{"title":"Drill Thread Mills","description":"\u003cp\u003eDrill thread mills drill the hole, chamfer it and mill the thread with one tool, so there is no pilot drill and no tool change. Carmex MTD (two-flute, 45° chamfer, coolant bore), DMT (with or without coolant) and DMTH for hardened steels, stainless and superalloys, in Metric and UN. The same tool cuts right-hand and left-hand threads, in blind or through holes.\u003c\/p\u003e\u003cp\u003eAll held in UK stock. Order before 4.30pm for same-day dispatch, or call our technical team on 01732 887334 for help choosing.\u003c\/p\u003e","products":[{"product_id":"dmt06032c110-7iso-dmt7","title":"M4 x 0.7 Metric Internal 3-in-1 Drill Thread Mill 2.5xD – Carmex DMT 06032 C11 0.7 ISO-D MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal M4 x 0.7 metric threads. DMT is a 3-in-1 tool that drills the hole, cuts the thread and chamfers the edge in one circular-interpolation cycle, so there’s no separate drill and no tool change. It has internal coolant and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMT 06032 C11 0.7 ISO-D MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: M4 x 0.7, ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø3.15 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 11.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 58 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2.5×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282508165198,"sku":"DMT06032C110.7ISO-DMT7","price":108.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMT_3ceaf48f-bd22-493c-8b37-15cdb02f653f.png?v=1762874311"},{"product_id":"dmt06032c1232un-dmt7","title":"No. 8 x 32 TPI UN Internal 3-in-1 Drill Thread Mill 2.5xD – Carmex DMT 06032 C12 32 UN-D MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal No. 8 x 32 TPI UN threads. DMT is a 3-in-1 tool that drills the hole, cuts the thread and chamfers the edge in one circular-interpolation cycle, so there’s no separate drill and no tool change. It has internal coolant and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMT 06032 C12 32 UN-D MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: No. 8 x 32 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø3.20 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 12.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 58 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2.5×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282508197966,"sku":"DMT06032C1232UN-DMT7","price":108.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMT_60ea03db-3c5e-45a4-be62-960f61eb394d.png?v=1762874195"},{"product_id":"dmt06033c1236un-dmt7","title":"No. 8 x 36 TPI UN Internal 3-in-1 Drill Thread Mill 2.5xD – Carmex DMT 06033 C12 36 UN-D MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal No. 8 x 36 TPI UN threads. DMT is a 3-in-1 tool that drills the hole, cuts the thread and chamfers the edge in one circular-interpolation cycle, so there’s no separate drill and no tool change. It has internal coolant and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMT 06033 C12 36 UN-D MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: No. 8 x 36 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø3.30 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 12.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 58 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2.5×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282508230734,"sku":"DMT06033C1236UN-DMT7","price":108.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMT_1bc3754e-0b4c-45fb-8f16-1fe53683b84e.png?v=1762874370"},{"product_id":"dmt06038c1432un-dmt7","title":"No. 10 x 32 TPI UN Internal 3-in-1 Drill Thread Mill 2.5xD – Carmex DMT 06038 C14 32 UN-D MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal No. 10 x 32 TPI UN threads. DMT is a 3-in-1 tool that drills the hole, cuts the thread and chamfers the edge in one circular-interpolation cycle, so there’s no separate drill and no tool change. It has internal coolant and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMT 06038 C14 32 UN-D MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: No. 10 x 32 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø3.80 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 14.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 58 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2.5×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282508263502,"sku":"DMT06038C1432UN-DMT7","price":108.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMT_e243e3ee-ef5c-4476-8dbf-84f21c7a7916.png?v=1762874398"},{"product_id":"dmt0604c140-8iso-dmt","title":"M5 x 0.8 Metric Internal 3-in-1 Drill Thread Mill 2.5xD – Carmex DMT 0604 C14 0.8 ISO-D MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal M5 x 0.8 metric threads. DMT is a 3-in-1 tool that drills the hole, cuts the thread and chamfers the edge in one circular-interpolation cycle, so there’s no separate drill and no tool change. It has internal coolant and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMT 0604 C14 0.8 ISO-D MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: M5 x 0.8, ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø4.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 14.4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 58 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2.5×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282508329038,"sku":"DMT0604C140.8ISO-DMT7","price":108.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMT_6d984419-417e-4ce6-b33e-0e0f9a83fc9a.png?v=1762874299"},{"product_id":"dmt08047c141-0isomt7","title":"M6, M7, M8, M9 x 1 Metric Internal 3-in-1 Drill Thread Mill 2xD – Carmex DMT 08047 C14 1.0 ISO MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal M6, M7, M8, M9 x 1.0 metric threads. DMT is a 3-in-1 tool that drills the hole, cuts the thread and chamfers the edge in one circular-interpolation cycle, so there’s no separate drill and no tool change. It has internal coolant and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMT 08047 C14 1.0 ISO MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: M6, M7, M8, M9 x 1.0, ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø4.70 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 14.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 64 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282508361806,"sku":"DMT08047C141.0ISOMT7","price":144.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTCOOLANT_18973bf8-4555-4530-a329-9b1e2a69951f.jpg?v=1762874381"},{"product_id":"dmt08048c1420unmt7","title":"1\/4–3\/8 x 20 TPI UN Internal 3-in-1 Drill Thread Mill 2xD – Carmex DMT 08048 C14 20 UN MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal 1\/4–3\/8 x 20 TPI UN threads. DMT is a 3-in-1 tool that drills the hole, cuts the thread and chamfers the edge in one circular-interpolation cycle, so there’s no separate drill and no tool change. It has internal coolant and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMT 08048 C14 20 UN MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 1\/4–3\/8 x 20 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø4.80 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 14.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 64 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282508394574,"sku":"DMT08048C1420UNMT7","price":144.