production environments that demand repeatable results from DNMG1104 inserts.\u003c\/p\u003e \u003cp\u003eFor a complete setup, consider these helpful accessories: \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/VHX0613\"\u003e\u003cbutton class=\"button\"\u003eClamping Screw\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/PD11270\"\u003e\u003cbutton class=\"button\"\u003eShim\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/S2-5\"\u003e\u003cbutton class=\"button\"\u003eWrench\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/LV3\"\u003e\u003cbutton class=\"button\"\u003eLever\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/SP3\"\u003e\u003cbutton class=\"button\"\u003eShim Pin\u003c\/button\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":40288581353550,"sku":"PRO1600030","price":25.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/pdjnr-2_bbc45304-c567-4388-81dd-a078f6992a83.png?v=1695999671"},{"product_id":"pro1600031","title":"Vortex Turning Tool Holder Pin Lock 93 DEG - For DNMG1504 Inserts - PDJNR2020K1504","description":"\u003cdiv\u003e\n\u003cp\u003e\nMeet the PDJNR2020K1504 Vortex Turning Tool Holder — a precision tool holder designed for DNMG1506 inserts, built for dependable performance in turning applications. Its 93-degree orientation with a Pin Lock ensures secure insert seating and reliable clamping for consistent, high-quality finishes.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAngle\u003c\/b\u003e: 93-degree orientation optimized for DNMG1506 inserts to enhance cutting geometry and reach.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInsert compatibility\u003c\/b\u003e: specifically engineered to hold DNMG1506 inserts securely and reliably.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLocking system\u003c\/b\u003e: Pin Lock mechanism provides repeatable, wobble-free clamping for stable cutting and consistent results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eBuild and fit\u003c\/b\u003e: robust, compact tool holder body designed to minimize deflection during turning operations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEase of use\u003c\/b\u003e: straightforward insert installation and locking, reducing setup time between jobs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApplications\u003c\/b\u003e: ideal for precision turning tasks on CNC lathes, including finishing and light roughing passes.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis Vortex Turning Tool Holder delivers repeatable insert positioning and secure clamping that translates into fewer tool changes, improved surface finish, and more predictable cycle times. The 93-degree geometry supports efficient chip flow and effective engagement with DNMG1506 inserts, making it a reliable choice for shops upgrading turning operations. Pair it with standard clamping components to create a complete, repeatable tooling setup tailored to your turning workflows.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":40288581451854,"sku":"PRO1600031","price":25.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/pdjnr-2_f8cdd89a-e356-4f02-b11b-ee0ba610c4bb.png?v=1695999675"},{"product_id":"pro1600032","title":"Vortex Turning Tool Holder Pin Lock 93 DEG - For DNMG1504 Inserts - PDJNR2525M1504","description":"\u003cdiv\u003e\n\u003cp\u003ePrecision turning tool holder engineered specifically for DNMG1504 inserts. Built for machinists and workshops that demand repeatable accuracy and reliable clamping in turning operations.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e93° orientation\u003c\/b\u003e: Optimized geometry for DNMG1504 inserts to improve chip flow, rigidity, and surface finish during turning passes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePin Lock clamping\u003c\/b\u003e: Secure insert retention with a dedicated pin-lock mechanism that minimizes movement under cutting loads for consistent tool geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDNMG1504 compatibility\u003c\/b\u003e: Precisely sized to seat and align DNMG1504 inserts, ensuring stable seating and repeatable results across operations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRobust, precision-made body\u003c\/b\u003e: Built to resist deflection and wear in demanding turning tasks, promoting long-term accuracy and reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEfficient setup\u003c\/b\u003e: Designed to streamline tool changes and reduce setup time when paired with standard clamping components used in turning assemblies.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nFor quick setup and reliable accessory options, explore these components:\n\u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/VHX0825\"\u003e\u003cbutton class=\"button\"\u003eClamping Screw\u003c\/button\u003e\u003c\/a\u003e\n\u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/PD15318\"\u003e\u003cbutton class=\"button\"\u003eShim\u003c\/button\u003e\u003c\/a\u003e\n\u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/S3\"\u003e\u003cbutton class=\"button\"\u003eWrench\u003c\/button\u003e\u003c\/a\u003e\n\u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/LV4B\"\u003e\u003cbutton class=\"button\"\u003eLever\u003c\/button\u003e\u003c\/a\u003e\n\u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/SP4\"\u003e\u003cbutton class=\"button\"\u003eShim Pin\u003c\/button\u003e\u003c\/a\u003e\n\u003c\/p\u003e \u003cp\u003e\nThe Vortex Turning Tool Holder Pin Lock delivers tangible benefits in everyday turning tasks. The 93° setup aligns with DNMG1504 inserts to maximize rigidity and control, translating to tighter tolerances and smoother finishing passes. The Pin Lock mechanism reduces insert movement, which means you can push deeper into cuts with greater confidence and achieve consistent results from part to part. This is especially valuable in high-precision applications such as aerospace components, automotive housings, and precision-engineered mechanical parts. By minimizing insert migration and chatter, you’ll experience steadier tool life and fewer reworks—helping your shop hit production targets with less downtime. \u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":40288581517390,"sku":"PRO1600032","price":25.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/pdjnr-2_d3d9a62e-cd77-4e7c-a31e-0b663fa159ff.png?v=1695999678"},{"product_id":"pro1600033","title":"Vortex Turning Tool Holder Pin Lock 93 DEG - For DNMG1506 Inserts - PDJNR2020K1506","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Vortex Turning Tool Holder PDJNR2020K1506 is a precision solution designed for turning operations that use DNMG1506 inserts. Built for reliability and repeatable accuracy, it’s ideal for machinists who demand consistent tool seating and robust performance in demanding turning tasks.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e93° orientation\u003c\/b\u003e: Optimized cutting angle tailored for DNMG1506 inserts to improve chip control and surface finish during turning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePin Lock mechanism\u003c\/b\u003e: Positive retention that securely clamps the insert, minimizing vibration and maintaining precise alignment under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDNMG1506 insert compatibility\u003c\/b\u003e: Specifically engineered to seat and position DNMG1506 inserts for reliable seating and consistent tooling geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePDJNR turning tool holder series\u003c\/b\u003e: Part of a trusted family designed to deliver precision machining with repeatable results over long service life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRigid construction\u003c\/b\u003e: High-strength body crafted to resist wear and hold tight tolerances through numerous cycles and materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEasy integration with standard accessories\u003c\/b\u003e: Works seamlessly with common clamping components to streamline setup and tool changes.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nTo complete your setup, you can pair the holder with compatible components for secure, fast changes and precise control. Explore the available options:\n\u003cbr\u003e\n\u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/VHX0825\"\u003e\u003cbutton class=\"button\"\u003eClamping Screw\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/PD15318\"\u003e\u003cbutton class=\"button\"\u003eShim\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/S3\"\u003e\u003cbutton class=\"button\"\u003eWrench\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/LV4B\"\u003e\u003cbutton class=\"button\"\u003eLever\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/SP4\"\u003e\u003cbutton class=\"button\"\u003eShim Pin\u003c\/button\u003e\u003c\/a\u003e\n\u003c\/p\u003e \u003cp\u003e\nThis tool holder is crafted to deliver tangible benefits in real-world turning applications: stable insert positioning reduces chatter, consistent geometry supports predictable tool life, and the streamlined setup minimizes downtime between jobs. Whether you’re production-turning small batches or engineering prototypes, the PDJNR2020K1506 helps you achieve repeatable results with DNMG1506 inserts, every time.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":40288581550158,"sku":"PRO1600033","price":24.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/pdjnr-2_f6911f83-115e-4893-aeec-b6a85d9cdc2c.png?v=1695999682"},{"product_id":"pro1600034","title":"Vortex Turning Tool Holder Pin Lock 93 DEG - For DNMG1506 Inserts - PDJNR2525M1506","description":"\u003cdiv\u003e\n\u003cp\u003e\nPDJNR2525M1506 Vortex Turning Tool Holder with Pin Lock is a precision tool holder designed for DNMG1506 inserts. Built for turning operations in professional machining, it delivers secure insert seating and reliable clamping for consistent results.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e93° orientation\u003c\/b\u003e: Optimized for DNMG1506 inserts to provide a precise cutting geometry in turning applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePin Lock clamping\u003c\/b\u003e: Positive engagement that ensures secure seating and repeatable insert alignment during machining.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDNMG1506 insert compatibility\u003c\/b\u003e: Specifically engineered to accommodate the DNMG1506 insert form for reliable performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePDJNR series design\u003c\/b\u003e: Part of the PDJNR family, offering a standardized interface for dependable interchangeability with your tooling setup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRigid, precise interface\u003c\/b\u003e: Engineered tolerances minimize runout and promote a stable cut for consistent surface finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEfficient setup\u003c\/b\u003e: Designed for quick, secure insert changes to reduce downtime during production runs.