{"title":"External Thread Mills","description":"\u003cp\u003eCarmex MT thread mills made for external threads in Metric ISO, UN, MJ and UNJ, with spiral flutes and 3 to 5 flutes for a clean finish on studs, spigots and bosses. Pipe-thread tools (BSP, BSPT, NPT, NPTF) and 60° and 55° partial-profile tools also cut external threads, and are listed under their thread form.\u003c\/p\u003e\u003cp\u003eAll held in UK stock. Order before 4.30pm for same-day dispatch, or call our technical team on 01732 887334 for help choosing.\u003c\/p\u003e","products":[{"product_id":"emt0606c1332unjmt7","title":"32 TPI UNJ External Thread Mill Ø6mm – Carmex EMT 0606 C13 32 UNJ MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external UNJ threads at 32 TPI. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 0606 C13 32 UNJ MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 32 TPI UNJ\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø6.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 13.9 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 57 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282509410382,"sku":"EMT0606C1332UNJMT7","price":127.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_5f8d6303-9cc6-4d05-b6b9-3a1045434be8.png?v=1762874289"},{"product_id":"emt0808d1728unjmt7","title":"28 TPI UNJ External Thread Mill Ø8mm – Carmex EMT 0808 D17 28 UNJ MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external UNJ threads at 28 TPI. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 0808 D17 28 UNJ MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 28 TPI UNJ\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø8.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 17.7 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 63 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282509475918,"sku":"EMT0808D1728UNJMT7","price":170.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_8b24a1fa-4d2a-4d8f-87e2-c31cd994c2d3.png?v=1762874408"},{"product_id":"emt1010c172-0isomt7","title":"2 mm Pitch Metric External Thread Mill Ø10mm – Carmex EMT 1010 C17 2.0 ISO MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external metric threads at 2.0 mm pitch. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1010 C17 2.0 ISO MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 2.0 mm pitch ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø10.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 17.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 73 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282509508686,"sku":"EMT1010C172.0ISOMT7","price":196.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_5072782f-0521-4442-ada9-167709d10792.png?v=1762874180"},{"product_id":"emt1010c212-0mjmt7","title":"2 mm Pitch MJ External Thread Mill Ø10mm – Carmex EMT 1010 C21 2.0 MJ MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external MJ threads at 2.0 mm pitch. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1010 C21 2.0 MJ MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 2.0 mm pitch MJ\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø10.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 21.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 72 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282509541454,"sku":"EMT1010C212.0MJMT7","price":196.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_fd23e29f-d23e-4aad-ad14-0eacb65f4d6b.png?v=1762874134"},{"product_id":"emt1010d151-5isomt7","title":"1.5 mm Pitch Metric External Thread Mill Ø10mm – Carmex EMT 1010 D15 1.5 ISO MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external metric threads at 1.5 mm pitch. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1010 D15 1.5 ISO MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 1.5 mm pitch ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø10.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 15.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 73 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282509574222,"sku":"EMT1010D151.5ISOMT7","price":196.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_7302bd71-4be4-4894-80a5-745462aee11f.png?v=1762874139"},{"product_id":"emt1010d161-0isomt7","title":"1 mm Pitch Metric External Thread Mill Ø10mm – Carmex EMT 1010 D16 1.0 ISO MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external metric threads at 1.0 mm pitch. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1010 D16 1.0 ISO MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 1.0 mm pitch ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø10.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 16.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 73 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282509606990,"sku":"EMT1010D161.0ISOMT7","price":196.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_243ec541-d2e2-4d18-bed9-0d3e5f958ee7.png?v=1762874428"},{"product_id":"emt1010d161-25isomt7","title":"1.25 mm Pitch Metric External Thread Mill Ø10mm – Carmex EMT 1010 D16 1.25 ISO MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external metric threads at 1.25 mm pitch. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1010 D16 1.25 ISO MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 1.25 mm pitch ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø10.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 16.9 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 73 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282509639758,"sku":"EMT1010D161.25ISOMT7","price":196.