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTCOOLANT_b93d7fc3-e2af-4559-965c-83bc9f436fac.jpg?v=1762874439"},{"product_id":"dmt0805c1428unmt7","title":"1\/4–3\/8 x 28 TPI UN Internal 3-in-1 Drill Thread Mill 2xD – Carmex DMT 0805 C14 28 UN MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal 1\/4–3\/8 x 28 TPI UN threads. DMT is a 3-in-1 tool that drills the hole, cuts the thread and chamfers the edge in one circular-interpolation cycle, so there’s no separate drill and no tool change. It has internal coolant and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMT 0805 C14 28 UN MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 1\/4–3\/8 x 28 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø5.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 14.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 64 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282508427342,"sku":"DMT0805C1428UNMT7","price":108.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTCOOLANT_93e15f42-f514-4923-b609-6440c32904e1.jpg?v=1762874342"},{"product_id":"dmt08061d181-25isomt7","title":"M8, M9, M10, M12 x 1.25 Metric Internal 3-in-1 Drill Thread Mill 2xD – Carmex DMT 08061 D18 1.25 ISO MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal M8, M9, M10, M12 x 1.25 metric threads. DMT is a 3-in-1 tool that drills the hole, cuts the thread and chamfers the edge in one circular-interpolation cycle, so there’s no separate drill and no tool change. It has internal coolant and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMT 08061 D18 1.25 ISO MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: M8, M9, M10, M12 x 1.25, ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø6.10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 18.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 64 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282508460110,"sku":"DMT08061D181.25ISOMT7","price":144.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTCOOLANT_05d303bc-8832-4d3a-b382-4f892bab161b.jpg?v=1762874253"},{"product_id":"dmt08065d1724unmt7","title":"5\/16–1\/2 x 24 TPI UN Internal 3-in-1 Drill Thread Mill 2xD – Carmex DMT 08065 D17 24 UN MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal 5\/16–1\/2 x 24 TPI UN threads. DMT is a 3-in-1 tool that drills the hole, cuts the thread and chamfers the edge in one circular-interpolation cycle, so there’s no separate drill and no tool change. It has internal coolant and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMT 08065 D17 24 UN MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 5\/16–1\/2 x 24 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø6.50 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 17.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 64 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282508492878,"sku":"DMT08065D1724UNMT7","price":108.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTCOOLANT_89718e97-d7a2-4648-be7f-d7085f9cd9ab.jpg?v=1762874473"},{"product_id":"dmt08067c2216unmt7","title":"3\/8–1\/2 x 16 TPI UN Internal 3-in-1 Drill Thread Mill 2xD – Carmex DMT 08067 C22 16 UN MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal 3\/8–1\/2 x 16 TPI UN threads. DMT is a 3-in-1 tool that drills the hole, cuts the thread and chamfers the edge in one circular-interpolation cycle, so there’s no separate drill and no tool change. It has internal coolant and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMT 08067 C22 16 UN MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 3\/8–1\/2 x 16 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø6.70 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 22.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 64 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282508525646,"sku":"DMT08067C2216UNMT7","price":144.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTCOOLANT_ea5d172c-5162-4ef4-aec4-0de4e868bd49.jpg?v=1762874274"},{"product_id":"dmt0806d1718unmt7","title":"5\/16–7\/16 x 18 TPI UN Internal 3-in-1 Drill Thread Mill 2xD – Carmex DMT 0806 D17 18 UN MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal 5\/16–7\/16 x 18 TPI UN threads. DMT is a 3-in-1 tool that drills the hole, cuts the thread and chamfers the edge in one circular-interpolation cycle, so there’s no separate drill and no tool change. It has internal coolant and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMT 0806 D17 18 UN MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 5\/16–7\/16 x 18 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø6.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 17.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 64 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282508558414,"sku":"DMT0806D1718UNMT7","price":144.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTCOOLANT_96cbb23a-0429-4433-8bf1-0023a776f597.jpg?v=1762874331"},{"product_id":"dmt08078d231-5isomt7","title":"M10, M13–M15 x 1.5 Metric Internal 3-in-1 Drill Thread Mill 2xD – Carmex DMT 08078 D23 1.5 ISO MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal M10, M13–M15 x 1.5 metric threads. DMT is a 3-in-1 tool that drills the hole, cuts the thread and chamfers the edge in one circular-interpolation cycle, so there’s no separate drill and no tool change. It has internal coolant and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMT 08078 D23 1.5 ISO MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: M10, M13–M15 x 1.5, ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø7.80 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 23.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 64 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282508591182,"sku":"DMT08078D231.5ISOMT7","price":144.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTCOOLANT_143ea4f8-04ca-4d70-98ae-153873806bf1.jpg?v=1762874359"},{"product_id":"dmt1009d261-75isomt7","title":"M12 x 1.75 Metric Internal 3-in-1 Drill Thread Mill 2xD – Carmex DMT 1009 D26 1.75 ISO MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal M12 x 1.75 metric threads. DMT is a 3-in-1 tool that drills the hole, cuts the thread and chamfers the edge in one circular-interpolation cycle, so there’s no separate drill and no tool change. It has internal coolant and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMT 1009 D26 1.75 ISO MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: M12 x 1.75, ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø9.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 26.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 73 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282508623950,"sku":"DMT1009D261.75ISOMT7","price":187.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTCOOLANT_39fe4239-9ad3-4960-9fc5-930dc6a9da52.jpg?v=1762874391"},{"product_id":"dmt1010d2913unmt11","title":"1\/2 x 13 TPI UN Internal 3-in-1 Drill Thread Mill 2xD – Carmex DMT 1010 D29 13 UN MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal 1\/2 x 13 TPI UN threads. DMT is a 3-in-1 tool that drills the hole, cuts the thread and chamfers the edge in one circular-interpolation cycle, so there’s no separate drill and no tool change. It has internal coolant and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMT 1010 D29 13 UN MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 1\/2 x 13 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø10.