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis tool holder delivers dependable performance for turning tasks where insert position and clamping reliability matter most. By maintaining secure seating and precise alignment, you can achieve repeatable dimensions and better surface quality across finishes and roughing passes. It’s an ideal choice for professional shops and job environments that prioritize accuracy, durability, and efficiency in DNMG1506 turning applications.\n\u003c\/p\u003e Related accessories to complete your setup:\n\u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/VHX0825\"\u003e\u003cbutton class=\"button\"\u003eClamping Screw\u003c\/button\u003e\u003c\/a\u003e\n\u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/PD15318\"\u003e\u003cbutton class=\"button\"\u003eShim\u003c\/button\u003e\u003c\/a\u003e\n\u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/S3\"\u003e\u003cbutton class=\"button\"\u003eWrench\u003c\/button\u003e\u003c\/a\u003e\n\u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/LV4B\"\u003e\u003cbutton class=\"button\"\u003eLever\u003c\/button\u003e\u003c\/a\u003e\n\u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/SP4\"\u003e\u003cbutton class=\"button\"\u003eShim Pin\u003c\/button\u003e\u003c\/a\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":40288581582926,"sku":"PRO1600034","price":25.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/pdjnr-2_6b3cee17-37e8-47d8-84c9-c50c83b81558.png?v=1695999685"},{"product_id":"pro1600043","title":"Vortex Turning Tool Holder Double Clamp 93 DEG - DNMG1104 Inserts - DDJNR2020K11","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Vortex Turning Tool Holder in the DDJNR2020K11 family is a precision mounting solution designed for DNMG1104 inserts. With a 93-degree orientation and a robust double clamp system, it delivers dependable insert seating and repeatable turning results.\n\u003c\/p\u003e \u003cdiv class=\"button-container\"\u003e\n\u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/DM0520\"\u003e\u003cbutton class=\"button\"\u003eClamping Screw\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/MD1103\"\u003e\u003cbutton class=\"button\"\u003eShim\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/S3\"\u003e\u003cbutton class=\"button\"\u003eWrench\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/DCL2211\"\u003e\u003cbutton class=\"button\"\u003eClamp\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/DSP0510\"\u003e\u003cbutton class=\"button\"\u003eAnvil Screw\u003c\/button\u003e\u003c\/a\u003e\n\u003c\/div\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e93° orientation\u003c\/b\u003e: Optimizes cutting angle for turning operations, helping achieve consistent chip formation and dimensional accuracy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDouble Clamp mechanism\u003c\/b\u003e: Provides secure insert positioning with improved rigidity and reduced runout during high-speed turning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDNMG1104 insert compatibility\u003c\/b\u003e: Specifically engineered to seat DNMG1104 geometry with reliable alignment in the DDJNR2020K11 configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDDJNR2020K11 series\u003c\/b\u003e: Part of a proven DDJNR family, delivering solid rigidity and repeatable performance in demanding turning tasks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable, precision-ground body\u003c\/b\u003e: Built to withstand repeated tool changes and heavy machining without loss of accuracy.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis tool holder is ideal for machinists and shops seeking dependable insert security, tight tolerances, and a straightforward setup for turning steel, stainless steel, and hard alloys. The combination of a 93-degree approach and the double clamp design minimizes insert movement, reduces chatter, and supports consistent finish quality across roughing and finishing passes. For best results, pair with compatible clamping accessories and ensure proper seating before starting the cut, leveraging the included clamping components to maintain stability throughout production runs.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":40288581943374,"sku":"PRO1600043","price":17.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/ddjnr-1_05552ddd-43bd-4088-83ac-785fc08a318d.png?v=1695999720"},{"product_id":"pro1600044","title":"Vortex Turning Tool Holder Double Clamp 93 DEG - DNMG1104 Inserts - DDJNR2525M11","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Vortex Turning Tool Holder with a 93-degree orientation is engineered for DNMG1104 inserts, delivering precise, repeatable results in turning operations. Designed for machinists who demand reliability and consistent finishes, this double-clamp holder keeps inserts secure and aligned throughout demanding machining tasks.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e93° orientation\u003c\/b\u003e: Optimized for DNMG1104 inserts to promote efficient chip control and superior surface finish in turning applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDouble clamp mechanism\u003c\/b\u003e: A two-point clamp provides enhanced rigidity, reducing insert movement and minimizing chatter under heavy cutting loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDNMG1104 insert compatibility\u003c\/b\u003e: Specifically sized to seat DNMG1104 inserts securely, ensuring dependable seating and repeatable alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRigid, precision-machined body\u003c\/b\u003e: Built for stability with tight tolerances to deliver consistent performance across multiple passes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEasy insert changes\u003c\/b\u003e: Quick, straightforward indexing and seating minimize downtime during tool changes and setup.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis tool holder helps you achieve tight diameters, cleaner finishes, and reliable performance across roughing and finishing passes. The 93-degree geometry, combined with the double-clamp design, maintains insert position under load, reduces vibration, and extends tool life in demanding turning scenarios on various materials. For shops upgrading their turning operations, it offers dependable bite, repeatable results, and straightforward workholding compatibility.\n\u003c\/p\u003e \u003cdiv class=\"button-container\"\u003e\n\u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/DM0520\"\u003e\u003cbutton class=\"button\"\u003eClamping Screw\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/MD1103\"\u003e\u003cbutton class=\"button\"\u003eShim\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/S3\"\u003e\u003cbutton class=\"button\"\u003eWrench\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/DCL2211\"\u003e\u003cbutton class=\"button\"\u003eClamp\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/DSP0510\"\u003e\u003cbutton class=\"button\"\u003eAnvil Screw\u003c\/button\u003e\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":40288581976142,"sku":"PRO1600044","price":19.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/ddjnr-1_5e63a204-5369-49b9-bd0e-f9b2c8bebe57.png?v=1695999723"},{"product_id":"pro1600045","title":"Vortex Turning Tool Holder Double Clamp 93 DEG - DNMG1506 Inserts - DDJNR2020K1506","description":"\u003cdiv\u003e\n\u003cp\u003eThe Vortex Turning Tool Holder Double Clamp 93 DEG for DNMG1506 inserts (DDJNR2020K1506) is engineered for precision turning, delivering secure insert seating and reliable clamping in demanding CNC operations. Designed for machinists who expect repeatable accuracy, this holder helps you achieve consistent part quality with each pass.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e93-Degree orientation\u003c\/b\u003e: Optimized geometry for DNMG inserts to improve cutting efficiency, chip control, and surface finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDouble clamp design\u003c\/b\u003e: Robust clamping system that minimizes insert movement under load for greater stability in roughing and finishing passes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDNMG1506 compatibility\u003c\/b\u003e: Precisely matched to DNMG1506 insert geometry to ensure secure seating and reliable retention.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDDJNR2020K1506 designation\u003c\/b\u003e: Clear, industry-standard code to streamline setup, inventory, and compatibility checks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable construction\u003c\/b\u003e: Built to withstand vibration and heavy cutting forces, maintaining alignment across long production runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEasy insert changes\u003c\/b\u003e: Intuitive clamp-release action reduces downtime and speeds tool changes without sacrificing accuracy.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eIn practical use, this tool holder helps you maintain tight tolerances and repeatable results across numerous parts. The 93-degree orientation supports efficient chip evacuation and stable cutting, making it suitable for profiling, grooving, and finishing tasks. The double clamp minimizes chatter and insert slippage, delivering smoother surfaces and longer insert life. With its DDJNR2020K1506 configuration, setup is straightforward, enabling faster changeovers and consistent performance from run to run.\u003c\/p\u003e \u003cp\u003eRelated tools to complete your setup: \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/DM0625\"\u003e\u003cbutton class=\"button\"\u003eClamping Screw\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/MD1504\"\u003e\u003cbutton class=\"button\"\u003eShim\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/S4\"\u003e\u003cbutton class=\"button\"\u003eWrench\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/DCL2612\"\u003e\u003cbutton class=\"button\"\u003eClamp\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/DSP0612\"\u003e\u003cbutton class=\"button\"\u003eAnvil Screw\u003c\/button\u003e\u003c\/a\u003e\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":40288582008910,"sku":"PRO1600045","price":17.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/ddjnr-1_80fbd6ee-17f2-4b0d-b592-73fe11d843a8.png?v=1695999727"},{"product_id":"pro1600046","title":"Vortex Turning Tool Holder Double Clamp 93 DEG - DNMG1506 Inserts - DDJNR2525M1506","description":"\u003cdiv\u003e\n\u003cp\u003eThe Vortex Turning Tool Holder Double Clamp, 93° orientation, is engineered for turning applications that require DNMG1506 inserts. Built for professional shops and precision work, it delivers secure insert seating and reliable clamping to help you achieve consistent, high-quality results.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e93° orientation\u003c\/b\u003e: Optimizes insert geometry for DNMG1506 applications, promoting efficient cutting and clean finishes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDouble Clamp mechanism\u003c\/b\u003e: Ensures secure positioning of the DNMG1506 insert, reducing movement under load for tighter tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDDJNR2525M1506 compatibility\u003c\/b\u003e: Specifically designed to accommodate DNMG1506 inserts with this interface for reliable seating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRobust construction\u003c\/b\u003e: Built to resist turning forces while maintaining precise alignment across operations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eQuick insert changes\u003c\/b\u003e: Enables efficient tool setup and consistent clamping integrity during routine changeovers.