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_d1dbcae1-f86b-4506-8bc3-de80d7c08834.png?v=1762874201"},{"product_id":"emt1010d1624unmt7","title":"24 TPI UN External Thread Mill Ø10mm – Carmex EMT 1010 D16 24 UN MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external UN threads at 24 TPI. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1010 D16 24 UN MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 24 TPI UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø10.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 16.4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 73 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282509672526,"sku":"EMT1010D1624UNMT7","price":196.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_f3b78ce5-ed09-46b9-83ef-a5615525f048.png?v=1762874210"},{"product_id":"emt1010d191-25mjmt7","title":"1.25 mm Pitch MJ External Thread Mill Ø10mm – Carmex EMT 1010 D19 1.25 MJ MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external MJ threads at 1.25 mm pitch. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1010 D19 1.25 MJ MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 1.25 mm pitch MJ\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø10.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 19.4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 72 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282509705294,"sku":"EMT1010D191.25MJMT7","price":196.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_371f5b8f-149b-4fb0-9d10-3cbd8b25d3a7.png?v=1762874224"},{"product_id":"emt1010d201-0mjmt7","title":"1 mm Pitch MJ External Thread Mill Ø10mm – Carmex EMT 1010 D20 1.0 MJ MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external MJ threads at 1.0 mm pitch. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1010 D20 1.0 MJ MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 1.0 mm pitch MJ\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø10.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 20.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 72 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282509738062,"sku":"EMT1010D201.0MJMT7","price":196.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_109ee93e-585e-43b0-aab0-0ad0f32922c9.png?v=1762874174"},{"product_id":"emt1010d2024unjmt7","title":"24 TPI UNJ External Thread Mill Ø10mm – Carmex EMT 1010 D20 24 UNJ MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external UNJ threads at 24 TPI. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1010 D20 24 UNJ MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 24 TPI UNJ\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø10.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 20.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 72 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282509803598,"sku":"EMT1010D2024UNJMT7","price":196.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_66ca10c6-9786-40c0-b7ff-3ffc12c3e626.png?v=1762874214"},{"product_id":"emt1010d211-5mjmt7","title":"1.5 mm Pitch MJ External Thread Mill Ø10mm – Carmex EMT 1010 D21 1.5 MJ MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external MJ threads at 1.5 mm pitch. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1010 D21 1.5 MJ MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 1.5 mm pitch MJ\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø10.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 21.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 72 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282509836366,"sku":"EMT1010D211.5MJMT7","price":196.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_8dfedd2d-1641-44ea-900e-8075b7b6e497.png?v=1762874418"},{"product_id":"emt1212d201-5isomt7","title":"1.5 mm Pitch Metric External Thread Mill Ø12mm – Carmex EMT 1212 D20 1.5 ISO MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external metric threads at 1.5 mm pitch. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1212 D20 1.5 ISO MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 1.5 mm pitch ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø12.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 20.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 84 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282509901902,"sku":"EMT1212D201.5ISOMT7","price":245.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_b2ffb292-44ee-4e7c-b7e4-fc37647a840e.png?v=1762874279"},{"product_id":"emt1212d201-75isomt7","title":"1.75 mm Pitch Metric External Thread Mill Ø12mm – Carmex EMT 1212 D20 1.75 ISO MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external metric threads at 1.75 mm pitch. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1212 D20 1.75 ISO MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 1.75 mm pitch ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø12.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 20.1 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 84 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282509934670,"sku":"EMT1212D201.75ISOMT7","price":245.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_90555ddd-36cc-4e60-a49f-6c65492621c1.png?v=1762874149"},{"product_id":"emt1212d2012unmt7","title":"12 TPI UN External Thread Mill Ø12mm – Carmex EMT 1212 D20 12 UN MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external UN threads at 12 TPI. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1212 D20 12 UN MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 12 TPI UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø12.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 20.1 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 84 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282509967438,"sku":"EMT1212D2012UNMT7","price":245.