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 29.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 73 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282508656718,"sku":"DMT1010D2913UNMT7","price":187.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTCOOLANT_21e22eb9-e0a1-41fc-9a64-a3019e28ff46.jpg?v=1762874233"},{"product_id":"dmt12118d352-0isomt7","title":"M16, M17–M23 x 2 Metric Internal 3-in-1 Drill Thread Mill 2xD – Carmex DMT 12118 D35 2.0 ISO MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal M16, M17–M23 x 2.0 metric threads. DMT is a 3-in-1 tool that drills the hole, cuts the thread and chamfers the edge in one circular-interpolation cycle, so there’s no separate drill and no tool change. It has internal coolant and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMT 12118 D35 2.0 ISO MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: M16, M17–M23 x 2.0, ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø11.80 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 35.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 84 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282508689486,"sku":"DMT12118D352.0ISOMT7","price":231.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTCOOLANT_17debd9f-1a30-4392-a212-464ea18e308e.jpg?v=1762874353"},{"product_id":"dmth06021c740unmt11","title":"No. 4, No. 5, No. 6 x 40 TPI UN Internal 3-in-1 Hardcut Drill Thread Mill 2xD – Carmex DMTH 06021 C7 40 UN MT11","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal No. 4, No. 5, No. 6 x 40 TPI UN threads. DMTH is the hard-material version of Carmex’s 3-in-1 DMT. It drills the hole, cuts the thread and chamfers the edge in one cycle, and works in steel, hardened steel, stainless and super alloys. It has internal coolant.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT11 is ultra-fine sub-micron carbide with Carmex’s blue PVD triple coating, for hardened steel, stainless and super alloys. Carmex rates this tool for material up to 55 HRc. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMTH 06021 C7 40 UN MT11\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: No. 4, No. 5, No. 6 x 40 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø2.10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 7.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 58 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT11 – PVD triple-coated ultra-fine carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282508722254,"sku":"DMTH06021C740UNMT11","price":124.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTH_bbdca500-4df1-40f0-ae77-c4ace3caa350.png?v=1762874188"},{"product_id":"dmth06026c832unmt11","title":"No. 6 x 32 TPI UN Internal 3-in-1 Hardcut Drill Thread Mill 2xD – Carmex DMTH 06026 C8 32 UN MT11","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal No. 6 x 32 TPI UN threads. DMTH is the hard-material version of Carmex’s 3-in-1 DMT. It drills the hole, cuts the thread and chamfers the edge in one cycle, and works in steel, hardened steel, stainless and super alloys. It has internal coolant.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT11 is ultra-fine sub-micron carbide with Carmex’s blue PVD triple coating, for hardened steel, stainless and super alloys. Carmex rates this tool for material up to 55 HRc. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMTH 06026 C8 32 UN MT11\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: No. 6 x 32 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø2.60 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 8.7 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 58 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT11 – PVD triple-coated ultra-fine carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282508755022,"sku":"DMTH06026C832UNMT11","price":124.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTH_915ac685-3b0b-453e-a7ee-1592c8829f9a.png?v=1762874244"},{"product_id":"dmth06032c110-7isomt11","title":"M4 x 0.7 Metric Internal 3-in-1 Hardcut Drill Thread Mill 2.5xD – Carmex DMTH 06032 C11 0.7 ISO MT11","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal M4 x 0.7 metric threads. DMTH is the hard-material version of Carmex’s 3-in-1 DMT. It drills the hole, cuts the thread and chamfers the edge in one cycle, and works in steel, hardened steel, stainless and super alloys. It has internal coolant.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT11 is ultra-fine sub-micron carbide with Carmex’s blue PVD triple coating, for hardened steel, stainless and super alloys. Carmex rates this tool for material up to 55 HRc. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMTH 06032 C11 0.7 ISO MT11\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: M4 x 0.7, ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø3.15 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 11.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 58 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2.5×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT11 – PVD triple-coated ultra-fine carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282508787790,"sku":"DMTH06032C110.7ISOMT11","price":124.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTH_293745c3-fb21-4b49-a734-331f93dbe5b5.png?v=1762874294"},{"product_id":"dmth0604c140-8isomt11","title":"M5 x 0.8 Metric Internal 3-in-1 Hardcut Drill Thread Mill 2.5xD – Carmex DMTH 0604 C14 0.8 ISO MT11","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal M5 x 0.8 metric threads. DMTH is the hard-material version of Carmex’s 3-in-1 DMT. It drills the hole, cuts the thread and chamfers the edge in one cycle, and works in steel, hardened steel, stainless and super alloys. It has internal coolant.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT11 is ultra-fine sub-micron carbide with Carmex’s blue PVD triple coating, for hardened steel, stainless and super alloys. Carmex rates this tool for material up to 55 HRc. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMTH 0604 C14 0.8 ISO MT11\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: M5 x 0.8, ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø4.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 14.4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 58 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2.5×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT11 – PVD triple-coated ultra-fine carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282508820558,"sku":"DMTH0604C140.8ISOMT11","price":124.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTH_13204baa-d61a-4667-b687-14458bfe3747.png?v=1762874347"},{"product_id":"dmth08047c141-0isomt11","title":"M6, M7, M8, M9 x 1 Metric Internal 3-in-1 Hardcut Drill Thread Mill 2xD – Carmex DMTH 08047 C14 1.0 ISO MT11","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal M6, M7, M8, M9 x 1.0 metric threads. DMTH is the hard-material version of Carmex’s 3-in-1 DMT. It drills the hole, cuts the thread and chamfers the edge in one cycle, and works in steel, hardened steel, stainless and super alloys. It has internal coolant.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT11 is ultra-fine sub-micron carbide with Carmex’s blue PVD triple coating, for hardened steel, stainless and super alloys. Carmex rates this tool for material up to 55 HRc. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMTH 08047 C14 1.0 ISO MT11\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: M6, M7, M8, M9 x 1.0, ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø4.70 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 14.4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 64 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT11 – PVD triple-coated ultra-fine carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282508853326,"sku":"DMTH08047C141.0ISOMT11","price":166.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTH_45bf2203-f9c9-4bde-8a84-1e8b20b38874.png?v=1762874468"},{"product_id":"dmth08048c1520unmt11","title":"1\/4–3\/8 x 20 TPI UN Internal 3-in-1 Hardcut Drill Thread Mill 2xD – Carmex DMTH 08048 C15 20 UN MT11","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal 1\/4–3\/8 x 20 TPI UN threads. DMTH is the hard-material version of Carmex’s 3-in-1 DMT. It drills the hole, cuts the thread and chamfers the edge in one cycle, and works in steel, hardened steel, stainless and super alloys. It has internal coolant.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT11 is ultra-fine sub-micron carbide with Carmex’s blue PVD triple coating, for hardened steel, stainless and super alloys. Carmex rates this tool for material up to 55 HRc. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMTH 08048 C15 20 UN MT11\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 1\/4–3\/8 x 20 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø4.80 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 15.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 64 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT11 – PVD triple-coated ultra-fine carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282508918862,"sku":"DMTH08048C1520UNMT11","price":166.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTH_3e289fd0-eba3-436c-8378-c74e7c0dfd57.png?v=1762874413"},{"product_id":"dmth0805c1428unmt11","title":"1\/4–3\/8 x 28 TPI UN Internal 3-in-1 Hardcut Drill Thread Mill 2xD – Carmex DMTH 0805 C14 28 UN MT11","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal 1\/4–3\/8 x 28 TPI UN threads. DMTH is the hard-material version of Carmex’s 3-in-1 DMT. It drills the hole, cuts the thread and chamfers the edge in one cycle, and works in steel, hardened steel, stainless and super alloys. It has internal coolant.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT11 is ultra-fine sub-micron carbide with Carmex’s blue PVD triple coating, for hardened steel, stainless and super alloys. Carmex rates this tool for material up to 55 HRc. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMTH 0805 C14 28 UN MT11\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 1\/4–3\/8 x 28 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø5.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 14.9 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 64 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT11 – PVD triple-coated ultra-fine carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282508951630,"sku":"DMTH0805C1428UNMT11","price":166.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTH_a476b66e-9340-4f33-9a24-812e2d90f230.png?v=1762874219"},{"product_id":"dmth08061d191-25isomt11","title":"M8, M9, M10, M12 x 1.25 Metric Internal 3-in-1 Hardcut Drill Thread Mill 2xD – Carmex DMTH 08061 D19 1.25 ISO MT11","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal M8, M9, M10, M12 x 1.25 metric threads. DMTH is the hard-material version of Carmex’s 3-in-1 DMT. It drills the hole, cuts the thread and chamfers the edge in one cycle, and works in steel, hardened steel, stainless and super alloys. It has internal coolant.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT11 is ultra-fine sub-micron carbide with Carmex’s blue PVD triple coating, for hardened steel, stainless and super alloys. Carmex rates this tool for material up to 55 HRc. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMTH 08061 D19 1.25 ISO MT11\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: M8, M9, M10, M12 x 1.25, ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø6.10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 19.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 64 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT11 – PVD triple-coated ultra-fine carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282508984398,"sku":"DMTH08061D191.25ISOMT11","price":166.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTH_6f24e38a-668f-42d2-ae3a-85dbfda726e5.png?v=1762874449"},{"product_id":"dmth08065d1824unmt11","title":"5\/16–1\/2 x 24 TPI UN Internal 3-in-1 Hardcut Drill Thread Mill 2xD – Carmex DMTH 08065 D18 24 UN MT11","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal 5\/16–1\/2 x 24 TPI UN threads. DMTH is the hard-material version of Carmex’s 3-in-1 DMT. It drills the hole, cuts the thread and chamfers the edge in one cycle, and works in steel, hardened steel, stainless and super alloys. It has internal coolant.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT11 is ultra-fine sub-micron carbide with Carmex’s blue PVD triple coating, for hardened steel, stainless and super alloys. Carmex rates this tool for material up to 55 HRc. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMTH 08065 D18 24 UN MT11\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 5\/16–1\/2 x 24 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø6.50 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 18.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 64 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT11 – PVD triple-coated ultra-fine carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282509049934,"sku":"DMTH08065D1824UNMT11","price":166.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTH_27a7fd5a-4163-444a-8c32-c8a4d363f315.png?v=1762874463"},{"product_id":"dmth08067c2216unmt11","title":"3\/8–1\/2 x 16 TPI UN Internal 3-in-1 Hardcut Drill Thread Mill 2xD – Carmex DMTH 08067 C22 16 UN MT11","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal 3\/8–1\/2 x 16 TPI UN threads. DMTH is the hard-material version of Carmex’s 3-in-1 DMT. It drills the hole, cuts the thread and chamfers the edge in one cycle, and works in steel, hardened steel, stainless and super alloys. It has internal coolant.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT11 is ultra-fine sub-micron carbide with Carmex’s blue PVD triple coating, for hardened steel, stainless and super alloys. Carmex rates this tool for material up to 55 HRc. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMTH 08067 C22 16 UN MT11\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 3\/8–1\/2 x 16 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø6.70 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 22.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 64 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT11 – PVD triple-coated ultra-fine carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282509082702,"sku":"DMTH08067C2216UNMT11","price":166.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTH_2524cbe7-bd5f-4789-ae11-be763459261c.png?v=1762874239"},{"product_id":"dmth0806d1918unmt11","title":"5\/16–7\/16 x 18 TPI UN Internal 3-in-1 Hardcut Drill Thread Mill 2xD – Carmex DMTH 0806 D19 18 UN MT11","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal 5\/16–7\/16 x 18 TPI UN threads. DMTH is the hard-material version of Carmex’s 3-in-1 DMT. It drills the hole, cuts the thread and chamfers the edge in one cycle, and works in steel, hardened steel, stainless and super alloys. It has internal coolant.