Europa Tools Long Series Drill - Powder Metal - TiAlN Tipped - 7mm x 290mm

Meet the Europa Tools Long Series Drill in a precise 7mm diameter and 290mm length—designed for deep, reliable holes in metalworking projects. Built from premium powder metal and finished with a TiAlN-tipped edge, this drill balances toughness, edge retention, and smooth cutting through demanding materials. The extended reach helps you tackle deep pockets, through-holes, and hard-to-reach workpieces without swapping to a shorter bit.

Why the Long Series design matters

The 290mm overall length provides substantial reach for thick plates, structures, and assemblies where standard bits struggle. The long geometry reduces the need for multiple tools, saving time on setup and increasing drilling consistency across runs. A true long-series solution for shop floors, garages, and fabrication benches.

Key features that drive real-world results

• Powder metallurgy construction: A refined microstructure delivers uniform grain size, improved toughness, and better resistance to chipping under load—keeping the drill true as you push deeper.
• TiAlN coating on the tip: Enhanced hardness and heat resistance reduce wear during high-temperature cutting, maintaining a sharp edge for longer and promoting cleaner holes.
• 7mm x 290mm specification: Precisely sized for typical metalworking tasks while offering extended reach to access interior features without repositioning the workpiece.
• Versatile drilling performance: Suited for steel, cast iron, aluminum, and other common metals, making it a dependable workhorse in fabrication, automotive, and DIY shops.
• Precision and control: The design emphasizes straight, true holes with minimal wandering, improving secondary operations such as tapping or press-fit insert installation.

Ideal uses and practical tips

• Use on drill presses and power drills with a compatible chuck—maintain alignment and use a steady feed to maximize edge life.
• For metals, pair with appropriate cutting fluid or lightweight oil to reduce heat buildup and extend tool life, especially on tougher materials.
• Start with a light pecking routine to clear chips, then advance to a steady pace as the bit bites deeper into the material.
• Inspect the tip after heavy use; TiAlN coatings can reveal wear patterns—if the edge dulls, consider re-sharpening or replacing to preserve hole accuracy.

Engineered for professionals and serious hobbyists alike, the Europa Tools Long Series Drill embodies precision, durability, and practical performance in one extended-reach bit. When deep, accurate holes matter, this 7mm x 290mm drill is ready to deliver consistent results project after project.