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_1d78a183-2de3-4eff-84a5-75f3e7ef7faf.png?v=1762874484"},{"product_id":"emt1212d2014unmt7","title":"14 TPI UN External Thread Mill Ø12mm – Carmex EMT 1212 D20 14 UN MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external UN threads at 14 TPI. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1212 D20 14 UN MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 14 TPI UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø12.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 20.9 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 84 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282510032974,"sku":"EMT1212D2014UNMT7","price":245.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_2b6b4b00-08b2-4b3c-8c1d-0277a988caba.png?v=1762874513"},{"product_id":"emt1212d2018unmt7","title":"18 TPI UN External Thread Mill Ø12mm – Carmex EMT 1212 D20 18 UN MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external UN threads at 18 TPI. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1212 D20 18 UN MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 18 TPI UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø12.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 20.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 84 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282510098510,"sku":"EMT1212D2018UNMT7","price":245.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_55fa3ab1-1040-46ea-bafe-0e6fba5887d5.png?v=1762874508"},{"product_id":"emt1212d2116unmt7","title":"16 TPI UN External Thread Mill Ø12mm – Carmex EMT 1212 D21 16 UN MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external UN threads at 16 TPI. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1212 D21 16 UN MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 16 TPI UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø12.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 21.4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 84 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282510164046,"sku":"EMT1212D2116UNMT7","price":245.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_8021141f-4f99-4e03-a237-00e15ed564c3.png?v=1762874558"},{"product_id":"emt1212d212-0isomt7","title":"2 mm Pitch Metric External Thread Mill Ø12mm – Carmex EMT 1212 D21 2.0 ISO MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external metric threads at 2.0 mm pitch. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1212 D21 2.0 ISO MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 2.0 mm pitch ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø12.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 21.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 84 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282510196814,"sku":"EMT1212D212.0ISOMT7","price":245.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_1d9fe50c-33bb-4c88-a1fa-d48376dbcbd1.png?v=1762874517"},{"product_id":"emt1212d261-5mjmt7","title":"1.5 mm Pitch MJ External Thread Mill Ø12mm – Carmex EMT 1212 D26 1.5 MJ MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external MJ threads at 1.5 mm pitch. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1212 D26 1.5 MJ MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 1.5 mm pitch MJ\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø12.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 26.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 83 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282510229582,"sku":"EMT1212D261.5MJMT7","price":245.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_8492318d-9246-47a3-a52f-0f4c06967cb1.png?v=1762874503"},{"product_id":"emt1212d2612unjmt7","title":"12 TPI UNJ External Thread Mill Ø12mm – Carmex EMT 1212 D26 12 UNJ MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external UNJ threads at 12 TPI. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1212 D26 12 UNJ MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 12 TPI UNJ\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø12.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 26.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 83 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282510262350,"sku":"EMT1212D2612UNJMT7","price":245.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_1e36efb9-dd97-49f2-98e3-26a0e3f24580.png?v=1762874538"},{"product_id":"emt1212d2614unjmt7","title":"14 TPI UNJ External Thread Mill Ø12mm – Carmex EMT 1212 D26 14 UNJ MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external UNJ threads at 14 TPI. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1212 D26 14 UNJ MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 14 TPI UNJ\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø12.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 26.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 83 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282510295118,"sku":"EMT1212D2614UNJMT7","price":245.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_d9224cce-68f8-45a1-b9db-e5babcc4d69e.png?v=1762874488"},{"product_id":"emt1212d2616unjmt7","title":"16 TPI UNJ External Thread Mill Ø12mm – Carmex EMT 1212 D26 16 UNJ MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external UNJ threads at 16 TPI. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1212 D26 16 UNJ MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 16 TPI UNJ\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø12.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 26.2 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 83 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282510327886,"sku":"EMT1212D2616UNJMT7","price":245.