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eThis setup translates to improved dimensional accuracy, better surface finishes, and more predictable tool life in demanding turning tasks such as small-diameter shafts and precision components. The combination of 93° orientation and a secure double-clamp system minimizes chatter and keeps tolerances tight run after run.\u003c\/p\u003e \u003cp\u003eAccessory options to complete your setup:\u003c\/p\u003e\n\u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/DM0625\"\u003e\u003cbutton class=\"button\"\u003eClamping Screw\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/MD1504\"\u003e\u003cbutton class=\"button\"\u003eShim\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/S4\"\u003e\u003cbutton class=\"button\"\u003eWrench\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/DCL2612\"\u003e\u003cbutton class=\"button\"\u003eClamp\u003c\/button\u003e\u003c\/a\u003e \u003ca href=\"https:\/\/www.protool-ltd.co.uk\/products\/DSP0612\"\u003e\u003cbutton class=\"button\"\u003eAnvil Screw\u003c\/button\u003e\u003c\/a\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":40288582041678,"sku":"PRO1600046","price":19.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/ddjnr-1_64da4216-2827-4f41-bc1c-0d089051dab3.png?v=1695999730"},{"product_id":"pro1600053","title":"Vortex Turning Tool Holder Double Clamp with Through Coolant 93 DEG - DNMG1506 Inserts - DDJNR2020X15P","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Vortex Turning Tool Holder with a Double Clamp and Through Coolant delivers stable, high-precision turning performance for DNMG1506 inserts. Its 93° geometry is engineered for clean, efficient cutting on lathes and CNC machines, helping you achieve consistent finishes work after work.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e93° geometry\u003c\/b\u003e: Optimized turning angle for improved reach, clearance, and chip flow during precision cutting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDouble clamp insert holder\u003c\/b\u003e: Two rigid clamps securely lock the DNMG1506 insert to minimize movement and chatter under load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThrough coolant capability\u003c\/b\u003e: Coolant channels deliver cooling fluid directly to the cutting edge, reducing heat buildup and extending tool life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDNMG1506 insert compatibility\u003c\/b\u003e: Specifically designed to accommodate standard DNMG1506 inserts for reliable seating and precise alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRigid, dependable construction\u003c\/b\u003e: Built to maintain dimensional accuracy and withstand demanding machining conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEase of maintenance\u003c\/b\u003e: Secure insert retention plus straightforward replacement supports efficient setup and downtime reduction.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis tool holder is ideal for operators seeking consistent performance in turning operations, including facing, contouring, and shoulder cuts. By combining secure insert clamping with effective heat management, it helps you achieve repeatable tolerances, better surface finishes, and longer tool life—while leveraging readily available DNMG1506 inserts to keep tooling costs predictable.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":40288582271054,"sku":"PRO1600053","price":193.57,"currency_code":"GBP","in_stock":true}]},{"product_id":"pro1600054","title":"Vortex Turning Tool Holder Double Clamp with Through Coolant 93 DEG - DNMG1506 Inserts - DDJNR2525X15P","description":"\u003cdiv\u003e\n\u003cp\u003eThe Vortex Turning Tool Holder is a precision solution crafted for CNC turning tasks, designed for machinists who demand stable inserts, efficient heat management, and reliable performance. It accommodates DNMG1506 inserts with a 93° geometry and through-coolant flow to enhance cutting efficiency and tool life.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eThrough-Coolant Design\u003c\/b\u003e: Delivers coolant directly through the holder to the insert, improving heat removal and helping extend insert life during high-speed turning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDouble Clamp Mechanism\u003c\/b\u003e: Two-point clamping securely locks the DNMG1506 insert, reducing movement and improving rigidity under heavy cutting loads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e93° Turning Geometry\u003c\/b\u003e: Optimized angle for stable engagement on external profiles, supporting accurate finishes and consistent tolerances.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInsert Compatibility\u003c\/b\u003e: Specifically engineered for DNMG1506 inserts and aligned with the DDJNR2525X15P holder configuration for reliable interchangeability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVersatile Application\u003c\/b\u003e: Ideal for precision turning, facing, and contouring tasks on CNC lathes that require repeatable performance and clean surface finishes.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eBy combining through-coolant cooling with a secure double-clamp system and a purpose-built 93° geometry, this tool holder minimizes insert movement, manages heat effectively, and delivers consistent surface finishes across long runs. The design supports higher uptime, easier maintenance, and predictable results when working with DNMG1506 inserts, making it a dependable choice for precision manufacturing environments.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":40288582303822,"sku":"PRO1600054","price":200.02,"currency_code":"GBP","in_stock":true}]},{"product_id":"om12023","title":"Omega Products Turning Tool Holder - Double Clamp 93 Deg Right Hand - For DNMG 1104 Inserts - DDJNR1616H11","description":"\u003cdiv\u003e\n\u003cp\u003e\nDesigned for precision turning, the Omega Products Turning Tool Holder with Double Clamp delivers stable, repeatable cuts for operators using DNMG 1104 inserts. Its 93-degree right-hand geometry ensures efficient engagement across a range of materials, while the dual-clamp system enhances rigidity for consistent performance.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCompatibility\u003c\/b\u003e: specifically sized for DNMG 1104 inserts to ensure reliable seating and repeatable performance\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGeometry\u003c\/b\u003e: 93-degree right-hand turning angle optimized for smooth engagement and effective chip control\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamp System\u003c\/b\u003e: double clamp mechanism provides added rigidity to minimize deflection and vibration\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApplication\u003c\/b\u003e: tailored for right-hand turning operations in various machining tasks\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart Number\u003c\/b\u003e: DDJNR1616H11 for easy identification and procurement\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurability\u003c\/b\u003e: engineered for long-lasting performance with precise, steady cutting across demanding jobs\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis tool holder helps machinists achieve cleaner finishes and longer tool life by reducing chatter and maintaining consistent depth of cut. The combination of DNMG 1104 insert compatibility, the 93-degree right-hand geometry, and the robust double-clamp design translates to more predictable results, higher productivity, and fewer adjustments during production runs. Ideal for engineers and shop floor technicians seeking dependable turning performance in everyday machining tasks.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Omega","offers":[{"title":"Default Title","offer_id":41189012340814,"sku":"OM12023","price":45.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/OM12023_35d339da-de21-40fb-8ae7-0e2ef6994ebe.png?v=1714144223"},{"product_id":"om12024","title":"Omega Products Turning Tool Holder - Double Clamp 93 Deg Left Hand - For DNMG 1104 Inserts - DDJNL1616H11","description":"\u003cdiv\u003e\n\u003cp\u003e\nOmega's Turning Tool Holder with Double Clamp is engineered for machinists and engineers who demand consistent, high-quality results when turning with DNMG 1104 inserts. Its 93-degree geometry is optimized for efficient cutting and reliable chip control across a range of materials.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDouble clamp design\u003c\/b\u003e: Two clamp surfaces securely lock the DNMG 1104 insert, reducing movement and vibration for stable, repeatable cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e93° turning geometry\u003c\/b\u003e: Precisely angled for efficient engagement, helping you achieve clean finishes and predictable tool life in turning operations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDNMG 1104 insert optimization\u003c\/b\u003e: Specifically engineered to seat and align DNMG 1104 inserts for dependable seating and performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable, precise construction\u003c\/b\u003e: Built to withstand demanding machining tasks while maintaining tight tolerances for reliable alignment over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEasy setup and reliable seating\u003c\/b\u003e: Precision-machined interfaces enable quick tool changes with minimal adjustment, delivering fast setup in busy shops.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis tool holder translates stability into real-world benefits: reduced chatter leads to smoother surfaces, tighter dimensional control, and extended insert life. It’s well-suited for production environments and workshop turnings where consistent results and minimal downtime matter, delivering dependable performance across a variety of materials and turning conditions.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Omega","offers":[{"title":"Default Title","offer_id":41189012668494,"sku":"OM12024","price":45.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/OM12023_5dfc13d8-308c-4490-94e4-4f8200277cdb.png?v=1714144228"},{"product_id":"om12025","title":"Omega Products Turning Tool Holder - Double Clamp 93 Deg Right Hand - For DNMG 1104 Inserts - DDJNR2020K12","description":"\u003cdiv\u003e\n\u003cp\u003eThe Omega Products Turning Tool Holder with Double Clamp is engineered for precise turning tasks using DNMG 1104 inserts. With a 93-degree, right-hand geometry, it delivers efficient cutting and reliable results across a range of turning applications.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAngle and Hand\u003c\/b\u003e: 93-degree right-hand turning tool holder designed for efficient chip evacuation and stable cutting progression.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInsert Compatibility\u003c\/b\u003e: Optimized for DNMG 1104 inserts, ensuring consistent seating and predictable wear characteristics.