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT11 is ultra-fine sub-micron carbide with Carmex’s blue PVD triple coating, for hardened steel, stainless and super alloys. Carmex rates this tool for material up to 55 HRc. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMTH 0806 D19 18 UN MT11\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 5\/16–7\/16 x 18 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø6.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 19.2 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 64 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT11 – PVD triple-coated ultra-fine carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282509148238,"sku":"DMTH0806D1918UNMT11","price":166.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTH_a49fef23-c61c-43c6-a81c-3d7ea662c8fd.png?v=1762874326"},{"product_id":"dmth08078d231-5isomt11","title":"M10, M13–M15 x 1.5 Metric Internal 3-in-1 Hardcut Drill Thread Mill 2xD – Carmex DMTH 08078 D23 1.5 ISO MT11","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal M10, M13–M15 x 1.5 metric threads. DMTH is the hard-material version of Carmex’s 3-in-1 DMT. It drills the hole, cuts the thread and chamfers the edge in one cycle, and works in steel, hardened steel, stainless and super alloys. It has internal coolant.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT11 is ultra-fine sub-micron carbide with Carmex’s blue PVD triple coating, for hardened steel, stainless and super alloys. Carmex rates this tool for material up to 55 HRc. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMTH 08078 D23 1.5 ISO MT11\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: M10, M13–M15 x 1.5, ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø7.80 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 23.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 64 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT11 – PVD triple-coated ultra-fine carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282509213774,"sku":"DMTH08078D231.5ISOMT11","price":166.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTH_ddde10fc-09d9-4c08-8a6b-7bfc0798329b.png?v=1762874259"},{"product_id":"dmth10092c3013unmt11","title":"1\/2 x 13 TPI UN Internal 3-in-1 Hardcut Drill Thread Mill 2xD – Carmex DMTH 10092 C30 13 UN MT11","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal 1\/2 x 13 TPI UN threads. DMTH is the hard-material version of Carmex’s 3-in-1 DMT. It drills the hole, cuts the thread and chamfers the edge in one cycle, and works in steel, hardened steel, stainless and super alloys. It has internal coolant.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT11 is ultra-fine sub-micron carbide with Carmex’s blue PVD triple coating, for hardened steel, stainless and super alloys. Carmex rates this tool for material up to 55 HRc. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMTH 10092 C30 13 UN MT11\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 1\/2 x 13 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø9.20 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 30.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 73 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT11 – PVD triple-coated ultra-fine carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282509246542,"sku":"DMTH10092C3013UNMT11","price":215.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTH_fcb0d766-ad95-4dc6-8484-e31972e7f661.png?v=1762874264"},{"product_id":"dmth1009d281-75isomt11","title":"M12 x 1.75 Metric Internal 3-in-1 Hardcut Drill Thread Mill 2xD – Carmex DMTH 1009 D28 1.75 ISO MT11","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal M12 x 1.75 metric threads. DMTH is the hard-material version of Carmex’s 3-in-1 DMT. It drills the hole, cuts the thread and chamfers the edge in one cycle, and works in steel, hardened steel, stainless and super alloys. It has internal coolant.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT11 is ultra-fine sub-micron carbide with Carmex’s blue PVD triple coating, for hardened steel, stainless and super alloys. Carmex rates this tool for material up to 55 HRc. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMTH 1009 D28 1.75 ISO MT11\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: M12 x 1.75, ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø9.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 28.1 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 73 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT11 – PVD triple-coated ultra-fine carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282509279310,"sku":"DMTH1009D281.75ISOMT11","price":215.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTH_57f3af65-ab5c-42db-bbf4-6c9064492f5a.png?v=1762874229"},{"product_id":"dmth12114c3711unmt11","title":"5\/8 x 11 TPI UN Internal 3-in-1 Hardcut Drill Thread Mill 2xD – Carmex DMTH 12114 C37 11 UN MT11","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal 5\/8 x 11 TPI UN threads. DMTH is the hard-material version of Carmex’s 3-in-1 DMT. It drills the hole, cuts the thread and chamfers the edge in one cycle, and works in steel, hardened steel, stainless and super alloys. It has internal coolant.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT11 is ultra-fine sub-micron carbide with Carmex’s blue PVD triple coating, for hardened steel, stainless and super alloys. Carmex rates this tool for material up to 55 HRc. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMTH 12114 C37 11 UN MT11\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 5\/8 x 11 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø11.40 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 37.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 84 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT11 – PVD triple-coated ultra-fine carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282509312078,"sku":"DMTH12114C3711UNMT11","price":254.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTH_7cf9787b-b273-4a28-a59d-18ec92bbbb66.png?v=1762874423"},{"product_id":"dmth12118d362-0isomt11","title":"M16, M17–M23 x 2 Metric Internal 3-in-1 Hardcut Drill Thread Mill 2xD – Carmex DMTH 12118 D36 2.0 ISO MT11","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal M16, M17–M23 x 2.0 metric threads. DMTH is the hard-material version of Carmex’s 3-in-1 DMT. It drills the hole, cuts the thread and chamfers the edge in one cycle, and works in steel, hardened steel, stainless and super alloys. It has internal coolant.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT11 is ultra-fine sub-micron carbide with Carmex’s blue PVD triple coating, for hardened steel, stainless and super alloys. Carmex rates this tool for material up to 55 HRc. It’s a \u003cb\u003eleft-hand cutting\u003c\/b\u003e tool, so program the spindle in reverse (M04).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: DMTH 12118 D36 2.0 ISO MT11\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: M16, M17–M23 x 2.0, ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø11.80 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 36.