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_b1d57b8c-c830-49bb-8f75-2cc2f8804d95.png?v=1762874522"},{"product_id":"emt1212d2618unjmt7","title":"18 TPI UNJ External Thread Mill Ø12mm – Carmex EMT 1212 D26 18 UNJ MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external UNJ threads at 18 TPI. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1212 D26 18 UNJ MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 18 TPI UNJ\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø12.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 26.1 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 83 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282510360654,"sku":"EMT1212D2618UNJMT7","price":245.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_c0a94ab4-d41a-49d9-a856-ab13498faca2.png?v=1762874542"},{"product_id":"emt1212d272-0mjmt7","title":"2 mm Pitch MJ External Thread Mill Ø12mm – Carmex EMT 1212 D27 2.0 MJ MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external MJ threads at 2.0 mm pitch. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1212 D27 2.0 MJ MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 2.0 mm pitch MJ\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø12.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 27.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 83 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282510393422,"sku":"EMT1212D272.0MJMT7","price":245.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_fa73ea47-0119-46b5-9a5a-e59b52dd47cb.png?v=1762874638"},{"product_id":"emt1212e201-0isomt7","title":"1 mm Pitch Metric External Thread Mill Ø12mm – Carmex EMT 1212 E20 1.0 ISO MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external metric threads at 1.0 mm pitch. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1212 E20 1.0 ISO MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 1.0 mm pitch ISO metric\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø12.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 20.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 84 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282510426190,"sku":"EMT1212E201.0ISOMT7","price":245.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_948f6cce-57b0-44b2-8acf-f110ce1783fe.png?v=1762874498"},{"product_id":"emt1212e2120unmt7","title":"20 TPI UN External Thread Mill Ø12mm – Carmex EMT 1212 E21 20 UN MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external UN threads at 20 TPI. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1212 E21 20 UN MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 20 TPI UN – UNC\/UNF\/UNEF\/UNS\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø12.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 21.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 84 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282510458958,"sku":"EMT1212E2120UNMT7","price":245.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_408f8b68-3550-4e44-85f8-4240edc04084.png?v=1762874493"},{"product_id":"emt1212e241-0mjmt7","title":"1 mm Pitch MJ External Thread Mill Ø12mm – Carmex EMT 1212 E24 1.0 MJ MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external MJ threads at 1.0 mm pitch. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1212 E24 1.0 MJ MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 1.0 mm pitch MJ\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø12.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 24.5 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 83 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282510491726,"sku":"EMT1212E241.0MJMT7","price":245.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_4a4ff7cc-32c3-4b31-a56f-16c738742aab.png?v=1762874633"},{"product_id":"emt1212e2720unjmt7","title":"20 TPI UNJ External Thread Mill Ø12mm – Carmex EMT 1212 E27 20 UNJ MT7","description":"\u003cdiv\u003e\n\u003cp\u003eSolid carbide thread mill for external UNJ threads at 20 TPI. EMT tools are made for external threads: studs, spigots and shafts. Spiral flutes give a good finish, and with 3 to 5 flutes the cycle is short.\u003c\/p\u003e\n\u003cp\u003eIt cuts \u003cb\u003eexternal threads only\u003c\/b\u003e. For internal threads, use the Carmex MT, MTB or MTZ ranges. MT7 is Carmex’s general-purpose grade: sub-micron carbide with a TiAlN multi-layer coating, meant to run at medium to high cutting speeds across all materials. Carmex rates this tool for material up to 47 HRc.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eCarmex code\u003c\/b\u003e: EMT 1212 E27 20 UNJ MT7\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eThread\u003c\/b\u003e: 20 TPI UNJ\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting diameter\u003c\/b\u003e: Ø12.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFlutes\u003c\/b\u003e: 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCutting length\u003c\/b\u003e: 27.3 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eOverall length\u003c\/b\u003e: 83 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eShank\u003c\/b\u003e: Ø12 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGrade\u003c\/b\u003e: MT7 – TiAlN-coated sub-micron carbide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Carmex","offers":[{"title":"Default Title","offer_id":40282510524494,"sku":"EMT1212E2720UNJMT7","price":245.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0560\/3747\/4382\/files\/EMT_c8399c26-8bdc-4a37-9d86-03ef49b623b6.png?v=1762874533"}],"url":"https:\/\/www.protool-ltd.co.uk\/collections\/external-thread-mills.oembed","provider":"Protool Precision Tools","version":"1.0","type":"link"}