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDouble Clamp Mechanism\u003c\/b\u003e: Dual-clamp design provides enhanced rigidity, reducing vibration and improving surface finish.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eModel and Code\u003c\/b\u003e: Part number DDJNR2020K12 for clear identification and replacement tracking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable Construction\u003c\/b\u003e: Built for durability and precision to withstand demanding turning operations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEasy Setup\u003c\/b\u003e: Straightforward alignment and secure seating to minimize setup time per job.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eWith the double clamp securing DNMG 1104 inserts, users experience steadier cuts, reduced chatter, and tighter tolerances. The 93-degree angle optimizes engagement on outer-diameter turning tasks, extending insert life and delivering consistent finishes on a range of materials. This tool holder is ideal for engineers and machinists seeking repeatable performance in high-demand turning operations, from prototype runs to production batches. Its robust construction supports long service intervals, while straightforward maintenance keeps downtime to a minimum.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Omega","offers":[{"title":"Default Title","offer_id":41189012963406,"sku":"OM12025","price":47.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/OM12023_adf15f48-dcd2-4b2b-b4e9-fa8cf671985d.png?v=1714144231"},{"product_id":"om12026","title":"Omega Products Turning Tool Holder - Double Clamp 93 Deg Left Hand - For DNMG 1104 Inserts - DDJNL2020K12","description":"\u003cdiv\u003e\n\u003cp\u003eThe Omega Products Turning Tool Holder with Double Clamp is engineered for turning tasks using DNMG 1104 inserts. Its 93° left-hand geometry provides precise, dependable performance for machinists and engineers who demand repeatable results in demanding turning operations.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eLeft-hand 93° geometry\u003c\/b\u003e: Optimized orientation for DNMG 1104 inserts to improve cutting alignment and chip flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDouble clamp mechanism\u003c\/b\u003e: Enhances insert stability, reducing tool chatter and vibration during heavy or high-precision cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDNMG 1104 insert compatibility\u003c\/b\u003e: Specifically designed to securely seat DNMG 1104 inserts for reliable seating and indexing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable construction\u003c\/b\u003e: Built for rigidity in high-load turning applications to maintain accuracy over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eModel\/part reference\u003c\/b\u003e: DDJNL2020K12 for precise identification and compatibility tracking.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eWith this tool holder, you can expect smoother turning, longer insert life due to reduced vibration, and tighter dimensional control across a range of materials. The dual-clamp design minimizes tool movement, delivering consistent surface finishes and better repeatability in production runs. Ideal for CNC lathes and manual turning setups where dependable performance and precise results matter most.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Omega","offers":[{"title":"Default Title","offer_id":41189013258318,"sku":"OM12026","price":47.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/OM12023_ab0a76da-4e73-4ac5-a67f-3ab1b48686a7.png?v=1714144234"},{"product_id":"om12027","title":"Omega Products Turning Tool Holder - Double Clamp 93 Deg Right Hand - For DNMG 1104 Inserts - DDJNR2525M11","description":"\u003cdiv\u003e\n\u003cp\u003eThe Omega Products Turning Tool Holder with Double Clamp is a precision component designed for machinists and engineers performing turning tasks. Engineered to pair with DNMG 1104 inserts, it delivers stable, repeatable cuts with a 93-degree right-hand geometry for versatile performance.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eOrientation\u003c\/b\u003e: 93° right-hand turning geometry tailored for efficient cutting and predictable chip flow in turning operations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDouble clamp seating\u003c\/b\u003e: two-point clamping keeps the DNMG 1104 insert firmly in place, reducing vibration and improving finish quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInsert compatibility\u003c\/b\u003e: optimized for DNMG 1104 inserts to maximize edge life and consistent performance during demanding cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart number\u003c\/b\u003e: DDJNR2525M11 ensures precise ordering and reliable interchange in your toolkit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable construction\u003c\/b\u003e: built to endure rigorous machining tasks, delivering dependable response under heavy use.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eThe double clamp design minimizes tool chatter, enabling smoother finishes and tighter tolerances even when facing challenging materials. The 93-degree right-hand configuration enhances cutting efficiency and chip control across a range of workpieces, reducing tool wear and downtime. With its robust build and targeted insert optimization, this tool holder helps you achieve repeatable results, project after project, without frequent tool changes.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Omega","offers":[{"title":"Default Title","offer_id":41189013487694,"sku":"OM12027","price":51.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/OM12023_f872a8fd-9ee0-400d-b402-429915e7b0fc.png?v=1714144238"},{"product_id":"om12028","title":"Omega Products Turning Tool Holder - Double Clamp 93 Deg Left Hand - For DNMG 1104 Inserts - DDJNL2525M11","description":"\u003cdiv\u003e\n\u003cp\u003eThe Omega Products Turning Tool Holder with Double Clamp is engineered for precision turning tasks, delivering stable, accurate cuts when using DNMG 1104 inserts. Designed for left-handed 93° turning setups, it helps machinists achieve consistent results across a range of materials.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eLeft-Hand 93° turning geometry\u003c\/b\u003e: Optimized 93-degree angle for left-handed turning with DNMG 1104 inserts, promoting efficient cutting and chip flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDouble clamp design\u003c\/b\u003e: Two-point insert clamping provides enhanced stability, minimizes insert movement, and reduces vibration during demanding cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDNMG 1104 insert compatibility\u003c\/b\u003e: Precisely engineered to securely hold DNMG 1104 inserts for reliable, repeatable performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable construction\u003c\/b\u003e: Built to endure repetitive turning operations with consistent rigidity and long tool life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eModel\/part number\u003c\/b\u003e: DDJNL2525M11 for clear identification and easy integration into existing Omega tooling setups.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eWith the double-clamp system and a dedicated 93° left-handed geometry, this tool holder minimizes chatter and seating errors, delivering straighter finishes and longer insert life. It simplifies setup for turning operations, reduces downtime, and provides predictable, repeatable results whether you're prototyping a part or running high-volume production. Ideal for engineers and machinists who demand dependable performance in metalworking tasks across a variety of materials.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Omega","offers":[{"title":"Default Title","offer_id":41189013782606,"sku":"OM12028","price":51.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/OM12023_cb38625d-c0e5-46eb-920d-41d31f57e087.png?v=1714144242"},{"product_id":"om12029","title":"Omega Products Turning Tool Holder - Double Clamp 93 Deg Right Hand - For DNMG 1506 Inserts - DDJNR2020K15-06","description":"\u003cdiv\u003e\n\u003cp\u003e\nMeet the Omega Products Turning Tool Holder with Double Clamp—built for DNMG 1506 inserts and right-hand turning applications. This precision holder delivers reliable rigidity and consistent performance for demanding machining tasks.\n\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/omega.png?v=1657700908\"\u003e\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePart number\u003c\/b\u003e: DDJNR2020K15-06\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAngle and orientation\u003c\/b\u003e: 93° right-hand turning tool holder designed to optimize cutting geometry\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDouble clamp mechanism\u003c\/b\u003e: two-point clamping for enhanced stability and reduced insert vibration\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInsert compatibility\u003c\/b\u003e: specifically engineered for DNMG 1506 inserts to ensure secure seating and repeatable accuracy\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable construction\u003c\/b\u003e: precision-built body from high-quality tooling material for long-lasting performance in turning operations\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis tool holder is engineered to minimize tool chatter and deliver smooth finishes across a range of materials. The double clamp design locks the insert firmly, helping maintain precise geometry during high-load cuts and extending insert life. With its 93-degree right-hand configuration, it supports efficient, repeatable turning tasks on CNC lathes and manual machines alike.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Omega","offers":[{"title":"Default Title","offer_id":41189014110286,"sku":"OM12029","price":47.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/OM12023_60dacde1-2357-49cf-b4ce-7534547b5ba0.png?v=1714144245"},{"product_id":"om12030","title":"Omega Products Turning Tool Holder - Double Clamp 93 Deg Left Hand - For DNMG 1506 Inserts - DDJNL2020K15-06","description":"\u003cdiv\u003e\n\u003cp\u003e\nOmega Products Turning Tool Holder with a 93° left-hand geometry and a robust double clamp is designed for DNMG 1506 inserts, delivering stable, precise turning performance for professional shops.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel\u003c\/b\u003e: DDJNL2020K15-06 — clearly identified within Omega’s tooling family for streamlined setup and inventory.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAngle and orientation\u003c\/b\u003e: 93° left-hand geometry optimized for efficient material removal and predictable chip flow across a range of materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDouble clamp system\u003c\/b\u003e: Two-point clamping secures the DNMG 1506 insert, reducing movement and vibration for consistent cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInsert compatibility\u003c\/b\u003e: Specifically engineered to accommodate DNMG 1506 inserts, supporting stable seating and repeatable performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable construction\u003c\/b\u003e: Rugged body with precision-ground interfaces to withstand demanding turning operations and heavy cutting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePrecision alignment\u003c\/b\u003e: Tight tolerances between holder and insert promote accurate tool paths and reliable depths of cut.