Carbide Burrs for Back Faces & Cross Holes

10 items
Vortex Carbide Burr Type N - Inverted Cone - Single Cut - 3mm Diameter

Vortex Carbide Burr Type N - Inverted Cone - Single Cut - 3mm Diameter

SKU: PRO1500912

CutType Single Cut
Diameter 3
Shank Diameter 3
Head Length 5
Overall Length 38
£5.00 ex VAT
View Product
Vortex Carbide Burr Type N - Inverted Cone - Single Cut - 6mm Diameter

Vortex Carbide Burr Type N - Inverted Cone - Single Cut - 6mm Diameter

SKU: PRO1500913

CutType Single Cut
Diameter 6
Shank Diameter 6
Head Length 8
Overall Length 53
£4.23 ex VAT
View Product
Vortex Carbide Burr Type N - Inverted Cone - Single Cut - 10mm Diameter

Vortex Carbide Burr Type N - Inverted Cone - Single Cut - 10mm Diameter

SKU: PRO1500914

CutType Single Cut
Diameter 10
Shank Diameter 6
Head Length 11
Overall Length 56
£8.46 ex VAT
View Product
Vortex Carbide Burr Type N - Inverted Cone - Single Cut - 12mm Diameter

Vortex Carbide Burr Type N - Inverted Cone - Single Cut - 12mm Diameter

SKU: PRO1500915

CutType Single Cut
Diameter 12
Shank Diameter 6
Head Length 13
Overall Length 58
£12.69 ex VAT
View Product
Vortex Carbide Burr Type N - Inverted Cone - Single Cut - 16mm Diameter

Vortex Carbide Burr Type N - Inverted Cone - Single Cut - 16mm Diameter

SKU: PRO1500916

CutType Single Cut
Diameter 16
Shank Diameter 6
Head Length 16
Overall Length 61
£25.38 ex VAT
View Product
Vortex Carbide Burr Type N - Inverted Cone - Double Cut - 3mm Diameter

Vortex Carbide Burr Type N - Inverted Cone - Double Cut - 3mm Diameter

SKU: PRO1500917

CutType Double Cut
Diameter 3
Shank Diameter 3
Head Length 5
Overall Length 38
£5.00 ex VAT
View Product
Vortex Carbide Burr Type N - Inverted Cone - Double Cut - 6mm Diameter

Vortex Carbide Burr Type N - Inverted Cone - Double Cut - 6mm Diameter

SKU: PRO1500918

CutType Double Cut
Diameter 6
Shank Diameter 6
Head Length 8
Overall Length 53
£4.23 ex VAT
View Product
Vortex Carbide Burr Type N - Inverted Cone - Double Cut - 10mm Diameter

Vortex Carbide Burr Type N - Inverted Cone - Double Cut - 10mm Diameter

SKU: PRO1500919

CutType Double Cut
Diameter 10
Shank Diameter 6
Head Length 11
Overall Length 56
£8.46 ex VAT
View Product
Vortex Carbide Burr Type N - Inverted Cone - Double Cut - 12mm Diameter

Vortex Carbide Burr Type N - Inverted Cone - Double Cut - 12mm Diameter

SKU: PRO1500920

CutType Double Cut
Diameter 12
Shank Diameter 6
Head Length 13
Overall Length 58
£12.69 ex VAT
View Product
Vortex Carbide Burr Type N - Inverted Cone - Double Cut - 16mm Diameter

Vortex Carbide Burr Type N - Inverted Cone - Double Cut - 16mm Diameter

SKU: PRO1500921

CutType Double Cut
Diameter 16
Shank Diameter 6
Head Length 16
Overall Length 61
£25.38 ex VAT
View Product

Inverted cone carbide burrs (Type N) for the burrs you cannot see. Narrow at the shank and wide at the tip, an inverted cone passes through a hole, tips against the far face and cuts on the withdrawal stroke — reaching a back-face burr that no hand scraper will get to.

The same geometry handles the intersection where a cross hole breaks into a bore, one of the hardest burrs to remove in a machined part. The flat top face lets you clean the intersection square rather than rolling the edge over into the bore.

Stocked in single and double cut, 3mm to 16mm head diameter. For access through a small hole, a 3mm head on a 3mm shank will pass through a hole a 6mm head will not.