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 84 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D1 (× nominal diameter)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT11 – PVD triple-coated ultra-fine carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting direction\u003c\/b\u003e: Left-hand cutting (M04)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282509344846,"sku":"DMTH12118D362.0ISOMT11","price":254.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/DMTH_dcccd61c-87f6-4b0c-a5c2-c9e98eaeaa35.png?v=1762874305"},{"product_id":"mtd06032b70-7isok20","title":"M4 x 0.7 Metric Internal Drill Thread Mill – Carmex MTD 06032 B7 0.7 ISO K20","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal M4 x 0.7 metric threads. MT Drill is a two-flute drill and thread mill with a 45° chamfering edge. It drills, chamfers and mills the thread in one operation, which suits volume production. It has internal coolant, cuts right-hand or left-hand threads, and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. K20 is uncoated sub-micron carbide with a sharp edge, the right choice for aluminium and cast iron.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: MTD 06032 B7 0.7 ISO K20\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: M4 x 0.7, ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread cutting diameter\u003c\/b\u003e: Ø3.20 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrill diameter\u003c\/b\u003e: Ø3.30 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread length\u003c\/b\u003e: 7.7 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 54 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: K20 – uncoated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282522976334,"sku":"MTD06032B70.7ISOK20","price":105.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/MTD_3e1d7f10-057b-433c-b01c-3725d15a5bc7.png?v=1762874753"},{"product_id":"mtd06032b70-7isomt7","title":"M4 x 0.7 Metric Internal Drill Thread Mill – Carmex MTD 06032 B7 0.7 ISO MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal M4 x 0.7 metric threads. MT Drill is a two-flute drill and thread mill with a 45° chamfering edge. It drills, chamfers and mills the thread in one operation, which suits volume production. It has internal coolant, cuts right-hand or left-hand threads, and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: MTD 06032 B7 0.7 ISO MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: M4 x 0.7, ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread cutting diameter\u003c\/b\u003e: Ø3.20 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrill diameter\u003c\/b\u003e: Ø3.30 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread length\u003c\/b\u003e: 7.7 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 54 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282523009102,"sku":"MTD06032B70.7ISOMT7","price":116.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/MTD_ba867ec0-886f-440a-8699-3845981f4967.png?v=1762874777"},{"product_id":"mtd06038b932unmt7","title":"No. 10 x 32 TPI UN Internal Drill Thread Mill – Carmex MTD 06038 B9 32 UN MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal No. 10 x 32 TPI UN threads. MT Drill is a two-flute drill and thread mill with a 45° chamfering edge. It drills, chamfers and mills the thread in one operation, which suits volume production. It has internal coolant, cuts right-hand or left-hand threads, and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: MTD 06038 B9 32 UN MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: No. 10 x 32 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread cutting diameter\u003c\/b\u003e: Ø3.80 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrill diameter\u003c\/b\u003e: Ø4.10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread length\u003c\/b\u003e: 9.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 54 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282523041870,"sku":"MTD06038B932UNMT7","price":116.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/MTD_f3aa3e39-a284-4531-82a7-0d2ea55c534f.png?v=1762874730"},{"product_id":"mtd0604b90-8isok20","title":"M5 x 0.8 Metric Internal Drill Thread Mill – Carmex MTD 0604 B9 0.8 ISO K20","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal M5 x 0.8 metric threads. MT Drill is a two-flute drill and thread mill with a 45° chamfering edge. It drills, chamfers and mills the thread in one operation, which suits volume production. It has internal coolant, cuts right-hand or left-hand threads, and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. K20 is uncoated sub-micron carbide with a sharp edge, the right choice for aluminium and cast iron.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: MTD 0604 B9 0.8 ISO K20\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: M5 x 0.8, ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread cutting diameter\u003c\/b\u003e: Ø4.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrill diameter\u003c\/b\u003e: Ø4.20 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread length\u003c\/b\u003e: 9.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 54 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: K20 – uncoated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282523074638,"sku":"MTD0604B90.8ISOK20","price":105.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/MTD_d0804372-9891-4514-b16d-e0b022592952.png?v=1762874860"},{"product_id":"mtd0604b90-8isomt7","title":"M5 x 0.8 Metric Internal Drill Thread Mill – Carmex MTD 0604 B9 0.8 ISO MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal M5 x 0.8 metric threads. MT Drill is a two-flute drill and thread mill with a 45° chamfering edge. It drills, chamfers and mills the thread in one operation, which suits volume production. It has internal coolant, cuts right-hand or left-hand threads, and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: MTD 0604 B9 0.8 ISO MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: M5 x 0.8, ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread cutting diameter\u003c\/b\u003e: Ø4.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrill diameter\u003c\/b\u003e: Ø4.20 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread length\u003c\/b\u003e: 9.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 54 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282523107406,"sku":"MTD0604B90.8ISOMT7","price":116.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/MTD_0bcd831a-bac2-4de5-8203-098c8a6a6b5e.png?v=1762874763"},{"product_id":"mtd08048b121-0isok20","title":"M6 x 1 Metric Internal Drill Thread Mill – Carmex MTD 08048 B12 1.0 ISO K20","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal M6 x 1.0 metric threads. MT Drill is a two-flute drill and thread mill with a 45° chamfering edge. It drills, chamfers and mills the thread in one operation, which suits volume production. It has internal coolant, cuts right-hand or left-hand threads, and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. K20 is uncoated sub-micron carbide with a sharp edge, the right choice for aluminium and cast iron.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: MTD 08048 B12 1.0 ISO K20\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: M6 x 1.0, ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread cutting diameter\u003c\/b\u003e: Ø4.80 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrill diameter\u003c\/b\u003e: Ø5.