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis tool holder empowers machinists to achieve tighter tolerances and smoother finishes by keeping the cutting edge firmly seated throughout each pass. The secure double-clamp design minimizes chatter, extends insert life, and reduces rework on challenging materials. Built for durability and precision, it supports aggressive feeds and depths of cut while maintaining stable performance, making it a dependable choice for turning tasks in job shops, contract manufacturers, and production environments.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Omega","offers":[{"title":"Default Title","offer_id":41189014208590,"sku":"OM12030","price":47.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/OM12023_c4605065-7e72-41cb-b896-ccc371906680.png?v=1714144250"},{"product_id":"om12031","title":"Omega Products Turning Tool Holder - Double Clamp 93 Deg Right Hand - For DNMG 1506 Inserts - DDJNR2525M15-06","description":"\u003cdiv\u003e\n\u003cp\u003eOmega Products' Turning Tool Holder with Double Clamp delivers precision turning performance for engineers and machinists working with DNMG 1506 inserts. Built for reliability in demanding turning tasks, it provides stable, consistent cuts with a 93-degree right-hand geometry.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAngle and orientation\u003c\/b\u003e: 93° right-hand turning tool holder optimized for efficient cutting and chip evacuation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDouble clamp system\u003c\/b\u003e: Dual-clamp design enhances insert seating, reducing deflection and vibration for repeatable finishes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInsert compatibility\u003c\/b\u003e: Specifically engineered for DNMG 1506 inserts to ensure secure, stable engagement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePart number\u003c\/b\u003e: DDJNR2525M15-06 for precise ordering and replacement alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable construction\u003c\/b\u003e: Built to withstand demanding turning operations with long-term tool life and reliable performance.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eThe double-clamp configuration translates to tighter tool control, enabling smoother feeds and cleaner surface finishes across a range of workpieces. The 93-degree geometry supports efficient engagement in tight pockets and helps maintain dimensional accuracy on every pass. With secure seating for DNMG 1506 inserts, setup time is reduced and insert life is extended through improved stability and reduced chatter. This holder is well-suited for job shops and precision machining environments, helping you achieve consistent toolpaths, reduced finishing steps, and predictable part quality.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Omega","offers":[{"title":"Default Title","offer_id":41189014339662,"sku":"OM12031","price":51.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/OM12023_7b036e28-4db4-42e3-8f90-4a4debbe84a4.png?v=1714144255"},{"product_id":"om12032","title":"Omega Products Turning Tool Holder - Double Clamp 93 Deg Left Hand - For DNMG 1506 Inserts - DDJNL2525M15-06","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Omega Products Turning Tool Holder with Double Clamp delivers reliable turning precision, built for machinists who demand stability when using DNMG 1506 inserts. Its 93-degree left-hand geometry supports clean, consistent cuts across a variety of materials.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePart Number\u003c\/b\u003e: DDJNL2525M15-06\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLeft-Hand 93° Geometry\u003c\/b\u003e: 93-degree left-hand orientation optimizes engagement and chip flow for efficient turning operations with DNMG 1506 inserts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDouble Clamp Mechanism\u003c\/b\u003e: Two-point clamp provides secure seating for the insert, reducing vibration and improving surface finish under demanding cutting conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInsert Compatibility\u003c\/b\u003e: Specifically designed to accept DNMG 1506 inserts, ensuring precise seating and repeatable results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable Construction\u003c\/b\u003e: Robust body with hardened clamp pockets and precision-ground interfaces for long-term stability in tough machining environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEase of Setup\u003c\/b\u003e: Quick insert installation and stable clamping streamline changeovers and minimize downtime in production runs.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis tool holder helps you achieve tighter tolerances and smoother finishes by minimizing tool chatter and movement during cutting. The double clamp design preserves insert geometry at higher feeds, extending insert life and reducing rework. With its sturdy construction and precise interfaces, you can rely on consistent tool behavior across multiple passes, making it well-suited to medium- to heavy-duty turning tasks on lathes and turning centers.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Omega","offers":[{"title":"Default Title","offer_id":41189014569038,"sku":"OM12032","price":51.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/OM12023_85fd2a02-c12d-48bc-b813-ec4451db7f1c.png?v=1714144258"},{"product_id":"om11244","title":"Omega Products Turning Tool Holder - Double Clamp 93 Deg Right Hand - For DNMG 1506 Inserts - DDJNR3232M15-06","description":"\u003cdiv\u003e\n\u003cp\u003eThe Omega Products Turning Tool Holder with Double Clamp delivers reliable, precise turning performance for machinists using DNMG 1506 inserts. Its 93-degree right-hand geometry and robust clamp system are designed for consistent cutting, smooth finishes, and repeatable results across a range of materials.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eDouble clamp design\u003c\/b\u003e: Securely locks the DNMG 1506 insert in place for maximum stability and reduced vibration during heavy turning passes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e93° right-hand geometry\u003c\/b\u003e: Optimized angle for right-hand turning to deliver clean, efficient chip flow and steady engagement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDNMG 1506 insert compatibility\u003c\/b\u003e: Specifically engineered to fit standard DNMG 1506 inserts for quick tool changes and reliable seating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRugged, precision-machined body\u003c\/b\u003e: Built to maintain alignment under demanding machining conditions, with tight tolerances for repeatable performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eModel designation DDJNR3232M15-06\u003c\/b\u003e: Clear clamping interface that aligns with your turning setup for consistent, predictable results.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eIn lathe turning tasks, this tool holder helps reduce chatter and improve surface finish by ensuring insert stability and accurate positioning. The dual-clamp system enhances insert life and enables more predictable results across roughing and finishing passes. With a compact, rigid design, it suits both prototyping work and high-volume production, making it a practical, dependable choice for engineers prioritizing consistency and value in their turning operations.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Omega","offers":[{"title":"Default Title","offer_id":41189014700110,"sku":"OM11244","price":73.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/OM12023_8653d613-60d9-4e08-a7ca-a7181df3c7bc.png?v=1714144262"},{"product_id":"om11245","title":"Omega Products Turning Tool Holder - Double Clamp 93 Deg Left Hand - For DNMG 1506 Inserts - DDJNL3232M15-06","description":"\u003cdiv\u003e\n\u003cp\u003eOmega Products Turning Tool Holder with Double Clamp delivers reliable turning performance at a 93-degree left-hand geometry, optimized for DNMG 1506 inserts. Built for engineers and machinists who value precision and consistency, this holder supports smoother cuts and stable tool engagement across a range of materials.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eLeft-Hand 93° Geometry\u003c\/b\u003e: Purpose-built angle that enhances cutting efficiency and chip flow for left-hand turning operations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDouble Clamp Mechanism\u003c\/b\u003e: Dual-lock clamping provides heightened rigidity, reducing vibration for a steadier, more accurate cut.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInsert Compatibility\u003c\/b\u003e: Optimized to securely receive DNMG 1506 inserts with a precise pocket fit and seating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable Construction\u003c\/b\u003e: Designed to withstand demanding turning tasks while maintaining repeatable accuracy over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eModel \u0026amp; Fit\u003c\/b\u003e: DDJNL3232M15-06 ensures compatibility with standard turning setups for quick tool changes and reliable performance.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eWith the double-clamp design and 93-degree left-hand geometry, users can expect improved surface finish, longer insert life, and reduced downtime due to tool movement. This tool holder is ideal for precision turning applications where stable engagement and consistent results matter, from prototype runs to high-volume production.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Omega","offers":[{"title":"Default Title","offer_id":41189014765646,"sku":"OM11245","price":73.9,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/OM12023_801ac9bb-9026-4608-a605-410327e99171.png?v=1714144266"},{"product_id":"om12033","title":"Omega Products Turning Tool Holder - Pin Lock 93 Deg Right Hand - For DNMG 1104 Inserts - PDJNR1616H11","description":"\u003cdiv\u003e\n\u003cp\u003eOmega's Turning Tool Holder with Pin Lock is engineered for turning tasks that demand precision and dependable insert retention. This right-hand tool holder features a 93-degree geometry and is designed for DNMG 1104 inserts, delivering consistent cuts across materials and conditions.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePin Lock retention\u003c\/b\u003e: Securely locks DNMG 1104 inserts to minimize movement and vibration for reliable tool life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRight-Hand, 93° geometry\u003c\/b\u003e: Optimizes approach angle, clearance, and cutting efficiency on turning operations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDNMG 1104 insert compatibility\u003c\/b\u003e: Supports standard DNMG 1104 inserts for versatile tooling across materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eModel \/ Part Code\u003c\/b\u003e: PDJNR1616H11 — precise specification for ordering and compatibility with Omega tooling ecosystems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable construction\u003c\/b\u003e: Built to resist wear and maintain accuracy under demanding machining conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEasy setup and alignment\u003c\/b\u003e: Designed for efficient clamping and reliable insert seating, reducing setup time.