Blog
What Is Runout in Machining?
July 04, 2026
By Admin
What is runout in machining? Learn how radial and axial runout affect accuracy, finish, tool life and how to measure and reduce them well.
What Insert Grade for Titanium?
July 03, 2026
By Admin
Unsure what insert grade for titanium? Learn how PVD, carbide substrate, edge prep and geometry affect tool life, finish and control.
Spotting Drills Explained for Precision Drilling
July 02, 2026
By Admin
Spotting drills explained for machinists - geometry, use cases, common mistakes and how to choose the right tool for accurate hole starts.
Thread Gauges: Choosing the Right Type
July 01, 2026
By Chris Humphreys
Thread gauges help engineers verify pitch, form and fit quickly. Learn the main types, where each suits best, and how to avoid false readings.
Best Tool Cabinets for Engineers: What to Buy
June 30, 2026
By Chris Humphreys
Find the best tool cabinets for engineers with practical advice on drawer load, security, layout and workshop fit for daily production use.
Toolholding Systems That Improve Machining
June 29, 2026
By Chris Humphreys
Toolholding systems affect accuracy, finish and tool life. Learn how to choose the right holders, interfaces and balance for reliable machining.
Collet Chuck vs Milling Chuck Explained
June 28, 2026
By Chris Humphreys
Collet chuck vs milling chuck - compare run-out, grip, torque and application fit to choose the right toolholder for accurate, reliable milling.
How to Measure Bore Diameter Accurately
June 27, 2026
By Chris Humphreys
Learn how to measure bore diameter accurately using callipers, bore gauges and micrometers, with practical guidance for repeatable workshop results.
Solid Carbide vs Indexable Tooling
June 26, 2026
By Chris Humphreys
Solid carbide vs indexable tooling - compare cost, accuracy, rigidity, cycle time and tool life to choose the right option for your machining work.
Measuring Tools Guide for Machine Shops
June 25, 2026
By Chris Humphreys
A practical measuring tools guide for machine shops, covering core instruments, accuracy limits, selection tips and common inspection mistakes.
Choosing Measuring Instruments for Precision
June 24, 2026
By Chris Humphreys
Choose measuring instruments with confidence. Learn what suits shop floor use, inspection work and tighter tolerances in UK engineering.
Thread Turning Inserts: The Complete Guide to Thread Forms, Profiles & Grades
June 23, 2026
By Chris Humphreys
Thread turning inserts let you single-point any thread on a lathe, internal or external, in almost any material. This guide breaks down every thread form, explains full vs partial vs multi-tooth profiles, shows you how to decode an insert code like 16ER 1.5 ISO, and matches Carmex carbide grades to your material.
Showing 12-24 of 79 Results