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread length\u003c\/b\u003e: 12.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 62 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: K20 – uncoated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282523140174,"sku":"MTD08048B121.0ISOK20","price":124.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/MTD_df8c0c36-360e-4cef-b6cd-fc544ca61c3b.png?v=1762874740"},{"product_id":"mtd08048b121-0isomt7","title":"M6 x 1 Metric Internal Drill Thread Mill – Carmex MTD 08048 B12 1.0 ISO MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal M6 x 1.0 metric threads. MT Drill is a two-flute drill and thread mill with a 45° chamfering edge. It drills, chamfers and mills the thread in one operation, which suits volume production. It has internal coolant, cuts right-hand or left-hand threads, and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: MTD 08048 B12 1.0 ISO MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: M6 x 1.0, ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread cutting diameter\u003c\/b\u003e: Ø4.80 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrill diameter\u003c\/b\u003e: Ø5.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread length\u003c\/b\u003e: 12.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 62 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282523172942,"sku":"MTD08048B121.0ISOMT7","price":137.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/MTD_5f2230fa-35a7-4fa1-b75a-1df39ddbcbdb.png?v=1762874816"},{"product_id":"mtd08048b1220unmt7","title":"1\/4 x 20 TPI UN Internal Drill Thread Mill – Carmex MTD 08048 B12 20 UN MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal 1\/4 x 20 TPI UN threads. MT Drill is a two-flute drill and thread mill with a 45° chamfering edge. It drills, chamfers and mills the thread in one operation, which suits volume production. It has internal coolant, cuts right-hand or left-hand threads, and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: MTD 08048 B12 20 UN MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 1\/4 x 20 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread cutting diameter\u003c\/b\u003e: Ø4.80 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrill diameter\u003c\/b\u003e: Ø5.20 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread length\u003c\/b\u003e: 12.7 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 62 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282523205710,"sku":"MTD08048B1220UNMT7","price":137.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/MTD_a39ce5c2-68a5-4295-9b66-ab616b3f2231.png?v=1762874768"},{"product_id":"mtd08052b1328unmt7","title":"1\/4 x 28 TPI UN Internal Drill Thread Mill – Carmex MTD 08052 B13 28 UN MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal 1\/4 x 28 TPI UN threads. MT Drill is a two-flute drill and thread mill with a 45° chamfering edge. It drills, chamfers and mills the thread in one operation, which suits volume production. It has internal coolant, cuts right-hand or left-hand threads, and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: MTD 08052 B13 28 UN MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 1\/4 x 28 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread cutting diameter\u003c\/b\u003e: Ø5.20 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrill diameter\u003c\/b\u003e: Ø5.50 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread length\u003c\/b\u003e: 13.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 62 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282523238478,"sku":"MTD08052B1328UNMT7","price":137.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/MTD_77180ec2-fcb5-4449-8fe6-b099011459ef.png?v=1762874772"},{"product_id":"mtd10061b1518unmt7","title":"5\/16 x 18 TPI UN Internal Drill Thread Mill – Carmex MTD 10061 B15 18 UN MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal 5\/16 x 18 TPI UN threads. MT Drill is a two-flute drill and thread mill with a 45° chamfering edge. It drills, chamfers and mills the thread in one operation, which suits volume production. It has internal coolant, cuts right-hand or left-hand threads, and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: MTD 10061 B15 18 UN MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 5\/16 x 18 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread cutting diameter\u003c\/b\u003e: Ø6.10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrill diameter\u003c\/b\u003e: Ø6.60 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread length\u003c\/b\u003e: 15.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 74 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282523271246,"sku":"MTD10061B1518UNMT7","price":166.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/MTD_bf2481e2-8318-4bf0-b939-6363b1b27a76.png?v=1762874821"},{"product_id":"mtd10064b151-25isok20","title":"M8 x 1.25 Metric Internal Drill Thread Mill – Carmex MTD 10064 B15 1.25 ISO K20","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal M8 x 1.25 metric threads. MT Drill is a two-flute drill and thread mill with a 45° chamfering edge. It drills, chamfers and mills the thread in one operation, which suits volume production. It has internal coolant, cuts right-hand or left-hand threads, and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. K20 is uncoated sub-micron carbide with a sharp edge, the right choice for aluminium and cast iron.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: MTD 10064 B15 1.25 ISO K20\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: M8 x 1.25, ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread cutting diameter\u003c\/b\u003e: Ø6.40 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrill diameter\u003c\/b\u003e: Ø6.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread length\u003c\/b\u003e: 15.1 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 74 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: K20 – uncoated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282523304014,"sku":"MTD10064B151.25ISOK20","price":151.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/MTD_5b63697c-2e85-402a-8aa0-6ef254267473.png?v=1762874735"},{"product_id":"mtd10064b151-25isomt7","title":"M8 x 1.25 Metric Internal Drill Thread Mill – Carmex MTD 10064 B15 1.25 ISO MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal M8 x 1.25 metric threads. MT Drill is a two-flute drill and thread mill with a 45° chamfering edge. It drills, chamfers and mills the thread in one operation, which suits volume production. It has internal coolant, cuts right-hand or left-hand threads, and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: MTD 10064 B15 1.25 ISO MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: M8 x 1.25, ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread cutting diameter\u003c\/b\u003e: Ø6.40 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrill diameter\u003c\/b\u003e: Ø6.75 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread length\u003c\/b\u003e: 15.1 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 74 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282523336782,"sku":"MTD10064B151.25ISOMT7","price":166.