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eThe combination of secure pin-lock retention, a precise 93-degree right-hand geometry, and a robust build translates into tangible benefits: smoother finishes, tighter tolerances, and extended insert life. Whether you're turning shafts, shoulders, or faces on CNC lathes or manual turning centers, this holder helps you maintain consistent performance through heavy cuts and varied materials. It’s an ideal choice for engineers and machinists who value reliability, repeatability, and straightforward maintenance in demanding production environments.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Omega","offers":[{"title":"Default Title","offer_id":41189028626510,"sku":"OM12033","price":39.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/OM12033_3ba6ab43-d2b6-42f1-b211-6c27b98f7c85.png?v=1714144429"},{"product_id":"om12034","title":"Omega Products Turning Tool Holder - Pin Lock 93 Deg Left Hand - For DNMG 1104 Inserts - PDJNL1616H11","description":"\u003cdiv\u003e\n\u003cp\u003eThe Omega PDJNL1616H11 Turning Tool Holder with Pin Lock is engineered for precision turning tasks, optimized for DNMG 1104 inserts, and designed for a left-hand 93-degree cutting angle. This combination delivers stable, repeatable performance across a range of materials and applications.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePin Lock retention\u003c\/b\u003e: The integrated pin lock securely seats DNMG 1104 inserts, reducing insert movement and chatter during heavy cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e93° left-hand geometry\u003c\/b\u003e: Precisely engineered to optimize engagement on left-hand turning operations, promoting smooth cutting and consistent depths of cut.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDNMG 1104 insert compatibility\u003c\/b\u003e: Built to accommodate common DNMG 1104 inserts, providing broad tooling compatibility and cost-effective maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRobust, precision-ground body\u003c\/b\u003e: Constructed for long-term durability with tight tolerances that ensure consistent alignment and performance over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eModel\/part\u003c\/b\u003e: PDJNL1616H11 — designed for use with standard turning setups in lathes and CNC turning centers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSecure clamping interface\u003c\/b\u003e: The pin lock system delivers reliable insert retention with quick, tool-free changes when needed.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eWith this holder, you gain tighter tolerances, cleaner finishes, and extended tool life thanks to stable insert seating and reduced vibration. It supports efficient turning on conventional lathes and CNC turning centers, enabling repeatable results across steel, stainless, and aluminum workpieces. The PDJNL1616H11 design offers a practical, durable solution for engineers and machinists who demand dependable performance in demanding machining environments.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Omega","offers":[{"title":"Default Title","offer_id":41189028954190,"sku":"OM12034","price":39.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/OM12033_463bda8f-5652-4a29-9fe8-e10e68b5dccd.png?v=1714144433"},{"product_id":"om12035","title":"Omega Products Turning Tool Holder - Pin Lock 93 Deg Right Hand - For DNMG 1104 Inserts - PDJNR2020K11","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Omega Products Turning Tool Holder with Pin Lock is a precision solution designed for turning tasks that demand accuracy, stability, and repeatable results. Tailored for right-hand operation with a 93-degree angle and DNMG 1104 inserts, it delivers reliable performance across a variety of materials.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCompatibility\u003c\/b\u003e: Specifically designed to hold DNMG 1104 inserts, ensuring secure seating and consistent cutting performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePin Lock retention\u003c\/b\u003e: Robust pin lock mechanism provides positive tool retention, reducing tool chatter and enhancing stability during heavy-duty turning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRight-hand, 93° geometry\u003c\/b\u003e: 93-degree right-hand orientation optimizes chip flow and cutting action for efficient material removal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable construction\u003c\/b\u003e: Built for demanding machining environments, maintaining tight tolerances and long-term reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eModel \/ part number\u003c\/b\u003e: PDJNR2020K11 for straightforward identification and replacement in your tooling system.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis tool holder is ideal for engineers and machinists seeking dependable performance in turning operations. The secure retention and precise geometry help minimize vibration, produce cleaner finishes, and extend insert life, making it a practical choice for shop floors that value consistency and uptime when working with DNMG inserts.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Omega","offers":[{"title":"Default Title","offer_id":41189029281870,"sku":"OM12035","price":40.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/OM12033_30dab415-3ef6-4adb-9385-b5c82c9984da.png?v=1714144437"},{"product_id":"om12036","title":"Omega Products Turning Tool Holder - Pin Lock 93 Deg Left Hand - For DNMG 1104 Inserts - PDJNL2020K11","description":"\u003cdiv\u003e\n\u003cp\u003e\nOmega PDJNL2020K11 Turning Tool Holder with Pin Lock provides a precise, reliable platform for turning tasks using DNMG 1104 inserts. Designed to deliver consistent performance, it couples a secure pin-lock mechanism with a robust construction for durable, repeatable results.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eModel\u003c\/b\u003e: PDJNL2020K11\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInsertion compatibility\u003c\/b\u003e: Specifically designed for DNMG 1104 indexable inserts\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePin Lock retention\u003c\/b\u003e: Positive pin-lock system secures the insert, reducing movement and vibration during cuts\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting geometry\u003c\/b\u003e: 93-degree approach angle optimizes material removal and chip flow\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction\u003c\/b\u003e: Hardened steel body with precision seating surfaces for reliable alignment and long tool life\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMounting compatibility\u003c\/b\u003e: Suitable for standard turning centers and turret-style tool posts, enabling stable, efficient setup\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nIn practical use, this tool holder supports consistent diameters and surface finishes by maintaining insert position under load and minimizing chatter. The 93-degree geometry enhances cutting efficiency across a variety of materials, while the pin-lock system simplifies insert changes and sustains repeatable performance across multiple operations.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Omega","offers":[{"title":"Default Title","offer_id":41189029707854,"sku":"OM12036","price":40.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/OM12033_5301046a-3adb-476d-9a41-51f94cefe4ce.png?v=1714144440"},{"product_id":"om12037","title":"Omega Products Turning Tool Holder - Pin Lock 93 Deg Right Hand - For DNMG 1104 Inserts - PDJNR2525M11","description":"\u003cdiv\u003e\n\u003cp\u003eThe Omega Products Turning Tool Holder with Pin Lock is a precision right-hand tool holder designed for DNMG 1104 inserts. With a 93° geometry, it delivers stable, accurate turning across a wide range of materials.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eRight-hand 93° geometry\u003c\/b\u003e: Optimized for DNMG 1104 inserts, enabling efficient cutting and clean chip flow across materials.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePin Lock retention\u003c\/b\u003e: Secure insert retention minimizes movement and vibration for consistent finishes in demanding turning operations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDNMG 1104 insert compatibility\u003c\/b\u003e: Specifically designed to work with DNMG 1104 inserts for reliable seating and repeatable tool life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable, precision-crafted body\u003c\/b\u003e: Built to withstand the rigors of production turning with stable performance and long-term reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eModel\/code\u003c\/b\u003e: PDJNR2525M11 designation aids quick identification and seamless integration with CNC setups.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eUsing the Omega Turning Tool Holder with Pin Lock translates into steadier cuts, reduced vibration, and more predictable tool life. The secure pin lock and robust construction support reliable performance across metals such as steel and alloy workpieces, whether you’re performing roughing passes or precision finishing. The 93° right-hand geometry guides the insert for efficient chip evacuation and effective engagement, helping you achieve higher productivity and better surface quality in every job.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Omega","offers":[{"title":"Default Title","offer_id":41189029871694,"sku":"OM12037","price":44.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/OM12033_98e81190-c340-40b5-9ab1-1530da198b20.png?v=1714144444"},{"product_id":"om12038","title":"Omega Products Turning Tool Holder - Pin Lock 93 Deg Left Hand - For DNMG 1104 Inserts - PDJNL2525M11","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe Omega Products Turning Tool Holder with Pin Lock is a left-hand turning solution engineered for DNMG 1104 inserts, optimized for precise, repeatable cuts in a PDJNL2525M11 configuration. It combines secure retention with robust alignment to help machinists achieve consistent results in demanding tasks.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eLeft-Hand 93° Geometry\u003c\/b\u003e: Specialized 93-degree angle tailored for left-hand turning applications, delivering efficient material removal and smooth chip flow.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePin Lock Retention\u003c\/b\u003e: Secure pin-lock mechanism holds the insert firmly in place, reducing movement and vibration during heavy cuts for improved stability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDNMG 1104 Insert Compatibility\u003c\/b\u003e: Precisely shaped seating and interface designed to accommodate DNMG 1104 inserts for reliable seating and consistent tool geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable, Precision-Machined Construction\u003c\/b\u003e: Built with tight tolerances and rigid fabrication to maintain accuracy across multiple setups and extended use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEasy Install and Rebuild\u003c\/b\u003e: Quick insert changeover with straightforward alignment, minimizing downtime and helping you stay productive on the shop floor.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nIdeal for engineers and shop floor operators who need a dependable turning tool holder that delivers repeatable performance with DNMG 1104 inserts. The Pin Lock design minimizes insert shift and chatter, while the 93° left-hand geometry supports clean finishes and predictable tool life across diverse turning tasks.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Omega","offers":[{"title":"Default Title","offer_id":41189029969998,"sku":"OM12038","price":44.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/OM12033_3724ba8c-7463-4c50-af9f-7e5c5dac3828.png?v=1714144448"},{"product_id":"om12039","title":"Omega Products Turning Tool Holder - Pin Lock 93 Deg Right Hand - For DNMG 1506 Inserts - PDJNR2020K15-06","description":"\u003cdiv\u003e\n\u003cp\u003eThe Omega Products Turning Tool Holder with Pin Lock is engineered for DNMG 1506 inserts, delivering precision and versatility in turning tasks. Designed for right-hand operation with a 93-degree cutting angle, it enables stable, efficient cutting across a range of materials.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePin Lock Retention\u003c\/b\u003e: A dedicated pin-lock mechanism securely locks the insert, maintaining alignment during heavy cuts and reducing tool vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRight-Hand 93-Degree Geometry\u003c\/b\u003e: Optimized 93-degree angle for smooth entry, effective chip control, and steady cutting performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDNMG 1506 Insert Compatibility\u003c\/b\u003e: Specifically shaped to accommodate standard DNMG 1506 inserts for reliable seating and quick interchangeability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable Construction\u003c\/b\u003e: Built to withstand demanding turning operations while preserving precision and repeatability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePrecision Fit\u003c\/b\u003e: Tight tolerances ensure consistent seating and minimal runout for a clean, uniform surface finish.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eWith the pin-lock design and precise geometry, this turning tool holder delivers stable performance, reduces chatter, and supports consistent finishes across multiple passes. It’s a dependable choice for engineers and machinists performing routine to higher‑demand turning tasks, offering reliable insert retention and flexible, repeatable results.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Omega","offers":[{"title":"Default Title","offer_id":41189030101070,"sku":"OM12039","price":40.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/OM12033_f59680e6-6704-4a35-b6d4-9ea7e279ba79.png?v=1714144452"},{"product_id":"om12040","title":"Omega Products Turning Tool Holder - Pin Lock 93 Deg Left Hand - For DNMG 1506 Inserts - PDJNL2020K15-06","description":"\u003cdiv\u003e\n\u003cp\u003eThe Omega Products Turning Tool Holder with Pin Lock is built for precision turning with DNMG 1506 inserts. Designed for right-hand use at a 93-degree angle, it delivers stable, accurate cuts across a range of materials.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCompatibility with DNMG 1506 Inserts\u003c\/b\u003e: Precisely engineered to accept DNMG 1506 inserts for reliable seating and consistent alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePin Lock Retention\u003c\/b\u003e: Secure pin-lock mechanism minimizes insert movement under load for improved stability and repeatable results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRight-Hand, 93° Geometry\u003c\/b\u003e: Optimized angle for efficient engagement and smooth chip flow during turning operations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable, Precision-Crafted Body\u003c\/b\u003e: Built with tight tolerances and robust materials to withstand demanding machining and long-term use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eVersatile Material Compatibility\u003c\/b\u003e: Performs across a variety of common turning materials when used with DNMG inserts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEasy Setup and Reliable Maintenance\u003c\/b\u003e: Quick insert seating and dependable retention reduces setup time and maintenance needs.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eWith secure retention and a solid construction, this tool holder supports repeatable depths of cut, better surface finishes, and longer insert life. The pin-lock system dampens movement during heavy cutting, helping to minimize chatter and keep tolerances on target. The 93-degree right-hand orientation provides predictable engagement in tight turning applications, making it a dependable choice for everyday turning tasks in metalworking environments.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Omega","offers":[{"title":"Default Title","offer_id":41189030232142,"sku":"OM12040","price":40.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/OM12033_72fda7a8-ac11-404f-8fe7-3c2d30e071f6.png?v=1714144455"},{"product_id":"om12041","title":"Omega Products Turning Tool Holder - Pin Lock 93 Deg Right Hand - For DNMG 1506 Inserts - PDJNR2525M15-06","description":"\u003cdiv\u003e\n\u003cp\u003eThe Omega Turning Tool Holder with Pin Lock is a precision accessory designed for CNC turning tasks that use DNMG 1506 inserts. Built for right-hand operation with a 93-degree geometry, it delivers dependable, repeatable results across a range of materials.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eRight-Hand 93° geometry\u003c\/b\u003e: Optimized for efficient cutting angles and proper clearance in turning operations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePin Lock retention\u003c\/b\u003e: Secure pin-lock mechanism keeps inserts firmly in place, reducing chatter and improving stability under heavy cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDNMG 1506 insert compatibility\u003c\/b\u003e: Specifically engineered to accommodate standard DNMG 1506 carbide inserts for reliable tooling performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eRugged construction\u003c\/b\u003e: Built to endure demanding machining environments while preserving alignment accuracy over time.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePrecise alignment\u003c\/b\u003e: Ensures consistent bite and repeatable toolpaths across multiple passes.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eWith a secure pin-lock system and a robust 93-degree right-hand design, this tool holder minimizes vibration and delivers smooth, high-quality surface finishes. The DNMG 1506 insert compatibility means quicker tool changes and less downtime, so you can keep turning with minimal interruptions. Ideal for engineers and machinists seeking dependable performance in roughing, finishing, and general turning tasks on a variety of metals.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Omega","offers":[{"title":"Default Title","offer_id":41189030428750,"sku":"OM12041","price":44.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/OM12033_68c75db5-efb0-4abd-86a4-02858fb3753e.png?v=1714144460"},{"product_id":"om12042","title":"Omega Products Turning Tool Holder - Pin Lock 93 Deg Left Hand - For DNMG 1506 Inserts - PDJNL2525M15-06","description":"\u003cdiv\u003e\n\u003cp\u003eThe Omega PDJNL2525M15-06 Turning Tool Holder with Pin Lock is engineered for DNMG 1506 inserts, delivering precise left-handed turning at a 93-degree approach for versatile metalworking tasks.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003ePin Lock retention\u003c\/b\u003e: robust pin-lock mechanism securely holds DNMG inserts, minimizing tool chatter and improving stability during cuts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e93° left-hand geometry\u003c\/b\u003e: optimized 93-degree angle designed for efficient material removal and predictable chip flow in turning operations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDNMG 1506 insert compatibility\u003c\/b\u003e: specifically configured to fit standard DNMG 1506 inserts for reliable seating and repeatable results.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDurable construction\u003c\/b\u003e: precision-machined body built to withstand demanding machining environments and long tool life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003ePrecise seating and alignment\u003c\/b\u003e: tight tolerances maintain accurate insert position for consistent surface finish and dimensional control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eEasy integration\u003c\/b\u003e: designed to work with common turning setups, enabling straightforward setup and faster setup times.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eWith secure retention and a robust, purpose-built design, this tool holder helps you achieve smoother cuts, reduced vibration, and longer insert life. The left-hand, 93-degree configuration supports efficient material removal across a range of materials, delivering repeatable performance and reliable results in demanding turning tasks.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Omega","offers":[{"title":"Default Title","offer_id":41189030723662,"sku":"OM12042","price":44.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/OM12033_8577c5d1-c01d-4bb5-9393-e52e29934200.png?v=1714144463"},{"product_id":"pro1600524","title":"PDJNL1616-H11 Standard Turning Tool Holder, 16 x 16mm Shank, 100mm Long, Left Hand, 93 Degree Approach, Lever Lock, for DNMG11 inserts - PDJNR\/L Series (Vortex)","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe PDJNL1616-H11 is a robust standard turning tool holder designed for DNMG11 inserts, built with a solid steel shank for dependable performance in CNC turning. Featuring a left-hand configuration and a 93° approach, it delivers precise cutting and quick insert changes for busy machining environments.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cspan\u003eShank size\u003c\/span\u003e\u003c\/b\u003e: 16 x 16 mm, 100 mm long, left-hand configuration for compatible turning setups\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cspan\u003eClamp style\u003c\/span\u003e\u003c\/b\u003e: Lever-lock clamping for fast, secure insert changes with reduced downtime\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cspan\u003eApproach angle\u003c\/span\u003e\u003c\/b\u003e: 93° approach to optimize cutting geometry and chip flow\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cspan\u003eInsert compatibility\u003c\/span\u003e\u003c\/b\u003e: Designed for DNMG11 turning inserts\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cspan\u003eMaterial\u003c\/span\u003e\u003c\/b\u003e: Solid steel construction delivering rigidity and long-term durability\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003e\u003cspan\u003eSeries\u003c\/span\u003e\u003c\/b\u003e: PDJNR\/L Series (Vortex) for reliable, common machining applications\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nWith the lever-lock system, swapping DNMG11 inserts becomes quick and tool-free, keeping your workflow moving and minimizing setup time. The 100 mm shank length provides reach in tighter pockets while preserving stiffness for consistent tool life and smooth cutting action. The left-hand orientation suits a range of turning configurations, and the 93° approach helps maintain stable chip control and accurate engagement with each pass. Built to endure demanding machining, this tool holder is ideal for general turning tasks—from roughing to finishing—where reliability and precision matter most.