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/MTD_e2d42643-340d-4d12-a2a5-4012799bbf61.png?v=1762874758"},{"product_id":"mtd10066b1524unmt7","title":"5\/16 x 24 TPI UN Internal Drill Thread Mill – Carmex MTD 10066 B15 24 UN MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal 5\/16 x 24 TPI UN threads. MT Drill is a two-flute drill and thread mill with a 45° chamfering edge. It drills, chamfers and mills the thread in one operation, which suits volume production. It has internal coolant, cuts right-hand or left-hand threads, and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: MTD 10066 B15 24 UN MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 5\/16 x 24 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread cutting diameter\u003c\/b\u003e: Ø6.60 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrill diameter\u003c\/b\u003e: Ø6.90 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread length\u003c\/b\u003e: 15.9 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 74 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282523369550,"sku":"MTD10066B1524UNMT7","price":166.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/MTD_1d827f17-035c-4e17-8fa4-d3dc2b9c2d8e.png?v=1762874802"},{"product_id":"mtd12075b1916unmt7","title":"3\/8 x 16 TPI UN Internal Drill Thread Mill – Carmex MTD 12075 B19 16 UN MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal 3\/8 x 16 TPI UN threads. MT Drill is a two-flute drill and thread mill with a 45° chamfering edge. It drills, chamfers and mills the thread in one operation, which suits volume production. It has internal coolant, cuts right-hand or left-hand threads, and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: MTD 12075 B19 16 UN MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 3\/8 x 16 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread cutting diameter\u003c\/b\u003e: Ø7.50 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrill diameter\u003c\/b\u003e: Ø8.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread length\u003c\/b\u003e: 19.1 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 80 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282523435086,"sku":"MTD12075B1916UNMT7","price":211.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/MTD_9b16322a-b61c-4a15-ad8a-df228087558e.png?v=1762874886"},{"product_id":"mtd12082b1924unmt7","title":"3\/8 x 24 TPI UN Internal Drill Thread Mill – Carmex MTD 12082 B19 24 UN MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal 3\/8 x 24 TPI UN threads. MT Drill is a two-flute drill and thread mill with a 45° chamfering edge. It drills, chamfers and mills the thread in one operation, which suits volume production. It has internal coolant, cuts right-hand or left-hand threads, and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: MTD 12082 B19 24 UN MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 3\/8 x 24 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread cutting diameter\u003c\/b\u003e: Ø8.20 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrill diameter\u003c\/b\u003e: Ø8.50 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread length\u003c\/b\u003e: 19.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 80 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282523467854,"sku":"MTD12082B1924UNMT7","price":211.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/MTD_a52b9e02-9d5c-4c03-8342-6e101f4e05ad.png?v=1762874744"},{"product_id":"mtd12088b2114unmt7","title":"7\/16 x 14 TPI UN Internal Drill Thread Mill – Carmex MTD 12088 B21 14 UN MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal 7\/16 x 14 TPI UN threads. MT Drill is a two-flute drill and thread mill with a 45° chamfering edge. It drills, chamfers and mills the thread in one operation, which suits volume production. It has internal coolant, cuts right-hand or left-hand threads, and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: MTD 12088 B21 14 UN MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 7\/16 x 14 TPI, UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread cutting diameter\u003c\/b\u003e: Ø8.80 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrill diameter\u003c\/b\u003e: Ø9.40 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread length\u003c\/b\u003e: 21.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 80 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282523500622,"sku":"MTD12088B2114UNMT7","price":211.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/MTD_ad3ba8ca-9dca-4293-b43c-ad163cc0e9e6.png?v=1762874749"},{"product_id":"mtd1208b191-5isok20","title":"M10 x 1.5 Metric Internal Drill Thread Mill – Carmex MTD 1208 B19 1.5 ISO K20","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal M10 x 1.5 metric threads. MT Drill is a two-flute drill and thread mill with a 45° chamfering edge. It drills, chamfers and mills the thread in one operation, which suits volume production. It has internal coolant, cuts right-hand or left-hand threads, and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. K20 is uncoated sub-micron carbide with a sharp edge, the right choice for aluminium and cast iron.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: MTD 1208 B19 1.5 ISO K20\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: M10 x 1.5, ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread cutting diameter\u003c\/b\u003e: Ø8.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrill diameter\u003c\/b\u003e: Ø8.50 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread length\u003c\/b\u003e: 19.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 80 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: K20 – uncoated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282523533390,"sku":"MTD1208B191.5ISOK20","price":192.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/MTD_f0029348-2aa8-44b3-8365-571a686b7ff0.png?v=1762874900"},{"product_id":"mtd1208b191-5isomt7","title":"M10 x 1.5 Metric Internal Drill Thread Mill – Carmex MTD 1208 B19 1.5 ISO MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for internal M10 x 1.5 metric threads. MT Drill is a two-flute drill and thread mill with a 45° chamfering edge. It drills, chamfers and mills the thread in one operation, which suits volume production. It has internal coolant, cuts right-hand or left-hand threads, and works in blind or through holes.\u003c\/p\u003e\n\u003cp\u003eThis is an \u003cb\u003einternal-only\u003c\/b\u003e thread mill, and Carmex doesn’t list it for external threads. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: MTD 1208 B19 1.5 ISO MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: M10 x 1.5, ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread cutting diameter\u003c\/b\u003e: Ø8.00 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDrill diameter\u003c\/b\u003e: Ø8.50 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread length\u003c\/b\u003e: 19.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 80 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eMax thread depth\u003c\/b\u003e: 2×D\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCoolant\u003c\/b\u003e: Internal coolant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282523566158,"sku":"MTD1208B191.5ISOMT7","price":211.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/MTD_2001d613-ada3-40a9-a286-8c2bf9c3830b.png?v=1762874841"}],"url":"https:\/\/www.protool-ltd.co.uk\/collections\/drill-thread-mills.oembed","provider":"Protool Precision Tools","version":"1.0","type":"link"}