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":43439090860110,"sku":"PRO1600524","price":59.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/PDJNR-L-93-Degree-Approach-Lever-Lock-Solid-Steel-Shank-Turning-Tool-for-DNMG-Inserts-TT-PDJNR-L-K-Series-Korloy-left_1_59.png?v=1770812400"},{"product_id":"pro1600525","title":"PDJNL2020-K11 Standard Turning Tool Holder, 20 x 20mm Shank, 125mm Long, Left Hand, 93 Degree Approach, Lever Lock, for DNMG11 inserts - PDJNR\/L Series (Vortex)","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe PDJNL2020-K11 Standard Turning Tool Holder is a robust left‑hand tool holder designed for DNMG11 inserts. With a 20 × 20 mm solid steel shank and a 125 mm working length, it delivers dependable rigidity and precise alignment for daily turning on lathes.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eShank size\u003c\/b\u003e: 20 × 20 mm for compatibility with standard tool blocks\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 125 mm to balance reach and rigidity\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOrientation\u003c\/b\u003e: Left‑hand configuration for optimal cutting direction\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApproach angle\u003c\/b\u003e: 93° to optimize insert engagement and chip flow\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamping system\u003c\/b\u003e: Lever lock for fast, secure insert changes\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInsert compatibility\u003c\/b\u003e: Designed for DNMG11 style turning inserts\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSeries\u003c\/b\u003e: PDJNR\/L Series (Vortex) for reliable, widely used tooling\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial\u003c\/b\u003e: Solid steel shank delivering stiffness and long‑term durability\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nEngineered for dependable performance, this tool holder minimizes runout and vibration, helping you achieve consistent cut quality and surface finishes. The lever lock clamping system enables quick insert swaps, reducing downtime during setups and tool changes. The 93° approach angle provides a stable cutting geometry for external turning and shoulder features, while the 125 mm length offers a practical reach for a wide range of turning tasks. Ideal for general turning on CNC lathes or manual machines, the PDJNL2020-K11 is a dependable choice for shops that rely on DNMG11 inserts and PDJNR\/L tooling.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":43439090991182,"sku":"PRO1600525","price":59.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/PDJNR-L-93-Degree-Approach-Lever-Lock-Solid-Steel-Shank-Turning-Tool-for-DNMG-Inserts-TT-PDJNR-L-K-Series-Korloy-left_1_59_7e9c120e-8cc5-460d-8c93-f42f9520b28b.png?v=1770812405"},{"product_id":"pro1600526","title":"PDJNL2020-K15 Standard Turning Tool Holder, 20 x 20mm Shank, 125mm Long, Left Hand, 93 Degree Approach, Lever Lock, for DNMG15 inserts - PDJNR\/L Series (Vortex)","description":"\u003cdiv\u003e\n\u003cp\u003eThe PDJNL2020-K15 is a rugged standard turning tool holder engineered for DNMG11 inserts, delivering reliable rigidity and easy setup on lathes and CNC turning centers. With a 20 x 20 mm square shank and a 125 mm reach, it’s designed for general turning work that demands consistent, repeatable performance.\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eShank size\u003c\/b\u003e: 20 x 20 mm square shank fits standard tool posts and blocks for drop-in compatibility\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 125 mm to reach deeper cutting areas while preserving rigidity\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eHandedness\u003c\/b\u003e: Left-hand configuration optimizes cut direction and chip flow for common turning operations\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApproach angle\u003c\/b\u003e: 93° turning geometry supports DNMG11 inserts with predictable engagement\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamping system\u003c\/b\u003e: Strong lever-lock design provides secure insert clamping with quick changeovers\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInsert compatibility\u003c\/b\u003e: Specifically designed for DNMG11 turning inserts for efficient tooling setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConstruction\u003c\/b\u003e: Solid steel shank delivers rigidity and longitudinal stiffness under load\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003eWith the PDJNL2020-K15, you gain precise control, reduced tool vibration, and faster tool changes thanks to the lever-lock clamp. The 93° approach and DNMG11 compatibility align with standard turning routines, helping you maintain tight tolerances on both roughing and finishing passes. The 125 mm reach and 20 x 20 mm shank provide a stable cutting platform for longer reach operations, while the durable steel body resists deflection, extending tool life and reducing replacement costs. Ideal for shops that perform general turning tasks on steel, cast iron, and alloy workpieces where dependable performance and quick setup matter most.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":43439091220558,"sku":"PRO1600526","price":30.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/PDJNR-L-93-Degree-Approach-Lever-Lock-Solid-Steel-Shank-Turning-Tool-for-DNMG-Inserts-TT-PDJNR-L-K-Series-Korloy-left_1_59_cd0acf85-77a1-4b28-9162-68569e3869ad.png?v=1770812410"},{"product_id":"pro1600527","title":"PDJNL2525-M11 Standard Turning Tool Holder, 25 x 25mm Shank, 150mm Long, Left Hand, 93 Degree Approach, Lever Lock, for DNMG11 inserts - PDJNR\/L Series (Vortex)","description":"\u003cdiv\u003e\n\u003cp\u003e\nMeet the PDJNL2525-M11 Standard Turning Tool Holder — a robust, left‑hand tool holder built for machinists who value reliability and quick insert changes. Designed for DNMG11 inserts, it combines a solid 25x25 mm shank with a 150 mm length and a lever‑lock clamp to deliver steady cutting and easy reindexing at a 93‑degree approach.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eShank size\u003c\/b\u003e: 25 x 25 mm solid steel shank for rigidity and precise alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 150 mm profile provides ample reach and stability during turning operations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLeft-hand orientation\u003c\/b\u003e: Left-hand setup with a 93° approach angle to suit common turning workflows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamping system\u003c\/b\u003e: Strong lever‑lock clamping for secure insert seating and quick changes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eInsert compatibility\u003c\/b\u003e: Specifically designed to hold DNMG11 inserts for reliable seating and consistent chip control.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eSeries\u003c\/b\u003e: PDJNR\/L Series (Vortex) — proven performance in general machining environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMaterial\u003c\/b\u003e: Solid steel construction ensures durability and rigidity under demanding cuts.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis tool holder is ideal for shops performing routine turning tasks where durability and efficiency matter. The lever‑lock system minimizes downtime by allowing fast, tool‑free insert changes, while the 93° approach angle delivers predictable engagement and improved chip flow. The combination of a rigid 25x25 mm shank and a 150 mm body supports stable cutting across a range of workpiece sizes, making it a dependable choice for external turning, facing, and finishing passes that use DNMG11 inserts.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":43439091482702,"sku":"PRO1600527","price":59.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/PDJNR-L-93-Degree-Approach-Lever-Lock-Solid-Steel-Shank-Turning-Tool-for-DNMG-Inserts-TT-PDJNR-L-K-Series-Korloy-left_1_59_552bccc8-4e59-4549-bcef-3d82d6491aa6.png?v=1770812415"},{"product_id":"pro1600528","title":"PDJNL2525-M15 Standard Turning Tool Holder, 25 x 25mm Shank, 150mm Long, Left Hand, 93 Degree Approach, Lever Lock, for DNMG15 inserts - PDJNR\/L Series (Vortex)","description":"\u003cdiv\u003e\n\u003cp\u003e\nThe PDJNL2525-M15 is a rugged turning tool holder with a 25 x 25 mm solid steel shank, built for precision and reliability in general turning tasks. Designed for left-handed cutting and a 93° approach, it ensures smooth, repeatable inserts performance with quick, secure changeovers.\n\u003c\/p\u003e \u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eShank size\u003c\/b\u003e: 25 x 25 mm solid steel shank for rigidity and stability during heavy cutting\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 150 mm, offering ample reach and balance on standard lathes\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eApproach angle\u003c\/b\u003e: 93° left-hand approach for versatile cutting geometry and compatibility with DNMG15 insert layouts\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eClamping system\u003c\/b\u003e: Strong lever lock enables fast insert changes with reliable seating\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompatibility\u003c\/b\u003e: Specifically designed for DNMG15 turning inserts within the PDJNR\/L Series (Vortex)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eConfiguration\u003c\/b\u003e: Left-hand orientation tailored for common machining setups and cutting directions\u003c\/li\u003e\n\u003c\/ul\u003e \u003cp\u003e\nThis tool holder delivers precise alignment and repeatable performance, helping maintain hole quality and surface finish across a range of turning operations. The lever lock clamping minimizes setup time, reducing idle minutes in production and allowing quick toolrack replenishment without compromising grip or accuracy. Built to endure demanding machining environments, it provides dependable insertion seating and consistent cutting geometry with every change.\n\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Vortex","offers":[{"title":"Default Title","offer_id":43439091712078,"sku":"PRO1600528","price":30.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/PDJNR-L-93-Degree-Approach-Lever-Lock-Solid-Steel-Shank-Turning-Tool-for-DNMG-Inserts-TT-PDJNR-L-K-Series-Korloy-left_1_59_edd57ad7-ad8b-41c5-bff9-3020bb41807b.png?v=1770812421"}],"url":"https:\/\/www.protool-ltd.co.uk\/collections\/dnmg-turning-tool-holders.oembed","provider":"Protool Precision Tools","version":"1.0","type":"link"}